APC C2C Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für APC C2C (20 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
User Manual
C Type Wall Mount Power Filter
C2C
© 2009 APC by Schneider Electric. APC, the APC logo, and
TRADEMARK NAMES are owned by Schneider Electric
Industries S.A.S., American Power Conversion Corporation,
or their affiliated companies. All other trademarks are property
of their respective owners.
i
Safety Information
1.
Read this manual
- Read all of the safety and operating instructions before
installing and operating this device.
2.
Keep this manual
- Retain this manual, and all of the safety information that
came with this device.
3.
Warnings
- Comply with all warnings presented in this manual, as well as any
found on the device.
4.
Follow Instructions
- Follow all operating and use instruction.
5.
Cleaning
- Unplug this device from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a soft damp cloth for cleaning.
Note
: A product that is meant for uninterrupted service and for some specific
reason, such as the possibility of the loss of an authorization code for a cable TV
converter, is not intended to be unplugged by the user for cleaning or any other
purpose, may exclude the reference to unplugging this device.
6.
Water and Moisture
- Do not use this product near any source of water, or in an
environment where the relative humidity may exceed 95% (non-condensing).
7.
Placement
- Do not install this device on any unsteady surface. Do not install
this device on any heat source.
8.
Power
- Ensure this device is connected to a properly grounded AC power
source. Further ensure the device is plugged into a source providing the required
120 Vac. Do not use a plug adapter which defeats the ground pin of the AC plug.
9.
Polarization
- This device has a polarized AC line plug having one blade wider
than the other. This plug will only fit into the wall outlet in one orientation. This is
a safety feature. Do not remove the round grounding pin, or use an adapter that
defeats this safety feature.
10.
Power Cord
- Ensure power cords are routed in a manner that will preclude
them being pinched, frayed, or stepped on. After connecting other devices to this
device, do not push the rear of the device up against any surface (wall or shelving
unit), as this may create an undesired bend in the power cords which may break
the wire strands of the cord.
11.
Antenna Grounding
- Although this device provides protection against
electrical surges, when connecting an outside antenna or cable system to devices
connected to this device, ensure the antenna or cable system is grounded so as to
provide additional protection against voltage surges and static charges in
accordance with Section 810 of the National Electric Code, ANSI/NFPA No.70
(see illustration - next page).
12. Lightning - This device employs Metal Oxide Varisters (MOVs), and other
circuitry to protect against lightning and other sources of voltage surges and
sags. It is not necessary to turn this device or the devices connected to this
device, off during a lighting storm.
13.
Power Lines
- Do not locate outside antenna systems near overhead power
lines, or other electric light or power circuits, or where it may fall or otherwise
come in contact with these power sources. Do not allow the ladder being used, or
the antenna itself to come into contact with these power sources, and such contact
may be fatal.


Produktspezifikationen

Marke: APC
Kategorie: Nicht kategorisiert
Modell: C2C

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC C2C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert APC

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-