ATen PE8324 Bedienungsanleitung

ATen Anbaustein PE8324

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen PE8324 (106 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/106

eco PDU PE Series

PE7214 / PE7216 / PE7324 / PE7328 / PE8121kJ / PE8216 / PE8316G /

PE8324 / PE8324A / PE8324JA / PE9216 / PE9222 / PE9324 / PE9330

Power Distribution Unit

User Manual

www.aten.com

eco PDU PE Series User Manual

FCC, CE Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

CE Warning: This is a class A product. In a domestic environment this product

may cause radio interference in which case the user may be required to take

adequate measures.

NOTE: The KJ and J model series do not meet or qualify for FCC or CE

certification, as they are produced for countries outside the FCC’s jurisdiction.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

eco PDU PE Series User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual are subject to change

without prior notification by the manufacturer. The manufacturer makes no representations or

warranties, either expressed or implied, with respect to the contents hereof and specifically

disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the

manufacturer's software described in this manual is sold or licensed as is. Should the programs

prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its

dealer), assumes the entire cost of all necessary servicing, repair and any incidental or

consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by

unauthorized modifications to this device. It is the responsibility of the user to correct such

interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the

correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT

THE VOLTAGE SETTING IS CORRECT BEFORE USE.

PE Device Safety Notice

International http://eservice.aten.com

International 886-2-8692-6959

China 86-10-5255-0110

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

United Kingdom 44-8-4481-58923

Set the maximum permissible breaker protection in the building circuitry to the

current rating specified on the rating plate. Observe all national regulations and

safety codes as well as deviations for breakers.

Only connect the PE Device to a grounded power outlet or a grounded system!

Make sure that the total current input of the connected systems does not exceed

the current rating specified on the rating plate of the PE Device.

There is a risk of explosion if the battery is replaced with an incorrect type.

Dispose of used batteries according to the relevant instructions.

Produktspezifikationen

Marke:	ATen
Kategorie:	Anbaustein
Modell:	PE8324
Gewicht:	6500 g
Produktfarbe:	Schwarz
Energieschutzeigenschaften:	Überlastschutz
Stecker:	NEMA L6-30P
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Paketgewicht:	10500 g
Montage:	Senkrecht
Zertifizierung:	FCC 15 A\r\nTUV-CB
Display:	LED
Kabellänge:	1.6 m
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 60 °C
Luftfeuchtigkeit bei Lagerung:	0 - 80 %
Abmessungen (BxTxH):	66 x 44 x 1775 mm
Verpackungsinhalt:	1x PE8324 eco PDU\r\n1x Standard Rack Mount Kit\r\n1x CD-ROM (Manual, eco Sensors Software)\r\n1x User Instructions
Nachhaltigkeitszertifikate:	RoHS
Verpackungsabmessungen (BxTxH):	210 x 170 x 1890 mm
Anzahl der AC-Ausgänge:	24 AC-Ausgänge
AC-Steckertypen:	C13 coupler, C19 coupler
Stromstärke (maximal):	30 A
Nominale Eingang Spannung:	100-240 V
Nominale Ausgang Spannung:	100-240 V
Rack-Kapazität:	0U
PDU-Typen:	Metered, Monitored
Überwachung:	Current, Humidity, Temperature
Ladekapazität:	6240 VA