ATen CE611 Bedienungsanleitung

ATen Schalter CE611

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen CE611 (22 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 33 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/22

Mini USB DVI HDBaseT™ KVM Extender

CE611 User Manual

www.aten.com

CE611 User Manual

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

The device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

Warning: Operation of this equipment in a residential environment could

cause radio interference.

Suggestion: Shielded twisted pair (STP) cables must be used with the unit to

ensure compliance with FCC & CE standards.

KCC Statement

유선 제품용 / A 급 기기 ( 업무용 방송 통신 기기 )

이 기기는 업무용 (A 급)전자파적합기기로서 판매자 또는 사용자는 이

점을 주의하시기 바라며 ,가정 외의 지역에서 사용하는 것을 목적으로

합니다 .

RoHS

This product is RoHS compliant.

CE611 User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual

are subject to change without prior notification by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties as to merchantability or fitness for any particular purpose. Any of

the manufacturer's software described in this manual is sold or licensed as is.

Should the programs prove defective following their purchase, the buyer (and

not the manufacturer, its distributor, or its dealer), assumes the entire cost of all

necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV

interference caused by unauthorized modifications to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation

of this system if the correct operational voltage setting was not selected prior

to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS

CORRECT BEFORE USE.

International http://eservice.aten.com

International 886-2-8692-6959

China 86-400-810-0-810

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

1-949-428-1111

Produktspezifikationen

Marke:	ATen
Kategorie:	Schalter
Modell:	CE611
Upgradefähige Firmware:	Ja
AC-Netzadapter:	Ja
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Material:	Metall
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Zertifizierung:	RoHS
Typ:	Sender und Empfänger
Betriebsanleitung:	Ja
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 60 °C
Luftfeuchtigkeit bei Lagerung:	0 - 80 %
Energiebedarf:	Gleichstrom
RS-232 port:	2
PC Audio-Eingang:	Ja
Maximal mögliche Übertragungsstrecke:	100 m
unterstütze Kabeltypen:	Cat6, Cat6a
USB Datenübertragungsraten:	480 Mbit/s
Empfängergewicht:	340 g
PC Audio Ausgang:	Ja
Auflösung (maximal, digital):	1920 x 1200 Pixel
Anzahl RJ-45-Anschlüsse:	2
Gewicht Transmitter:	350 g
Unterstütze Auflösung:	1920x1200\n1920x1080\n1600x1200
Stromverbrauch (Sender) (max.):	2.494 W
Stromverbrauch (Empfänger) (max.):	4.816 W
Breite des Empfängers:	128 mm
Tiefe des Empfängers:	86.9 mm
Höhe des Empfängers:	25 mm
Breite des Senders:	128 mm
Tiefe des Senders:	86.9 mm
Höhe des Senders:	25 mm
Transmitter lokaler Tastatur-/Maus-Anschlusstyp:	USB
Empfänger lokaler Video-Anschlusstyp:	DVI-D
Empfänger lokale Tastatur/Maus-Anschlusstyp:	USB
Anzahl RJ-45-Anschlüsse (Sender):	1
Anzahl RJ-45-Anschlüsse (Empfänger):	1
Transmitter-Video-Anschlusstyp:	DVI-D