ATen CE604-AT-G Bedienungsanleitung

ATen Schalter CE604-AT-G

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen CE604-AT-G (43 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/43

DVI Dual View KVM Extender

CE604

User Manual

www.aten.com

CE604 User Manual

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE

STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

The device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this

equipment.

CE Warning: This is a class A product. In a domestic environment this

product may cause radio interference in which case the user may be required to

take adequate measures.

Suggestion: Shielded twisted pair (STP) cables must be used with the unit to

ensure compliance with FCC & CE standards.

KCC Statement

RoHS

This product is RoHS compliant.

CE604 User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice



All information, documentation, and specifications contained in this manual are

subject to change without prior notification by the manufacturer. The manufacturer

makes no representations or warranties, either expressed or implied, with respect to

the contents hereof and specifically disclaims any warranties as to merchantability

or fitness for any particular purpose. Any of the manufacturer's software described

in this manual is sold or licensed as is. Should the programs prove defective

following their purchase, the buyer (and not the manufacturer, its distributor, or its

dealer), assumes the entire cost of all necessary servicing, repair and any incidental

or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV

interference caused by unauthorized modifications to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of

this system if the correct operational voltage setting was not selected prior to

operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT

BEFORE USE.



This ATEN product is specifically designed and manufactured for the operation

and management of computer mainframe and communications equipment used in

network management centers. As such, it may not be completely appropriate for

those environments and sites where special standards for performance and high

reliability are required – such as military equipment, traffic management, nuclear

facilities, security systems, communications equipment, medical facilities, etc.

International http://eservice.aten.com

International 886-2-8692-6959

China 86-400-810-0-810

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

1-949-428-1111

Produktspezifikationen

Marke:	ATen
Kategorie:	Schalter
Modell:	CE604-AT-G
Gewicht:	1990 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Material:	Metall
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Verpackungsbreite:	98 mm
Verpackungstiefe:	325 mm
Verpackungshöhe:	210 mm
Paketgewicht:	2058 g
Netzteil Ausgangsspannung:	5.3 V
Warentarifnummer (HS):	84733080
Typ:	Sender und Empfänger
Betriebsanleitung:	Ja
LED-Anzeigen:	Link, Power
Temperaturbereich bei Lagerung:	-20 - 60 °C
Luftfeuchtigkeit bei Lagerung:	0 - 80 %
Rack-Einbau:	Ja
Anzahl Produkte pro Versandkarton:	5 Stück(e)
Gewicht Versandkarton:	11000 g
Länge des Versandkartons:	512 mm
Breite des Versandkartons:	342 mm
Höhe des Versandkartons:	232 mm
Schnellinstallationsanleitung:	Ja
Maximal mögliche Übertragungsstrecke:	60 m
unterstütze Kabeltypen:	Cat5, Cat5e
Empfängergewicht:	490 g
Auflösung (maximal, digital):	1920 x 1200 Pixel
Gewicht Transmitter:	490 g
Nettogewicht Hauptkarton:	9950 g
Unterstütze Auflösung:	1920 x 1200, 1024 x 768
Breite des Empfängers:	202 mm
Tiefe des Empfängers:	86.7 mm
Höhe des Empfängers:	25 mm
Breite des Senders:	202 mm
Tiefe des Senders:	85.3 mm
Höhe des Senders:	25 mm
Transmitter lokaler Tastatur-/Maus-Anschlusstyp:	USB
Empfänger lokaler Video-Anschlusstyp:	DVI-D
Empfänger lokale Tastatur/Maus-Anschlusstyp:	USB
Anzahl RJ-45-Anschlüsse (Sender):	2
Anzahl RJ-45-Anschlüsse (Empfänger):	2
Transmitter-Video-Anschlusstyp:	DVI-D