Anthro 030LG Bedienungsanleitung

Anthro Nicht kategorisiert 030LG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Anthro 030LG (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

TECHNOLOGY FURNITURE®

300-5386-00

*300-5386-00*

Anthro PrinterCart

Assembly Instructions

01– Vertical Legs .............................. Qty. 4 ............................. (see below)

15.10" Vertical Legs (035xx, 085xx) ................................... 125-5050-xx

23.875" Vertical Legs (030xx, 080xx) ................................ 125-5020-xx

02– Insert Screws ............................ Qty. 4 .........................325-5052-00

03– 1.75" Large End Caps ............ Qty. 2......................... 175-5021-xx

04– Caster Inserts ........................... Qty. 4 ......................525-1000-00*

05– 2 3/8" Locking Casters ................ Qty. 2 ......................150-5003-00*

06– Base Tube Screws ..................... Qty. 4 ......................... 325-5000-00

07– 2 3/8" Non-Locking Casters ........ Qty. 2 ...................... 150-5002-00*

08– PrinterCart Base Tube ............. Qty. 1 ............................. (see below)

24" Wide Base Tube ................................................. 125-5031-xx

36" Wide Base Tube ................................................. 125-5058-xx

09– Clamp Screws........................... Qty. 8 .........................325-5086-03

10– Shelf Supports .......................... Qty. 8 ......................... 175-5060-xx

Component list for part#’s

030xx, 035xx, 080xx, 085xx.

11– Shelf Clamps ............................. Qty. 8 ......................... 175-5059-xx

12– PrinterCart Shelf ....................... Qty. 2 ............................. (see below)

24” Wide PrinterCart Shelf ..................................... 100-6017-xx

36” Wide PrinterCart Shelf ..................................... 100-6107-xx

13– 1.5" Small End Caps ............... Qty. 4 ......................... 175-5020-xx

14– Support Screws ........................ Qty. 8 .........................325-5010-00

All Fastener quantities listed here are the minimum needed

for your Cart assembly. There may be a few extra

Fasteners included, which are not counted in the Parts List.

To make the assembly of your Anthro PrinterCart even easier, we

have included all of the required tools (not shown above). The handy

Hex Driver Bit can be used in your electric drill in place of the Hex Driver.

Hex Driver 5/32" ........................ Qty. 1 ....................... 375-5000-00

Hex Driver Bit 5/32" .................. Qty. 1 ....................... 375-5003-00

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062

SAVE THESE INSTRUCTIONS! anthro.com

Step 7

Carefully, rotate the Shelf Assembly (from Step 5),

upside down as shown.

Place the Base Tube Assembly (from Step 6) onto the

Vertical Legs of the Shelf Assembly.

Attach the Base Tube to each Leg using a total of four

Base Tube Screws.

Tighten all Support, Caster, and Base Tube Screws.

Step 8

Rotate your PrinterCart over onto the Casters.

Pop the 1.5" Small End Caps into the Vertical Legs and

the 1.75" Large End Caps into the Base Tube.

Congratulations! Your assembly is complete.

Please return the enclosed Registration Card to receive

our product updates, new catalogs, and sale flyers.

Thank you for choosing Anthro!

1.5" Small End Cap

1.75" Large End Cap

March 2006

Hello! Thank you for choosing Anthro.

Before beginning assembly of your Anthro

PrinterCart, please take a moment to

review the parts listed below to verify

that your shipment is complete.

✍Does your Cart have 4" Casters?*

(Such as a 030xx4. Your Caster Part

Numbers are given here.)

✍Does your Cart have Glides?*

(Such as a 030xxGL. Your Glide and Glide

Insert Part Numbers are given here.)

4" Locking Caster

150-5011-00

4" Non-Locking Caster

150-5010-00

Glide Insert

525-1004-00

Glide

325-5042-00

04 06

Base Tube Screw

325-5000-00

Questions? 1-800-325-3841

Anthro PrinterCart

Assembly Instructions

Anthro Corporation Technology Furniture® 10450 SW Manhasset Drive Tualatin, Oregon 97062

Step 1

Before proceeding, please review the Assembly Instructions of all Anthro Products you purchased and are planning

to include in this installation.

Decide on the shelf configuration that works best for you. Generally, customers place the large shelf at the top

of the legs and the small shelf at the bottom of the legs, and that’s how these instructions are organized. This

configuration leaves 18" clearance between the shelves on the 28" high cart and 10" clearance between the shelves

on the 20" high cart.

Shelves can be installed at any height (in 1" increments), so find the best configuration for you. If you need

help configuring your cart, just give us a call!

Step 2

Attach four Shelf Supports to each Shelf. Begin by first

installing a Shelf Clamp into the Shelf notch. Be sure

the pointed barbs face towards the outer Shelf edge.

Next, slide a Shelf Support into the recesses of the

Shelf Clamp and Shelf. Push in as far as possible.

Finally, secure with a Clamp Screw.

anthro.com

Step 3

Loosely attach a Shelf to the bottom hole (coped end)

of two Vertical Legs using two Support Screws.

NOTE: This will place your lower Shelf 20" from the floor

using the standard 2 3/8" Casters.

Step 4

Loosely attach the remaining Shelf to Hole 2 from the

top (non-coped end) of the Vertical Leg Assembly (from

Step 3) using two Support Screws.

NOTE: Handle the Shelf Assembly carefully until the Cart

is fully assembled.

Step 5

Loosely attach the 3rd and 4th Vertical Legs to the

Shelf Assembly (from Step 4) using one Support

Screw per Shelf Support.

TIP: Use the holes in the Vertical Legs as a ruler to

ensure that your Support Screws are installed into the

correct locations.

Questions? 1-800-325-3841

First

Finally

Support Screw

325-5010-00

Support Screw

325-5010-00

Clamp Screw

325-5086-03

Barbs

Support Screw

325-5010-00

Bottom (coped) end

Hole 12=20"

(using 2 3/8" Casters)

Top (non-coped) end

Hole 2

Bottom (coped) end

Insert one Support Screw

through each Shelf Support

Step 6

Install all four Caster Inserts into the Base Tube and

secure with one Caster Screw per Insert.

Push the Casters, (locking ones in front) into the

Caster Inserts.

Caster Screw

(small pink patch on end)

325-5052-00

GLIDES ONLY

Thread each Glide

into the Glide Inserts

Locking

Casters

Produktspezifikationen

Marke:	Anthro
Kategorie:	Nicht kategorisiert
Modell:	030LG
Produktfarbe:	Grau
Material:	MDF, Metal
Ursprungsland:	Vereinigte Staaten
Farbe:	Ja
Größe (Imperial):	24 "
Abmessungen (B x T x H) (in Zoll):	25.25 x 22.5 x 28 "