APC ACAC10053 Bedienungsanleitung

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr APC ACAC10053 (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Installation Sheet 990-6484-001 –Release Date: 03/2021
ACAC10053—Low Temperature Accessory Kit for
ACRH301/ACHU300 Series
Inventory
0000591919_A
Item Description Quantity Item Description Quantity
Electric panel heater 1 M4x8 TORX® screw* 4
VFD heater 1
*Two screws are shipped with each heater.
Schneider Electric
35 rue Joseph Monier
92500 Rueil Malmaison -
France
+ 33 (0) 1 41 29 70 00
www.schneider-electric.com
As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© 2021 – 2021 . All rightsSchneider Electric
reserved.
ACAC10053—Low Temperature Accessory Kit for ACRH301/
ACHU300 Series Electrical Panel Heater
Electrical Panel Heater
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe
electrical work practices.
• This equipment must be installed and serviced by qualified and trained
personnel only.
• Turn off all power supplying this equipment before working on or inside the
equipment. For the dry cooler only, it is necessary to remove the power
supply plug before opening the electrical panel.
• Replace all devices, doors, and covers before turning on power to this
equipment.
Failure to follow these instructions will result in death or serious injury.
1. Remove power from the unit.
2. Open the electrical panel of the unit.
See the “Panel Removal” section of the unit forInstallation Manual
instructions on accessing the electrical panel.
3. Install the electrical panel heater in the EBOX with two M4x8 TORX ®screws.
NOTE: Unit with an ATS is shown.
0000592473_A
2 990-6484-001
VFD Heater ACAC10053—Low Temperature Accessory Kit for ACRH301/
ACHU300 Series
4. Connect the cable to the heater.
NOTE: The cable is located in the wiring duct.
0000592472_A
VFD Heater
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe
electrical work practices.
• This equipment must be installed and serviced by qualified and trained
personnel only.
• Turn off all power supplying this equipment before working on or inside the
equipment. For the dry cooler only, it is necessary to remove the power
supply plug before opening the electrical panel.
• Replace all devices, doors, and covers before turning on power to this
equipment.
Failure to follow these instructions will result in death or serious injury.
1. Remove power from the unit.
2. Open the service panel of the unit.
See the “Panel Removal” section of the unit forInstallation Manual
instructions on removing the service panel.
990-6484-001 3

Produktspezifikationen

Marke: APC
Kategorie: niet gecategoriseerd
Modell: ACAC10053

Brauchst du Hilfe?

Wenn Sie Hilfe mit APC ACAC10053 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd APC

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĂĽr -Kategorien-