Atdec TH-2250-VF Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atdec TH-2250-VF (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 143 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
RO RO
Plastic Anchor (x4)
Self-Tapping Screw (x4)
Hardware
Dry Wall Anchor (x4)
M6 Washer
(x4)
M4x12/25/30mm
(x4 each)
M5x12/25/30mm
(x4 each)
M6x12/25/30mm
(x4 each)
Display Mounting
Screws
Self-Tapping Screw
M6 Washer
Wall Plate
Plastic Anchor
8mm (
5
16
") Hole
Dry Wall
Timber Stud
10mm (
3
8") Hole
Dry Wall Anchor
Dry Wall Anchor Screw
M6
Washer
Wall Plate
Self-Tapping Screw
M6 Washer
Wall Plate
4mm (
3
16") Hole
Timber Stud
13mm Spacer
Bush (x4)
20mm Spacer
Bush (x4)
M5x10mm
Security Screw (x4)
Components Checklist
Wall Plate
Display Plate
IMPORTANT INFORMATION
! IMPORTANT - Install Wall Mount as per Installation Instructions.
! This product supports a maximum load of 50kg (110lbs).
! This products only supports VESA compliant displays with 50mmx50mm (2"x2"), 75mmx75mm (3"x3"),
100mmx100mm (4"x4"), 120mmx180mm (4¾"x7"), 200mmx100mm (8"x4") and 200mmx200mm
(8"x8") mounting hole patterns.
! The manufacturer does not accept responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the component checklist and Hardware above.
Step 2. Mounting the Wall Plate
Tip: Use a spirit level to ensure wall plate is horizontal
Masonry Wall
Tools Required:
Power Drill

4mm (
3
16
") drill bit

Phillips Head screwdriver 
8mm (
5
16
") masonry drill bit

10mm (
3
8
")
drill bit

Spirit Level

Installation Instructions
Display
Wall Plate Slots
Display Plate Side Flange
Display
M5 Security
Screw
Mounting Screw
Back of Display
Display Plate
Recessed Mounting Holes
If the mounting holes are reccessed into the back of the
display, use the supplied Spacer Bushes to pack the
recessed holes. Ensure that the correct length mounting
screws are used to securely attach the plate to the display.
TOP
Mounting Screw
Back of Display
Display Plate
Spacer Bush
Recessed
Mounting Hole
Step 3. Mounting the Display Plate
With the Display Plate attached
to the Display, lift the Display,
slide into the Wall plate. Ensuring
that the side flanges engage into
wall plate slots.
Step 4. Attaching Display to Wall Plate
To properly secure the display
to the wall it is recommended
to used the four M5 security
screws to securely attach the
two plates together.
Step 5. Security Option
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 01.03.10 ©


Produktspezifikationen

Marke: Atdec
Kategorie: Nicht kategorisiert
Modell: TH-2250-VF
Produktfarbe: Silber
Befestigungstyp: Wand
Paketgewicht: 1600 g
Projektionsflächenkapazität: 20 - 47 "
Verpackungsabmessungen (BxTxH): 254 x 36 x 238 mm
Montageschnittstelle: VESA 100mm x 100mm / 100mm x 200mm / 200mm x 200mm
Gewicht (max.): 50 kg

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atdec TH-2250-VF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Atdec

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-