Anthro Fit Utility Unit Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Anthro Fit Utility Unit (2 Seiten) in der Kategorie BĂŒro. Dieser Bedienungsanleitung war fĂŒr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
R
01âWork Surface
.................................
Qty. 1
.......................
(see below)
24" Wide Work Surface
(FY2429zz/xx3)
...........
100-6431-00
30" Wide Work Surface
(FY3029zz/xx3)
...........
100-6440-00
36" Wide Work Surface
(FY3629zz/xx3)
...........
100-6535-00
02â Fit Small Support Y
....................
Qty. 1
...................
225-2015-00
03â 22.875" Vertical Legs
.................
Qty. 4
...................
125-5213-00
04â 21" Base Tubes
..............................
Qty. 2
..................
125-5275-00
05â Cross Tubes
...............................
Qty. 2
.......................
(see below)
24" Wide Base Tube
(FY2429zz/xx3)
...................
125-5218-00
30" Wide Base Tube
(FY3029zz/xx3)
...................
125-5219-00
36" Wide Base Tube
(FY3629zz/xx3)
...................
125-5220-00
06â Insert Screws
.................................
Qty. 4
...................
325-5052-00
07â 2" Large End Caps
.......................
Qty. 4
...................
175-5157-00
08â 3" Locking Casters
......................
Qty. 2
...................
150-5053-00
09â Caster Inserts
...............................
Qty. 4
...................
525-5032-00
10â
5
/
16
"-18 Fit
Bolts
............................
Qty. 8
...................
325-5194-00
11â Fit
Tube Washers
.........................
Qty. 8
..
225-2050-00 or 225-3522-00
Component part list for part #âs
FY2429zz/xx3, FY3029zz/xx3, FY3629zz/xx3
12â 3" Non-Locking Casters
...........
Qty. 2
...................
150-5052-00
13â
3
/
4
" Wood Screws
.........................
Qty. 8
...................
325-5106-00
14â Fit Small Support X
....................
Qty. 1
...................
225-2014-00
15â Support Screws
............................
Qty. 8
...................
325-5010-00
16â Back Trough
....................................
Qty. 1
.......................
(see below)
24" Wide Back Trough
(FY2429zz/xx3)
..............
225-2289-00
30" Wide Back Trough
(FY3029zz/xx3)
..............
225-2290-00
36" Wide Back Trough
(FY3629zz/xx3)
..............
225-2291-00
17â 1.5" Small Caps
.............................
Qty. 4
...................
175-5156-00
18â
1
/
4
"-20 Button Head Screws
....
Qty. 4
...................
325-5003-00
All Screw quantities listed here are the minimum needed
for your Utility Unit assembly. There may be a few extra
Screws included, which are not counted in the Parts List.
Anthro
Corporation Technology Furniture
Âź
10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com
SAVE THESE INSTRUCTIONS!
Rev. D January 2006
Step 7
Attaching the Base Assembly to the Legs
Align the Base Assembly on the Legs as shown. Secure
the Base Assembly to the Legs by inserting a Bolt through
Tube Washer and attach loosely.
Repeat for the remaining three Bolts, then tighten all the
fasteners (see steps 2 and 4).
Step 8
The Final Step
Carefully rotate your Utility Unit onto its Casters.
Insert the four 1.5" End Caps into the Legs.
Congratulations!
Your assembly is complete.
1-800-325-3841
Hello!
Thank you for choosing Anthro.
Before beginning assembly of your
Utility Unit, please take a moment to
review the parts listed below to verify
that your shipment is complete.
Please review the assembly
instructions of all Anthro products
you purchased and are planning to
include in this installation prior to
beginning this assembly.
To make the assembly of your Utility
Unit even easier, p1-we have included
of the required tools. The handy Hex
Driver Bit can be used in your electric
drill in place of the Hex Driver.
Hex Driver
5
/
32
"
...........
375-5000-00
Hex Driver Bit
5
/
32
"
.....
375-5003-00
8 oz. Rubber Mallet
.....
375-5022-00
Questions?
1-800-325-3841
(
5
/
6
"-18 X 3.5â) Fit Bolt
325-5194-00
Fit
Tube Washer
225-2050-00 or 225-3522-00
06
05
01
2
4
16
0
1.5" Small End Cap
Fit Bolt
Fit Tube
Washer
Cross Tube
24"/30"/36" wide Utility Unit
Assembly Instructions
Detailed views of all Hardware are provided
with each Assembly Step.
Please return the enclosed Registration Card to receive our product updates, new catalogs, and
sale ïŹ yers; youâll be entered to win our monthly drawing of $300.00 of Anthro products!
Thank you for choosing Anthro!
Anthro
Corporation Technology Furniture
Âź
10450 SW Manhasset Drive Tualatin, Oregon 97062
Step 1
Attaching Shelf Supports to the Shelf
Place your Work Surface onto the ïŹ oor with the
predrilled holes facing upward.
Position the Small Supports onto the Work Surface and
align two of the holes on each Small Support with the
predrilled holes on the Work Surface.
Secure each Small Support to the Work Surface
using two Wood Screws per Support.
anthro.com
Step 3
Determine the Shelf Height
Determine the best height for your Shelf. These instructions
will place your Shelf 29" from the Floor using the standard
3" Casters.
For a ïŹ nal Shelf height that is lower than 29", adjust one
hole down for each inch of variance desired.
NOTE
: Your Shelf location may be changed after your Utility Unit
has been completely assembled by referring to Step 4.
Step 4
Attaching the Legs to the Work Surface
The Utility Unit Legs have a coped (curved) end and a
ïŹ at end. The ïŹ at end attaches to the Work Surface.
Attach a Leg to the rear of the Shelf using two Support
Screws. Insert the screws through the holes in the Shelf
Support and into the ïŹ rst and third holes on the leg; leave
the screws a little loose. Repeat for the other three legs.
Step 5
Assembling the Base Tube
Install two caster Inserts into each Base Tube and secure
with one Insert Screw per Caster Insert.
Insert one Locking Caster and one Non-locking Caster
into the Inserts on each Base Tube. The Non-locking
Caster should be near the two side holes.
Insert 2" End Caps into the ends of each Base Tube.
Questions? 1-800-325-3841
Support Screw
325-5010-00
Step 2
Attaching the Back Trough to the Shelf Supports
Place the Back Trough onto the Work Surface, between
the installed Small Supports
(from Step 1)
.
Align the two threaded holes on each end of the Back
Trough with those on both Shelf Supports. Carefully thread
one Button Head Screw through the Shelf Support and into
the Back Trough, but donât tighten all the way.
Repeat for the remaining three Button Head Screws, and
leave them all a slightly loose.
Align the holes in the bottom ïŹ ange of the Back Trough with
the pre-drilled holes on the Work Surface. Attach the Back
Trough to the Work Surface using two Wood Screws.
3
/
4
" Wood Screw
325-5106-00
3
/
4
" Wood Screw
325-5106-00
(
/
4
"-20 X .50") Button Head Screw
325-5003-00
29"
Insert Screw
(small pink patch on end)
325-5052-00
Small Support X
Small Support Y
Small Support X
FIRST
: Install the Button Head Screws
TT
SECOND:
Install the Wood Screws
Back Trough
Back Trough ïŹ ange
NOTE
: Make certain to install
the Back Trough in front of the
Small Supports.
Threaded holes
Locking
Caster
Caster Inserts placed
into the large holes
Leave these two side holes open
Non-Locking
Caster
Hole 1=29"
Final Work Surface Height
Small Support X
Hole 1
Top
(non-coped)
end
Bottom
(coped)
end
Hole 3
REAR LEG
FRONT
LEG
24"/30"/36" wide Utility Unit
Assembly Instructions
Wood Screw
Support Screw
End Cap
Step 6
Attaching the Cross Tubes to the Base Tubes
Attach a Cross Tube to a Base Tube by inserting a
Fit Bolt
through a Tube Washer, then insert the Bolt through
the
Base Tube and carefully thread into the Cross Tube.
Repeat this procedure for other Cross Tube. Then tighten
all
Fit
Bolts.
Fit Tube Washer
225-2050-00 or 225-3522-00
Cross Tube
Fit Tube
Washer
(
5
/
6
"-18 X 3.5") Fit Bolt
325-5194-00
Fit Bolt
Base Assembly
Locking
Caster
Non-Locking
Caster
Produktspezifikationen
| Marke: | Anthro |
| Kategorie: | BĂŒro |
| Modell: | Fit Utility Unit |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Anthro Fit Utility Unit benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung BĂŒro Anthro
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
Bedienungsanleitung BĂŒro
- BĂŒro Corsair
- BĂŒro Cougar
- BĂŒro Manhattan
- BĂŒro Sandberg
- BĂŒro Sharkoon
- BĂŒro IKEA
- BĂŒro Bush
- BĂŒro Leen Bakker
- BĂŒro Livarno
- BĂŒro Tvilum
- BĂŒro United Office
- BĂŒro Habitat
- BĂŒro LC-Power
- BĂŒro JYSK
- BĂŒro Flexa
- BĂŒro Parisot
- BĂŒro Genesis
- BĂŒro Techly
- BĂŒro Cooler Master
- BĂŒro Thermaltake
- BĂŒro Fellowes
- BĂŒro Kogan
- BĂŒro Victor
- BĂŒro NewStar
- BĂŒro Digitus
- BĂŒro Glorious
- BĂŒro Aeris
- BĂŒro Butler
- BĂŒro Durable
- BĂŒro X Rocker
- BĂŒro Bretford
- BĂŒro Hooker
- BĂŒro HJH Office
- BĂŒro AeroCool
- BĂŒro BDI
- BĂŒro ThunderX3
- BĂŒro Piranha
- BĂŒro Zomo
- BĂŒro Lazy Maisons
- BĂŒro Zaor
- BĂŒro Bell'O
- BĂŒro Seville Classics
- BĂŒro Four Hands
- BĂŒro Ultradesk
- BĂŒro HON
- BĂŒro Worktrainer
- BĂŒro Yaasa
- BĂŒro CoolerMaster
- BĂŒro Overdrive
- BĂŒro Xtech
- BĂŒro Ergolux
Neueste Bedienungsanleitung fĂŒr -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
22 September 2024
7 September 2024