Alpine SGS-CH01 Bedienungsanleitung

Alpine Dashcam SGS-CH01

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Alpine SGS-CH01 (11 Seiten) in der Kategorie Dashcam. Dieser Bedienungsanleitung war fĆ¼r 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
Jeep/Chrysler/Dodge
SGS-CH01 1/11z
Jeep Wrangler
SGS-CH01
Factory Radio Camera Interface
with Active Guideline system
Installation Manual
z Model: Wrangler
z Model Year: 2011-2018 Model Year Active Guidlines Static Guidelines
Jeep Wrangler (JK) 2007-2010
Wrangler (JK) 2011-2018
Note
zī€ƒDesign and speciļ¬cations are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
zī€ƒThe installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
zī€ƒBefore you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
zī€ƒThis manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
DISCLAIMER: The active guideline feature of this product is calibrated for use with JEEP WRANGLER model years
2011-2018. The accuracy of the active guideline system cannot be guaranteed if used in conjunction with other
vehicles or those which contain non-factory parts which may affect the turning radius of the vehicle.
* The speciļ¬ed vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
zī€ƒCongratulations on purchasing the SGS-CH01. This installation manual is designed to take you through the
installation of SGS-CH01. Please familiarize yourself with the owners manual and if you still have additional
questions please call 1-800-TECH-101.
Jeep/Chrysler/Dodge
SGS-CH01 2/11z
Types of Precautions
Forbidden
Indicates actions that are
forbidden (must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Mandatory
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the product.
Doing so could lead to an accident, fire, or
electric shock.
Store screws and other small objects
where small children cannot reach them.
If one of these small objects is swal-
lowed, consult with a doctor immediately.
When replacing fuses, be sure to
use fuses with the specified current
rating. Failing to do so could lead to
an accident or fire.
Only connect the product to a 12 VDC
negative ground car. Failing to do so could
lead to an accident or fire.
Before you begin wiring, remove the
ground wire from the negative terminal of
the battery. Failing to do so could lead to
electric shock or injury.
Do not cut the insulation on a cord and take
power from another device. Doing so could
lead to fire or electric shock.
Do not install the product in a location
where it will obstruct the driverā€™s forward
view; interfere with the operation of the
steering wheel, gearshift, or the like; or
pose a threat to passengers. Doing so could
lead to an accident or injury.
When making a hole in the vehicle body, be
careful to avoid damaging pipes, the fuel
tank, electrical wiring, and the like. This
kind of damage could lead to an accident
or fire.
When installing and grounding the product,
do not use any of the bolts or nuts of the
steering wheel, brakes, fuel tank, or the
like. Doing so could make the brakes stop
working or lead to fire.
Do not install the product near the
passenger-side airbag. Doing so could
interfere with the operation of the airbag
and lead to an accident or injury.
Bundle cords so that they donā€™t interfere
with driving. Wrapping cords around the
steering wheel, gearshift, brake pedal,
or the like, could lead to an accident or
damage equipment.
Caution
Connect the product properly according to
the instructions. Failing to do so could lead
to fire or an accident.
Do not sandwich cords between the seat
railing or allow them to touch protrusions.
Resulting breaks or shorts could lead to
electric shock or fire.
Do not block vents or heat sinks. Doing so
could lead to fire or damage equipment.
Use the accessories according to the
instructions, and attach them securely.
Failing to do so could lead to an accident
or damage equipment.
Do not install the product where it may be
exposed to water or in a place with high
levels of humidity or dust. Doing so could
lead to fire or damage equipment.
The installation and wiring of this product
requires specialized skills and experience.
Have the product installed by an Alpine
authorized dealer.
Forbidden
Forbidden Mandatory
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Jeep/Chrysler/Dodge
SGS-CH01 3/11z
Tools Possibly Required (This Will Vary Depending On The Vehicle)
Panel Removing Tool Sockets Phillips Screwdriver
Wire Cutters Extension Ratchet
Crimpers Pliers Torx Screwdriver
Accessory List
Installation Kit Parts
Interface Module Camera Harness Main Harness
CAM TRIG
Cable Ties x 2 Velcro x 2
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.


Produktspezifikationen

Marke: Alpine
Kategorie: Dashcam
Modell: SGS-CH01

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alpine SGS-CH01 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Dashcam Alpine

Bedienungsanleitung Dashcam

Neueste Bedienungsanleitung fĆ¼r -Kategorien-