APC SRVSMB001 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC SRVSMB001 (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
Important Safety Information
Read the instructions carefully and look at the equipment to become familiar
with the device before trying to
install, operate, service or maintain it. The
following special messages may appear throughout this document or on
the
equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of this symbol to either Danger or Warning producta ” “
safety label
indicates that an electrical hazard exists which will
result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential
personal injury
hazards. Obey all safety messages that follow
this symbol to avoid possible injury or
death.
DANGER
DANGER will result inindicates a hazardous situation which, if not avoided, death or serious injury.
WARNING
WARNING
indicates
a
ha ardouz s
situation
which,
if
not
avoid ,ed
coul r ultd es
in
death
or
serious
injury.
CAUTION
CAUTION
i icatesnd
a
hazard sou
sit tionua
which,
if
not
avoi ,ded
c l r ultou d es
in
mi rno
or
m teodera
injury.
N OTICE
NOTICE
is
used
to
address
practices
not
related
to
physical
injury.
User
Manual
Easy UPS
Modbus Card SRVSMB001
2
Easy UPS Modbus Card
SRVSMB001
Product Description
The Modbus card provides UPS systems with the functionality of communication with PCs through MODBUS protocol:
Implements MODBUS RTU protocol
Provides MODBUS functions including read Holding Registers and write Registers.
Provides RS485 interface
Provides surge protection
Supported Devices
The Modbus Card can be installed in any compatible device that is equipped with Intelligent Card Slot, including:
Easy UPS On-Line: SRVS series UPS
Package Contents
The packaging is recyclable; save it for reuse or dispose of it properly.
(1)
Modbus Card
(1)
User manual
Disclaimer
Thank you for purchasing Modbus Card. This manual contains instructions that should be followed during the
installation, operati and storage of the card. Keep this manual for future reference. on
Special Precautions
If the card must be stored prior to installation; store in a dry place. it
The storage temperature range is from -1C to +7C.
Recycle
The shipping materials are recyclable. Save them for later use, or dispose of them properly.
3
Easy UPS Modbus Card
SRVSMB001
Product Overview
RS- port 485
Communication setting
Golden finger
Resistance switch
Address switch
Specifications
Physical
Dimensions with package
Width x Height x Depth
168 mm (6.61in) x 42 mm (1.65in) x 132
mm (5.2in)
Dimensions without package
Width x Height x Depth
52.4 mm (2.06in) mm (1. in) x x 26 02 80 mm
(3.15in)
Weight with package
0.12 kg (0.26 lb)
Weight without package
0.03 (0. lb)kg 07
Temperature
Operating
0 to 40°C (32 to 104 °F)
Storage
-10 to 70°C (13.4 to 158°F)
Humidity
Operating
0 to 95% relative humidity, non-condensing
Supported Protocol
Modbus RTU
Power
Consumption
Operating
0.5 W (max.)
Standby
0.3 W (max.)
Supported Power
12 V (10 V 14 V)
Communication
Interface
Console Communication
RJ45 port
UPS
Golden finger
Firmware Upgrading
RS485
Installation & Operation
Follow the steps below when installing and using this modbus card:
1. Configure Modbus ID (Refer to the for details.)next section “Configuration
2. Configure communication format (Refer to the for details.)next section “Configuration
3. Insert the modbus card into the intelligent card slot.


Produktspezifikationen

Marke: APC
Kategorie: Nicht kategorisiert
Modell: SRVSMB001

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC SRVSMB001 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert APC

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-