ART X-15 Bedienungsanleitung

ART Regler X-15

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr ART X-15 (14 Seiten) in der Kategorie Regler. Dieser Bedienungsanleitung war fĂĽr 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/14
X-15 USER MANUAL TABLE OF CONTENTS
INTRODUCTION 1
CONNECTIONS 2
Power Input 2
MIDI OUT 2
MIDI IN 2
MIDI THRU 2
BY ASS/DC Footswitch 2P
TELL- ALES/CONTROLS 2T
Numeric Display 2
Power Up 2
LED lndicators 2
Activator Pads 2
Expression Pedals 2
OPER TION 3A
MODES 3
PRESET MODE 3
EFFECT MODE 4
BY ASS MDDE 4P
SETUP MODE 4
S VING EDlTED ARAMETERS 7A P
MISCELLANEOUS 7
APPENDIX A
Programmlng Examples 7
Edit Controlled Device's MIDI Program able (MPT)T
wlth the X-15 8
Setup an A T Multiverb, DR-X, or SGE forR
MIDI Control of the Pitch Parameter of
the Pitch ransposer 8T
Using the X-15 to urn On or O Eects inT
a Preset Uslng Eect Mode and Activator 8
APPENDIX B
Connectlon Illustrations 9, 10
APPENDIX C
System Exclusive Messages 11
Unit Handshake Group 12
Parameter Exchange Group 12
Unit Status Group 12
Parameter Exchange Data Format 12
APPENDIX D
MIDI: Controllers & Numbers 13
SCALING: Suggestion Settings 13
TROUBLESHOOTING 14
WARRANTY & SERVICE INFORM TION 14A
INTRODUCTION
Congratulations and thank you for purchasing the new ART
X-15
ULTRAFOOT
Digital Real Time Effects Control System.
The ART
X-15
ULTRAFOOT puts the power of real time control at your feet in
a format that is super-easy to use. The power of the
X-l5
is awesome. The
ART
X-15
ULTRAFOT
is a real time MIDI foot controller capable of sending
MIDI Program Message Changes to
any
MIDI controlled device,
AND,
control
MIDI assignable parameters via the TWO real time expression pedals on board,
AND, access individual effects of ART SGX and ALPHA effects processors.
FEATURES:
-
Instant access of individual effects
-
TWO real time assignable expression pedals
-
Simple, “plug in and go” operation
-
DC bypass out jack for use with older units
-
Rugged steel assembly
-
MIDI IN, OUT,
&,
THRU
-
Send MIDI data on three separate channels at once
-
Durable composite activator pads
-
Mode select allows multifunction use
-
Non-Volatile memory, stores and remembers your
changes
-
Bright visible program display
-
Switchable LED indicator lights
-
Extra heavy-duty scuff resistant paint
-
Dump parameters to MIDI storage device
The
X-15
ULTRAFOOT is a simple device to use extending the flexibility of any
MIDI controlled device. For instructions on how to implement and use the X-15 in
your system, please read and refer to the rest of this manual.
CONNECTIONS
Only two connections made to the rear of the
X- 51
are needed
for operation. The only accessories you will need to use
your
X- 51
ULTRAFOOT is a power source and MIDI cable(s).
Power
Input
Plug the power adapter into a proper power outlet then con-
nect to the
X-15.
The MIDI output jack is used to transmit all MIDI control in-
formation from the
X-15
to whichever MIDI device you wish
to control. Connect the MIDI cable to the 5 pin MIDI OUT
jack on the
X-15
and then to the MIDI IN jack of the device
you are going to control.
This jack receives the MIDI signal containing the MIDI
messages. It enables you to “talk” to the
X-15
from an
external source such as a computer equipped with MIDI
ports and associated software or a sequencer. Actually, you
may use any MIDI device to send messages to the
X-15.
Any MIDI information sent to the MIDI In jack is echoed to
the MIDI Thru jack.
THRU
A MIDI Thru jack is provided on the
X-15
allowing you to
continue a chain of MIDI devices and let MIDI information
pass
“thru”
the unit to the next one. Information leaving the
Thru jack is a direct copy of the MIDI messages received at
the MIDI In jack. The information is buffered so the integrity
of the signal is not degraded when passing thru.
All
MIDI Jacks are standard
5
pin DIN connectors utiliz-
ing standard MIDI connections. No phantom power is
present on the unused terminals. ART recommends
these unused terminals remain unused.
See Appendix B for MIDI hook-up illustrations.
FOOTSWITCH
Expression Pedals
A standard
1/4"
jack is the output port for a variety of
foot-
Here are the two pedals that make the
X-15
the ultimate
switch configurations. This jack may be programmed to MIDI foot controller. The two expression pedals may be pro-
operate in conjunction with the BYPASS pad as a momen- grammed individually to control any MIDI controllable para-
tary open or closed switch or an
on/off
switch. Some amp meter i ANYn MIDI device. These pedals produce a control
channel switching or other switch applications could be voltage using an optical encoding device which is converted
done using this jack. Use a standard two conductor guitar into MIDI information. Try to avoid shining extremely bright
cord to connect this jack to its intended termination. A lights into the pedals. No harm will come to the device, but,
standard two conductor speaker cable may also be used you. may affect the operation of the encoders by creating
since no audio is being passed along the conductors. unwanted information.
TELL-TALES/CONTROLS
The Seven Segment Numeric Display keeps you constantly
informed of your Preset Number, Expression Pedal values,
MIDI Channel, Programming Characters, and Error Messages.
AlI
information is displayed using decimal based numbers in
most cases.
Power up
When power is first applied to the X-15, it runs through an
autotest
sequence turning on everything that lights up for
about a second, then it displays “Art” indicating everything
is fine. This allows the user to be sure that all display
elements are working and that displayed information will be
accurate.
During power-up the X-15 performs a checksum of the ROM
contents, if there is an error, an error message will appear in
the display. If the ROM checksum is incorrect, “E-C” will
display for ten seconds, press any pad to operate normally.
In the event power is interrupted for a brief period of time
and the
X-15
does not reset itself properly, just unplug and
plug back in the power plug at the power in jack.
LED Indicators
LEDs
located in the upper left hand corner of the activator
pads 1 through 10 indicate which pad is active. The MODE
and BYPASS activator pads have their indicator
LEDs
located towards their upper right corner. These
LEDs
are
also used to indicate the different programming modes you
may be in.
Activator
Pads
Pads on the pedal are labeled from left to right: Select
Arrow UP and Arrow DOWN, MODE, BYPASS, l/EXCITER,
2/COMPRESSOR,
3/DlSTORTlON,
4/EQUALlZER,
5/EXPANDER/NOlSE
GATE,
6/REVERB,
7/DELAY,
8/PlTCH
TRANSPOSER,
9/FLANGE/CHORUS
and 10/SPECIAL
EFFECTS. The black activator pads are what you use to
activate or program the X-15's many functions.
When the pedal is in the full up position, a minimum value
is present and as the pedal is gradually pushed down, the
value increases to its maximum value when all the way down.

Produktspezifikationen

Marke: ART
Kategorie: Regler
Modell: X-15

Brauchst du Hilfe?

Wenn Sie Hilfe mit ART X-15 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Regler ART

ART

ART X-15 Bedienungsanleitung

23 Juli 2024

Bedienungsanleitung Regler

Neueste Bedienungsanleitung fĂĽr -Kategorien-

PCE Instruments

PCE Instruments PCE-RE100P Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-RE21R Bedienungsanleitung

16 Oktober 2024
Thrustmaster

Thrustmaster T3PA Add-On Gaming Pedal Set Bedienungsanleitung

6 Oktober 2024
Hori

Hori Battle Pad Bedienungsanleitung

5 Oktober 2024
Saitek

Saitek PS2700 Bedienungsanleitung

4 Oktober 2024
Razer

Razer Wolverine V3 Pro Bedienungsanleitung

3 Oktober 2024
Axor

Axor Citterio E 36771001 Bedienungsanleitung

1 Oktober 2024
Hori

Hori Force Feedback Truck Control System Bedienungsanleitung

1 Oktober 2024
Balam Rush

Balam Rush Kontrol Glow G595 Bedienungsanleitung

30 September 2024
Razer

Razer Panthera Bedienungsanleitung

27 September 2024