ATen BP72V18AH Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen BP72V18AH (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1 Important Safety Instructions
Please comply with all warnings and operating instructions in this manual strictly. Read
the following instructions carefully before installing the unit. Do not operate this unit
before reading through all safety information and operating instructions carefully.
Do not try to repair the unit yourself, contact your local supplier or your warranty
will be void.
To eliminate any overheating of the battery box, keep all ventilation openings free
from obstruction and do not place any foreign objects on top of the battery bank.
Keep the battery box 20cm away from the wall.
Make sure the battery box is installed within the proper environment as specified.
(0-40°C and 30-90% non-condensing humidity)
Do not install the battery box under direct sunlight. Your warranty will be void if the
batteries fail due to overheating.
This battery box is not designed for use in dusty, corrosive and salty environment.
The warranty for this battery bank will be void if water or other liquid is spilt or
poured directly onto the battery box. Similarly we do not warrant any damage to
the battery box if foreign objects are deliberately or accidentally inserted into the
battery box enclosure.
The battery will discharge naturally if the system is unused for a period of time.
It should be recharged every 2-3 months if unused. If this is not done, then the
warranty will be null and void. During normal operation, the batteries will be
automatically remained in charged condition.
Servicing of batteries should be performed or supervised by trained personnel with
knowledge of batteries and the required precautions.
When replacing batteries, it is necessary to replace ALL batteries with the same
quantity, type & capacity.
CAUTION – Do not dispose of battery or batteries in a fire. The battery may
explode.
CAUTION – Do not open or mutilate the batteries. The electrolyte from the
batteries is toxic and harmful to the skin and eyes.
CAUTION – Risk of Electric Shock –Hazardous voltage may exist between battery
terminals and ground. Test before touching with bare hands.
CAUTION – A battery can present a risk of electrical shock and high short circuit
current. The following precaution should be observed when working on
batteries:
1. Remove watches, rings, or other metal objects.
2. Use tools with insulated handles.
3. Wear rubber gloves and boots.
4. Do not lay tools or metal parts on top of batteries.
5. Disconnect charging source prior to connecting or disconnecting battery
terminals.
Do not plug or unplug the battery connector if UPS works in DC (discharging)
mode.
2 Product Overview and Setup
NOTE: Before installation, please inspect the unit. Be sure that nothing inside the
package is damaged. Please keep the original package in a safe place for future
use.
2.1 Rear Panel View
DC connector: connects to either UPS or a 2
nd
battery box
DC breaker: Battery over-current protection breaker
2.2 Installation and Setup with UPS
Unpacking and Inspection
1. Remove the battery box from the packing.
Note: The battery box is very heavy, be cautious when unpacking and lifting
the unit to avoid injury.
2. Check the inside package
Battery box unit
Quick guide
Battery connection cable x 1
Ear x 2 & screw x 8
Extended stand
Battery Box User Manual
Battery connection cable
Ears Screws
Extended stand
Selecting Installation Position
It is necessary to select a proper environment to install the unit in order to
minimize the possibility of damage to the battery box and extend the life of the
batteries. Please follow the instructions below:
1. Keep at least 20cm (8 inches) clearance from the rear panel of the unit from the
wall or other obstructions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in accordance
with the unit’s working specifications to avoid overheat and excessive moisture.
4. Do not place the unit in a dusty or corrosive environment or near any
flammable objects.
5. This unit is not designed for outdoor use.
2.3 Mounting
This unit can either be rack mounted or placed vertically on the desk.
Rack Mount
Vertical (Tower) Desktop Mount
2.4 Connecting to UPS or Another Battery Box
Follow the diagrammatic instructions below to connect your battery box to a UPS
or another battery box:
2.5 Available Battery Specs
This battery box has been designed to operate with the following batteries:
24V18AH: 4 pieces of 12V 9Ah batteries
36V18AH: 6 pieces of 12V 9Ah batteries
48V18AH: 8 pieces of 12V 9Ah batteries
72V18AH: 12 pieces of 12V 9Ah batteries
3 Storage & Maintenance
The unit contains no user-serviceable parts. If the battery service life (3~5 years at
25°C ambient temperature) has been exceeded, the batteries must be replaced. In
this case, please contact your dealer.
Storage
Before storing, charge the unit for 4 hours. Store the unit covered and upright in a
cool, dry location. During storage, follow the instructions shown in the table:
Storage Temperature Recharge Frequency Charging Duration
-25°C - 40°C Every 3 months 1-2 hours
40°C - 45°C Every 2 months 1-2 hours
Be sure to deliver the spent battery to a recycling facility or ship it
to your dealer in the replacement battery packing material.


Produktspezifikationen

Marke: ATen
Kategorie: Nicht kategorisiert
Modell: BP72V18AH

Brauchst du Hilfe?

Wenn Sie Hilfe mit ATen BP72V18AH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ATen

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-