ATen 2X-010G Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ATen 2X-010G (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
1
All informaon, documentaon and specicaons contained in this media are subject to change without prior nocaon by the manufacturer.
Please visit our website to nd the most up- -date version. to
Oponal Rack Mount Kits Installaon Guide
Introducon
For LCD KVM Switches/Consoles, ATEN provides a variety of oponal rack mounng opons to provide:
1) Flexibility
A long-railed version of your standard mounng kit lets you t your device to racks with greater depth.
2) Convenience
Easy Installaon Rack Mount Kits are designed to be easy to install and can be installed by one person.
Standard Installaon Rack Mount Kit (Long)
Package Contents
1 Standard Installaon Rack Long Rail Set (2X-010G/2X-023G/2X-040G) x
Compable LCD KVM Units
Refer to the table below for the compable mounng kit and the rack depth for different LCD KVM
Switches/Consoles.
LCD KVM Switch / LCD Console Model
Standard Installaon Rack Mount Kit (Long)
Compable Subtype
Rack Depth (cm)
CL3000N,
CL5708N, CL5716N, CL5708IN, CL5716IN,
CL5800N, CL5808N, CL5816N,
CL6700MW, CL6708MW
Standard Installaon Long (2X-010G)
70105
CL1008M, CL1016M,
CL5708M, CL5716M, CL5708IM, CL5716IM,
KL1108VN, KL1116VN,
KL1508AN, KL1516AN, KL1508AiN, KL1516AiN,
KL1508AM, KL1516AM, KL1508AiM, KL1516AiM
Standard Installaon Long (2X-010G)
68105
CL1000M
Standard Installaon Long (2X-010G)
68100
CL1000N, CL1308N, CL1316N
Standard Installaon Long (2X-023G)
70105
CL3108NX, CL3116NX,
CL3884NW
Standard Installaon Long (2X-040G)
70105
CL3100, CL3700, CL3800
Standard Installaon Long (2X-040G)
70100
Note:
- It takes two people to mount the console.
- The standard rack mounng kit does not include screws or cage nuts. If you need addional screws or cage nuts,
contact your rack dealer.
2
All informaon, documentaon and specicaons contained in this media are subject to change without prior nocaon by the manufacturer.
Please visit our website to nd the most up- -date version. to
Components -010G and 2X-023G 2X
Hardware Installaon -010G and 2X-023G 2X
Since installaon for 2X-010G and 2X-023G mounng kits and the corresponding LCD KVM switches / LCD consoles
are the same, one combinaon will be used as the example instrucons below.
1. Have one person posion the unit in the rack and hold it steady. Have the second person screw the front
brackets to the rack.
3
All informaon, documentaon and specicaons contained in this media are subject to change without prior nocaon by the manufacturer.
Please visit our website to nd the most up- -date version. to
2. While the rst person sll holds the unit in place, the second person slides the le and right L-shaped brackets
into the units side mounng brackets from the rear, installing four screws in the tabs to secure them in place.
3. Aer the L-shaped brackets are secured, ghten all the screws.
Allow at least 5.1 cm on each side for proper venlaon, and at least 12.7 cm at the back for the power cord
and cable clearance.
Components -040G 2X


Produktspezifikationen

Marke: ATen
Kategorie: Nicht kategorisiert
Modell: 2X-010G

Brauchst du Hilfe?

Wenn Sie Hilfe mit ATen 2X-010G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ATen

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-