Antec Minuet 350 Bedienungsanleitung

Antec Computergehäuse Minuet 350

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Antec Minuet 350 (7 Seiten) in der Kategorie Computergehäuse. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

Minuet 350

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

পᡅ䂀ᯢ᳌

At Antec, we continually refine and improve our products to ensure the highest

quality. As such, your new product may differ slightly from the description in this

manual. This isn’t a problem; it’s simply an improvement. As of the date of publi-

cation, all features, descriptions, and illustrations in this manual are correct.

Disclaimer

This manual is intended only as a guide for Antec’s Computer Enclosures. For more

comprehensive instructions on installing the motherboard and peripherals, please

refer to the user manuals that come with those components and drives.

MINUET 350 USER’S MANUAL

The Minuet 350 is a small case that’s big on features. It can be configured in

a desktop or vertical orientation. It comes with an 80PLUS® certified 350 Watt

power supply (PSU). The PSU generates less heat because it is designed for high

efficiency. This keeps the power supply cool and prolongs its working life.

The PSU includes Universal Input with Active Power Factor Correction (PFC).

Universal Input allows you to connect your PSU to any AC power outlet between

100~240V without setting a voltage switch. Active PFC reduces electrical waste

by improving the power factor value to the power supply, helping the power plant

to provide power more efficiently.

The PSU comes with an on/off switch. Make sure you turn the switch to the ON

(I) position before you boot up your computer for the first time. Normally, you

won’t need to switch it OFF (O), since the power supply can be controlled with the

soft on/off switch on the front of your computer case. If your computer crashes

and you can’t shut it down using the soft switch, you can switch the main power

to the OFF (O) position to clear the fault, then reboot.

SETTING UP

1. Take the case out of the box. Remove the Styrofoam and the plastic bag.

Place the case on a flat surface.

2. Remove the thumbscrews from the top panel (at the rear of the case). Slide

the panel to the rear of the case and remove it. Set the panel safely aside.

Note: Please don’t try to use your fingernails to pry or lift the panel.

3. Inside the case you should see the power supply, some wiring with marked

connectors (USB, PWR etc.), an installed I/O panel and a power cord. You will

also find a bag of screws, four rubber feet and two plastic stands.

4. Horizontal Orientation: stick the four adhesive rubber feet to the bottom panel

of the case to protect the paint from scratches.

5. Vertical Orientation: place the Minuet 350 in the two plastic stands such that

the side panel with the 80mm fan is facing up. Adjust the stands to fit snugly

against the case sides.

Although care has been taken to prevent sharp edges in your Antec case, we

strongly recommend taking the appropriate time and caution when working with it.

Please take reasonable precautions.

MOTHERBOARD INSTALLATION

This manual does not cover CPU, RAM, or expansion card installation. Please consult

your motherboard manual for specific mounting instructions and troubleshooting.

1. Lay the case down so that the open side is up. You should be able to see the

drive cage and power supply.

2. Make sure you have the appropriate I/O panel for the motherboard. If the panel

provided is not suitable for the motherboard, please contact the motherboard

manufacturer for the correct I/O panel.

3. Line up the motherboard with the standoff holes. Determine which holes line

up and remember where they are. Not all motherboards will match with all of

the provided screw holes, and this is not necessary for proper functionality.

Some standoffs may be pre-installed for your convenience.

4. Remove the motherboard by lifting it up.

5. Screw in the brass standoffs to the threaded holes that line up with the

motherboard.

6. Place the motherboard on the standoffs.

7. Screw in the motherboard to the standoffs with the provided Phillips-head

screws.

8. The motherboard is now installed.

POWER/LED CONNECTIONS

The power supply is an ATX12V form factor power supply. It has a single 24-pin

Main Power Connector, and a 4-pin +12V Power Connector for the motherboard.

It is backwards compatible to previous ATX form factor power supplies. If your

motherboard does not support the +12V 4-pin Power Connector, you can still use

this power supply. It also comes with three 4-pin Peripheral Power Connectors,

one SATA Power Connector and one 4-pin Floppy Drive Power Connector for your

drives.

1. Connect the 24-pin Main Power Connector and

the 4-pin 12V connector to the motherboard

as needed. If the motherboard uses a 20-pin

connector, detach the 4-pin attachment on the

24-pin power connector (see pictures 1 and 2).

Note: the detachable 4-pin section cannot be

used in place of a 4-pin +12V connector.

2. Power Switch (labeled POWER SW) connects to the PWR connector on the

motherboard. Polarity (positive and negative) does not matter for switches.

3. Connect the Power LED (labeled POWER LED) to your motherboard. For LEDs,

colored wires are positive (+). White or black wires are negative (–). If the

LED does not light up when the system is powered on, try reversing the

connection. For more info on connecting LEDs to your motherboard, see your

motherboard manual.

4. Hard Drive LED (labeled HDD LED) connects to the hard drive activity header.

ADD-IN CARDS

Make sure that any cards you add to your Minuet 350 case are of the “Low-Profile”

variety. Your Minuet is a small form factor case and full-height cards will not fit.

Picture 2

Picture 1

For 24-pin

motherboards

For 20-pin

motherboards

Produktspezifikationen

Marke:	Antec
Kategorie:	Computergehäuse
Modell:	Minuet 350
Breite:	319 mm
Tiefe:	439 mm
Gewicht:	5700 g
Produktfarbe:	Schwarz, Silber
Höhe:	94 mm
Anzahl USB 2.0 Anschlüsse:	2
Zertifizierung:	80 PLUS, RoHS.
Typ:	PC
Stromversorgung:	350 W
Formfaktor:	Niederprofil (superflach)
externe Laufwerkseinschübe:	1 x 5.25", 1x 3.5"
interne Laufwerkseinschübe:	1 x 3.5"
Ventilator:	80mm
Mainboard Größe:	9.6 x 9.6 "