Atdec A-STSWW Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Atdec A-STSWW (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Installation Instructions
Wall Mounted
Sit-to-Stand Workstation
Component Checklist
Step 1. Check Components
AB C D E
Lower Arm Upper Arm Vertical Screen
Slider Keyboard Tray Tilt Head
A-STSWW
• 8mm wrench
• Drill
• 10mm masonry bit
• 4.5mm drill bit
• Ratchet
• Spirit Level
• Stud Finder
• Pencil
5mm Allen 6mm Allen2.5mm Allen
M6X8 (x1) M4x10 (x4)M6X12 (x4)M8X20 (x1)
8mm
¼” Drive
Velcro
Strip (x2)
H J K L M N
PO Q R S T
Tools Required
Plastic
Washer (x1)
Coach
Screw (x6) Nylon
Anchor (x6)
Metal
Washer (x1)
M6X10 (x3)
Hardware
F G
Wall Mounting Hardware
Check that you have received all parts against the Component Checklist.
! IMPORTANT - Install as per Installation Instructions
! The manufacturer accepts no responsibility for incorrect installation.
! This product supports a maximum load 8Kg (17.6lbs.)
! The wall mount can be installed on vertical, flat, solid concrete or brick walls, or timber stud walls only.
! The wall should be strong enough to sustain a weight of at least four times that of the display and wall mount bracket combined.
If in doubt, consult a structural engineer.
! Check wall anchors and screws every 3 months from the time of installation to ensure the workstation is firmly fixed to the wall.
! Tighten all screws (do not exert excessive force to avoid breaking the screws or damaging their thread)
IMPORTANT INFORMATION
2.3
2.4
2.5
F
L
A
G
Wall Plate
Remove top and
bottom covers from
the wall plate.
Push nylon
anchors into
each hole.
Fix wall plate to
the wall using 6
coach screws
10mm
55mm
Wall 2.1
2.2
H
o
l
e
D
i
m
e
n
s
i
o
n
s
Spirit
Level
2.3
2.4
F
L
A
Wall Plate
Remove top and
bottom covers from
the wall plate.
Fix wall plate to
the wall using 4
coach screws
4.5mm
55mm
Stud
2.2
H
o
l
e
D
i
m
e
n
s
i
o
n
s
2.1
Spirit
Level
Step 2. Option B - Stud wall installation
Tip: Screw in the top coach screw first.
Use the supplied template
to mark and drill 4 holes
into the wall.
Two people
required
Note: Use a stud finder to ensure
all holes are drilled into the stud.
Step 2. Option A - Masonry or cement wall installation
Tip: Screw in the top coach screw first.
Use the supplied template
to mark and drill 6 holes
into the wall.
Two people
required
Note: For optimum performance, use a spirit
level to ensure straight installation.
5.1 Drop screw head into
keyhole slot in upper
arm plate.
JQ
5.2
Screw limits screen
rotation to 90°
Remove screw for
360° rotation
90° 360°
5mm
Note: do not tighten screw ‘Q’
J
P
Q
C
D
4.1 4.2
Step 4. Assemble slider to keyboard trayStep 3. Assemble upper arm
Step 5. Assemble slider to keyboard tray
Step 6. Attach tilting head to screen Step 7. Step 8. Attach screen to arm Replace covers

Produktspezifikationen

Marke: Atdec
Kategorie: Nicht kategorisiert
Modell: A-STSWW
Breite: 1000.76 mm
Gewicht: 11410 g
Produktfarbe: Silber
Höhe: 307.34 mm
Höhenverstellung: Ja
Befestigungstyp: Wand
Höchstgewichtskapazität: 7.9 kg
Gehäusematerial: Aluminium, Composite, Plastic, Steel
Montageset: Ja
Schwenkbereich: 90 - 90 °
Neigungswinkelbereich: 35 - 5 °
Länge (mm): 1445.26 mm
Maximale Bildschirmgröße: - "
Minimum Bildschirmgröße: - "
Minimale VESA-Halterung: 75 x 75 mm
Maximale VESA-Halterung: 100 x 100 mm
Abstand zur Wand (min): 321.8 mm
Verbessertes Kabelmanagement: Ja
Armlänge: 2694.94 mm

Brauchst du Hilfe?

Wenn Sie Hilfe mit Atdec A-STSWW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Atdec

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-