Anton/Bauer CINE VCLX Bedienungsanleitung

Anton/Bauer Batterij-oplader CINE VCLX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Anton/Bauer CINE VCLX (6 Seiten) in der Kategorie Batterij-oplader. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
One World. One Smart Choice.™
Owner’s Manual
CINE VCLX CHARGER
7595-0328 Rev D
®
Approved Copy
1 STANDARD FEATURES
SAFEGUARDS
GROUNDING/EARTHING
1-2 OPERATION
2 LED INDICATIONS
FCC NOTICE
SPECIFICATIONS
3 LIMITED WARRANTY
TABLE OF CONTENTS
Approved Copy
1
STANDARD FEATURES
• Full InterActive technology including six simultaneous charge
termination systems, Balance and Rejuvenation modes, and
LifeSaver Maintenance mode.
• Wide range mains input compatibility (100-240 VAC 50-60Hz) auto-
matically adapts to any mains source worldwide.
• Red and Green LED’s for charge status.
The unit was packaged at the factory to arrive intact at its
destination. If there is any damage to the packaging or the unit
when received, please notify the carrier immediately.
SAFEGUARDS
POWER SOURCES: This unit was designed to operate at mains
voltages from 100 to 240 Volts AC, 50-60Hz.
IMPORTANT: When powering charger using a generator, the gen-
eratormustproduceasinewaveoramodiedsine
wave output, otherwise the charger may be damaged.
RISK OF ELECTRICAL SHOCK: Referservicingtoqualiedservice
personnel.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
GROUNDING/EARTHING
IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED.
To ensure safe operation, the three pin plug supplied must be inserted
only into a standard three-pin power point that is effectively grounded
through the normal household wiring. Extension cords used with the
equipment must be three-conductor and be correctly wired to provide
connection to earth ground. Improperly wired extension cords are a
dangerous electrical hazard.
The fact that the equipment operates satisfactorily does not imply
that the power point is properly grounded and that the installation is
completely safe. If any doubt exists about the correct grounding of the
powerpoint,consultaqualiedelectrician.
IMPORTANT: The wires in this main lead are colored in accordance
with the following code:
Green and Yellow Earth
Blue Neutral
Brown Live
OPERATION
CHARGING
Simply plug the CINE VCLX Charger into the CINE VCLX (CA) battery
via the CA-GBC cable. As with all Anton/Bauer chargers, charging
is automatic. Charge time is approximately 7 hours. The CINE VCLX
(CA) battery is ready for use once ALL four charge status GREEN
LEDs are lit on the charger.
APPLICATIONS
This charger is only designed to charge the CINE VCLX (CA) battery.
This charger incorporates the exclusive Anton/Bauer InterActive
communication between battery and charger, which allows the charger
to identify the cell packs and determine the precise charge routine for
that cell pack under the prevailing conditions.
This information is communicated to the charger by the battery and
is incorporated, through specialized programming and algorithms to
optimize the charging of this DIGITAL battery.
THREE STAGE CHARGING METHODOLOGY
In general, the CINE VCLX Charger will deliver a three stage charge
routine to each battery.
1. Stage One will deliver a charge matched to the capabilities of the
battery. During this stage, six separate cutoff methods are in operation,
simultaneously, ensuring the fastest, safest charge for that battery.
TCO – Temperature cutoff that stops the Stage one charge
precisely when a temperature indicative of full charge is reached.
Dt/dT – a microprocessor based algorithm that measures a rise
in temperature over a specic time, very accurately indicating
full charge. This method is also the recommended method for
charging Ni-Mh technology;
-∆V- A method to determine the end of a stage one charging by
identifying a characteristic “reverse slope” of a Ni-Cd cell. Since
this characteristic can be disguised by the age, temperature and
the number of the cells in a battery, it can never be employed
alone;
CINE VCLX (CA)
battery
CINE VCLX
charger
CA-GBC
cable
Approved Copy

Produktspezifikationen

Marke: Anton/Bauer
Kategorie: Batterij-oplader
Modell: CINE VCLX

Brauchst du Hilfe?

Wenn Sie Hilfe mit Anton/Bauer CINE VCLX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Batterij-oplader Anton/Bauer

Anton/Bauer

Anton/Bauer CINE VCLX Bedienungsanleitung

22 August 2024
Anton/Bauer

Anton/Bauer POWERTAP EXTENSION Bedienungsanleitung

22 August 2024
Anton/Bauer

Anton/Bauer TANDEM 70 Bedienungsanleitung

22 August 2024

Bedienungsanleitung Batterij-oplader

Neueste Bedienungsanleitung für -Kategorien-

Makita

Makita DC10SB Bedienungsanleitung

15 September 2024
Hitachi

Hitachi UC 36YRL Bedienungsanleitung

14 September 2024
Trotec

Trotec PBCS 2A Bedienungsanleitung

14 September 2024
Projecta

Projecta BLT700 Bedienungsanleitung

13 September 2024
Tryton

Tryton TJ1LD Bedienungsanleitung

12 September 2024
BAAS

BAAS MC922 Bedienungsanleitung

9 September 2024
JVC

JVC KS-GC10Q Bedienungsanleitung

9 September 2024
Makita

Makita DC10WD Bedienungsanleitung

8 September 2024
Makita

Makita DC1414 Bedienungsanleitung

7 September 2024
Makita

Makita DC24SC Bedienungsanleitung

7 September 2024