ATen CS261 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen CS261 (22 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/22
CS261 / CS261TK
DVI Computer Sharing Device
RS232 Commands
V1.0
User Manual
www.aten.com
CS261 / CS261TK RS-232 Control Tool
2
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
Warning: Operation of this equipment in a residential environment could
cause radio interference.
KCC Statement
RoHS
This product is RoHS compliant
.
CS261 / CS261TK RS-232 Control Tool
3
RS-232 Operation
Overview
The CS261 / CS261TK’s built-in bi-directional RS-232 serial interface allows
system control through a high-end controller or PC. RS-232 serial operations
in a CS261 / CS261TK installation are managed via HyperTerminal sessions
on systems that are running Windows. In order to use this feature to send
commands to the CS261 / CS261TK, you must first download and install a
HyperTerminal application. For more detailed instructions and information
about each of the commands provided in this manual, please refer to the
original CS261 / CS261TK user manual.
Setup
Install a HyperTerminal application on a computer that is not part of the CS261
/ CS261TK setup, which will be connected and used to control the CS261 /
CS261TK via RS-232. HyperTerminal applications can be download from the
internet, and many operating systems are embedded with HyperTerminal
applications.
Hardware Connection
Use an RJ-11 to DB-9 serial adapter (ATEN model no.: LIN5-04A2-J11G) to
connect the computer’s serial port to the Serial port of the CS261 / CS261TK,
as shown below:


Produktspezifikationen

Marke: ATen
Kategorie: Nicht kategorisiert
Modell: CS261

Brauchst du Hilfe?

Wenn Sie Hilfe mit ATen CS261 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ATen

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-