Aqua One AquaLED 100 Bedienungsanleitung

Aqua One Aquarium AquaLED 100

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Aqua One AquaLED 100 (8 Seiten) in der Kategorie Aquarium. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Inspiring Excellence in Fish Care!
www.aquaone.com.au
Instruction version: 23/10/2014
45/68/100
AquaLED
2
GB
Important Safeguards
To guard against injury, basic safety precautions
should be observed, including the following:
1. Read and follow all safety instructions and important
notices in these instructions as well as on the product
itself.
2. This appliance is not intended for use by children
or in rm persons without supervision. Young children
should be supervised to ensure that they do not play
with the appliance.
3. To avoid possible electric shocks, special care
should be taken since water is employed in the use
of aquarium equipment. For each of the following
situations do not attempt repairs yourself. Return the
appliance to an authorised service facility for service
or discard the appliance.
a. If the appliance or any electrical component of the
appliance (non-immersible equipment only) falls into
the water or gets wet, do not reach for it. Unplug it and
then retrieve it.
b. If the appliance shows any sign of abnormal
water leakage, immediately unplug it from the power
source.
c. Carefully examine the appliance after installation.
It should not be plugged in if there is water on parts
which are not intended to be wet.
d. Do not operate the appliance if it has a damaged
cord or plug, or if it is malfunctioning, or dropped or
damaged in any manner.
4. A “drip loop” (see graphic) should be arranged for
each cable connecting an aquarium to a power supply.
The drip loop is the part of the cable below the level of
the power supply. It prevents water travelling down the
cable and coming into contact with the power supply.
If the plug or the socket does get wet, do not unplug
the appliance. Disconnect the fuse or circuit breaker
that supplies the power to the appliance, then unplug
and examine for presence of water in the socket.
5. Always unplug the appliance from the electrical
outlet when not in use, before putting on or taking off
parts, before any type of maintenance or cleaning.
6. Never yank the cable to pull it from the socket. Pull
the plug carefully to disconnect.
7. Do not use the appliance for reasons other than
the intended use. The use of attachments that are not
recommended or sold by the manufacturer may cause
the product to be unsafe. This is not recommended.
8. Do not install or store the appliance where it will be
exposed to weather or temperatures below freezing.
9. Make sure any component mounted on a tank is
securely installed before operating it.
10. Ensure input voltage is the same voltage as your
local power supply.
11. If an extension cable is used it should have the
proper rating. Care should be taken to arrange the
cord so that it will not be tripped or pulled.
12. A G.F.C.I (Ground fault circuit interrupter) &
surge protector is recommended for all electrical
appliances.
13. Ensure your hands are dry when turning the
power switch on/off and when inserting/removing the
power cable from the socket.
14. If you are in any doubt about the electrical
installation or safety of this product you must consult
a quali ed electrician.
For Guarantee Conditions, please refer to the
Guarantee form that is enclosed with this product.
All products are supplied with tted plugs. This plug
should not be tampered with in any way or removed.
Removal or tampering with the plug invalidates our
guarantee offered with this product.
For UK a 3 pin adaptor is supplied with the product
and this must be used.
3
GB
1. Wash your hands and arms. It is very important
to remove dirt, moisturizer and other impurities.
Do this whenever you work on the aquarium.
2. Remove the aquarium hood to allow access to
the lter.
3. Rinse the following under tap water. DO NOT
WASH IN SOAP OR DETERGENT.
All media and Glass Tank (Inside).
4. Place your background as required.
5. Install your Filter and Heater in your chosen
position. Follow the separate instructions supplied
with each.
6. Place the carbon cartridges into the lter with
the sponge facing upwards. The sponge will
already be placed in the top of the cartridge.
7. Consider where you are going to place the
aquarium. Keep it away from direct light or areas
with large temperature uctuations.
8. Place the aquarium on a at level surface
strong enough to support its weight.
9. Wash aquarium gravel. Place a portion of
gravel into a bucket, run water through & churn
it over with your hand until the water running out
of the bucket is clear. It is important to wash the
gravel thoroughly. Repeat this process several
times until all the gravel has been washed.
10. Place washed gravel over the base of the
aquarium.
11. At this stage place plastic plants, decorations
and heater (if required) in to the tank.
12. Fill the aquarium with tap water to the level
indicated.
13. Use Aqua One quality Water Conditioner (Sold
separately) to remove harmful chemicals chlorine
and heavier metals from tap water.
14. Close the lid of the aquarium.
15. Turn the light switches on, ensure the lights
work.
16. Allow the aquarium to stand for 5-7 days before
introducing a few hardy sh. Check the pH using
an Aqua One pH test kit (sold separately) before
adding sh.
17. Seek advice from your retailer for correct sh
numbers and species compatibility.
Setup Instructions
Before First Use/Preparation
Read and follow all the instructions, even if you feel
you are familiar with the product and nd a place
to keep the instructions handy for future reference.
Your attention is drawn particularly to the sections
concerning “IMPORTANT SAFEGUARDS and
the . Please ensure “GUARANTEE CONDITIONS”
you retain your original purchase receipt in the
event that guarantee service is required.
Carefully unpack the aquarium making sure you
keep all the packing material until all the parts of
the product have been found and the product has
been assembled.
This product is shipped to you in a factory sealed
carton. Should the product malfunction in any way
or if the unit is damaged and requires replacement,
contact the retailer where the product was
purchased for inspection.


Produktspezifikationen

Marke: Aqua One
Kategorie: Aquarium
Modell: AquaLED 100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Aqua One AquaLED 100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten