Antec Sonata II Bedienungsanleitung
Antec
Computergehäuse
Sonata II
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Antec Sonata II (10 Seiten) in der Kategorie Computergehäuse. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/10
2
At Antec, we continually refine and improve our products to ensure the highest quality. So it's
possible that your new case may differ slightly from the descriptions in this manual. This isn't
a problem; it's simply an improvement. As of the date of publication, all features, descriptions,
and illustrations in this manual are correct.
SONATA II USER'S MANUAL
This case is designed to meet Intel's Thermally Advantaged Chassis (TAC) design guide
requirements. It comes with a unique Antec Chassis Air Guide (ACAG) to help cool high
performance CPUs.
It comes with an Antec SmartPower 2.0 series power supply with the newest ATX12V version 2.0
specifications. This includes dual 12V output circuitry that delivers safer and more reliable output
to your system's components, as well as higher energy efficiency, which reduces power consum
ption by up to 25% saving you money on your electricity bill. In addition we've included a variety
of industrial-grade protective circuitry: OCP (over current protection), OPP (over power
protection), OVP (over voltage protection), UVP (under voltage protection), and SCP (short cir-
cuit protection).
THE PUSH-PULL FAN QUIET POWER SUPPLY
SmartPower 2.0 features an innovative design to help decrease noise during normal use, but which
still allows for superior cooling capabilities as load increases. To this end SmartPower 2.0 features
both an internal intake fan as well as a unique external exhaust fan. The internal intake fan
operates when the power supply is turned on. It rotates slowly to blow out the hot air from the
power supply, and is thermally controlled, speeding up as heat increases. The external exhaust fan
remains off to make sure your computer maintains a quiet computing environment until the power
supply senses the required temperature to turn on the external exhaust fan.
This power supply is backwards compatible with previous ATX foam factor power supplies. To
make sure you connect your power supply properly, please refer to the user manuals supplied with
your motherboard and peripherals before connecting any of them to the power supply.
The power supply comes with a main power switch. Make sure you turn the switch to the ON
( I ) position before you boot up your computer for the first time.
Applies only to models designed for sale in the European Union:
SmartPower 2.0 series power supply models designed for the EU includes Power Factor
Correction (PFC) circuitry in accordance with European standard regulation code EN61000-3-2.
By altering the input current wave shape, PFC improves the power factor of the power supply.
This results in increased energy efficiency, reduced heat loss, prolonged life for power distribution
and consumption equipment, and improved output voltage stability.
SETTING UP
1. Place the case upright on a flat, stable surface. The power supply fan should be at the back,
facing you.
2. Note (not applicable to models designed for the European Union): Before installation, check
Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures. For
more comprehensive instructions on installing your motherboard and peripherals,
please refer to the user's manuals which come with your components and drives.
3
the red voltage switch setting on the power supply. It should match your local voltage (115V
for North America, Japan, etc. and 230V for Europe and many other countries). If it doesn't
match, please change the setting. If you don't, you could damage your equipment and void
your warranty.
3. Remove the thumbscrews from the panel with the latch. Unlock the side panel, swing the panel
out, and remove it. Set the panel safely aside. Please don't try to use your fingernails toNote:
pry or lift the panel.
4. Inside the case you should see the power supply, the 120mm TriCool fan preinstalled, the
Antec Chassis Air Guide (ACAG), some wiring with marked connectors (USB, PWR etc.), and
installed I/O panel, a power cord. You will also find a bag of hardware (screws, brass
standoffs, plastic stands, etc.)
5. Lay the case down with the open side facing up. You need to remove the Antec Chassis Air
Guide (ACAG) before your motherboard installation. To remove the ACAG:
6. Remove the two screws and loosen the thumbscrew found at the bottom of the ACAG. (picture 1)
7. Loosen the thumbscrew near the 120mm fan grill, that is holding the ACAG to the chassis.
(picture 2).
8. Loosen the thumbscrew at the top of the ACAG under the power supply. (picture 3)
9. With both your hands holding the ACAG, slowly slide the ACAG toward the front of the case
until it stops.
10. Raise the top of the ACAG and slide the ACAG out from its position. You will see a Tube
remaining in the chassis. You can leave the tube in the case.
11. If you want to remove the tube, slide the tube towards the top of the case. Pull the tube away
and put the tube aside.
two screws thumbscrews
Produktspezifikationen
| Marke: | Antec |
| Kategorie: | Computergehäuse |
| Modell: | Sonata II |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Antec Sonata II benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Computergehäuse Antec
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Computergehäuse
- Computergehäuse 3M
- Computergehäuse Asus
- Computergehäuse Corsair
- Computergehäuse Cougar
- Computergehäuse Gigabyte
- Computergehäuse Sharkoon
- Computergehäuse Zalman
- Computergehäuse Icy Box
- Computergehäuse Dell
- Computergehäuse Enermax
- Computergehäuse Razer
- Computergehäuse Supermicro
- Computergehäuse Genesis
- Computergehäuse Techly
- Computergehäuse Cooler Master
- Computergehäuse HYTE
- Computergehäuse NZXT
- Computergehäuse SilverStone
- Computergehäuse Thermaltake
- Computergehäuse Monoprice
- Computergehäuse Be Quiet!
- Computergehäuse Phanteks
- Computergehäuse Akasa
- Computergehäuse Intel
- Computergehäuse StarTech.com
- Computergehäuse ModeCom
- Computergehäuse KRUX
- Computergehäuse XPG
- Computergehäuse Advantech
- Computergehäuse Gamdias
- Computergehäuse AeroCool
- Computergehäuse Akyga
- Computergehäuse Xigmatek
- Computergehäuse Rosewill
- Computergehäuse Fractal Design
- Computergehäuse Savio
- Computergehäuse Chenbro Micom
- Computergehäuse SilentiumPC
- Computergehäuse IStarUSA
- Computergehäuse Evnbetter
- Computergehäuse 3R System
- Computergehäuse Logic
- Computergehäuse Chieftec
- Computergehäuse CoolerMaster
Neueste Bedienungsanleitung fĂĽr -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
28 September 2024
22 September 2024
22 September 2024
19 September 2024
18 September 2024
12 September 2024