Atdec TH-UWM Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Atdec TH-UWM (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Installation Instructions
TH-UWM
Universal Wire Mount
Component Checklist
Hardware
IMPORTANT INFORMATION
! IMPORTANT - Install Telehook Universal Wire Mount as per Installation Instructions.
!
This product supports a maximum load of 50kg (110lbs).
!
This product supports VESA and Universal mounting hole configurations from 200mm up to 800mm wide (8”-31.5”).
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware above.
Tools Required:
Phillips head screwdriver
Power drill
4.5mm (
3
/
16
”) drill bit
10mm (
3
/
8
”) masonry drill bit
10mm (
3
/
8
”) drill bit
10mm (
3
/
8
”) socket wrench
Spirit level
Step 2. Fix Universal Wire Mount to Display
Display Mounting Screws:
Wire Reel Assembly
Cable Access Support
M5 x 16mm / M5 x 25mm (x4 each)
M6 x 16mm / M6 x 25mm (x4 each)
M8 x 16mm / M8 x 25mm (x4 each)
Long
Spacer (x4)
Lower Support
M5 Bush (x2)
TM
Hook Plates
(x2)
Flange
Screw (x2)
Short
Spacer (x4)
Dry Wall
Anchor (x2)
Concrete
Anchor (x2)
1 Grip the Wire Reel Assembly
as shown above. Pull firmly to
release wire to suit the Display
mounting hole pattern.
2 Select the appropriate hardware (supplied) to fasten the Wire Reels
LOOSELY to the back of the Display. Use top two mounting holes.
TIP: Only screw in half-way.
OPTIONAL: Use Short or Long Spacers
to pack recessed mounting holes. When
using M5 Mounting Screws use
the M5 Bushes supplied.
M5 Bush
Spacer
Mounting Screw
NOTE: All orange pads
should be facing outwards.
Cable
Access Support
Lower
Support
TOP
3 Fasten Cable Access Support and Lower Support FIRMLY to the
bottom two mounting holes.
PULL
FIRMLY
Wire Reel
Step 3. Tension Wire
Timber Stud Masonry Wall
Drill two holes 60mm deep using a
4.5mm
(
3
/
16
”)
drill bit.
Drill two holes 60mm (2.36”) deep using
a 10mm
(
3
/
8
”)
masonry drill bit.
Choose from one of the following mounting options (below): , Timber Stud Masonry Wall Dry Wall, or . Fasten the Hook Plates
to the wall, 150-500mm (6”-20”) apart (to suit wire length), using the appropriate mounting hardware supplied.
Step 4. Mount Hook Plates on Wall
CLICK
2 Fully tighten the Mounting Screws through both Wire Reels.
This will engage the internal reel lock mechanism.
TIP: FIRMLY Tighten as as possible.
3 For extra wire tension, twist the Wire Reels
in opposite directions (shown above).
TIP: Re-tighten Mounting Screws if necessary.
Mounting Screw
Hook Plate (x2)
Concrete Anchor
Dry Wall Anchor (x2)
Drill two holes using a 10mm
(
3
/
8
”)
drill bit.
Flange Screw
(x2)
Flange Screw
(x2)
Step 5. Hang Display on Wall Step 6. Cable Management
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 16.05.11 ©
1 Gently lower the display until the wire is hanging over
the Hook Plates.
2 Use a spirit level to ensure the Display is hanging correctly.
1 Pull the bottom edge of the Display away from the wall
and fold out Cable Access Support.
2 Connect cables.
3 Fold in Cable Access Support to return the Display to flat
against the wall.
Cable Access
Support
WALL
Spirit level
Dry Wall 10-13mm thick. (0.4”-0.5”)
Ensure Dry Wall is in good condition,
with no sign of water damage or cracking.
1 Grip the lower half of the Wire Reel.
With your other hand twist the top,
taking in any slack in the wire
(repeat for opposite Wire Reel).


Produktspezifikationen

Marke: Atdec
Kategorie: Nicht kategorisiert
Modell: TH-UWM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atdec TH-UWM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Atdec

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-