Alpine KIT-6IDVII Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Alpine KIT-6IDVII (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1
14. Connectivity Layout
8
INSTALLATION MANUAL
IVECO
Model: Daily VII
Year: > 2019
Kit content: double DIN facia plate; mounting
brackets + screws; SWRC CAN bus & LIN bus
wiring harness; antenna adapters; camera
adapter; USB/AUX adapter; speaker adapter
32
Content and wiring harness connections
1 - to RADIO connector
2 - to CAR connector
3 - POWER ANTENNA output
4 - REMOTE output
5 - to LIN BUS - to Brown cable
(point 7 page 4-5)
6 - to LIN BUS - to White cable
(point 7 page 4-5)
7 - SPEED output (Green) to →
SPEED input of Head Unit
11 - Configuration setting S1/S2
(point 7 / page 4-5)
9 - for future reference:
Black GROUND–
Yellow POWER 12V+–
Red ACC (IGNITION)–
10 - to WIRED SWRC REM Socket
11 - Speaker connection (point 9 / page 6)
12 5)- CAN BUS access (point 7 / page 4-
13 - FAKRA antenna adapter
14 - ISO/DIN antenna adapter
15- USB/AUX adapter
OPTIONAL 1 C1 (point 7 / page 4-→5)
OPTIONAL 2 (point 9 / page 6)→
1. This is how the original dashboard looks
like.
2. Remove the drawer and unscrew the
two screws as shown in the picture.
3. Remove the rubber compartment as
shown in the picture.
4. Unscrew the central screw and remove
the original facia.
5
6
4
7
9
13
10
Optional 1
Optional 2
1
3
2
11
12
14 15
8
5. In order to fit the radio unit some plastic
parts need to be cut and removed. The
parts to be removed are the four flaps
and the plastic rectangular central
protrusion highlighted in the pictures.
6. Connect the harness as indicated on left
side (page 2).
ATTENTION!
In order to prevent ESD damage, the STEERING WHEEL REMOTE JACK (10)
must be connected before plugging in the connectors on car side.
CONFIGURATION STEP 1 STEP 2
Configuration radio steering wheel without
controls and open dash
C2 and C3 connected. S1 and S2 connected.not
Configuration with radio steering wheel
controls and open dash
Remove the tape and connect the Brown and
thin White cable to cable (5&6) (see page 2)
of the interface harness.
C1 and C3
connected. S1 and S2 –not
connected.
Configuration with radio steering wheel
controls and DAB radio
C2 and C3 connected. S1 and S2 connected.
Configuration with radio steering wheel
controls and -CONNECT radioHI
Not compatible with Daily VII and HI-CONNECT
radio
7. Set the harness according to the configuration of your vehicle.
5


Produktspezifikationen

Marke: Alpine
Kategorie: Nicht kategorisiert
Modell: KIT-6IDVII

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alpine KIT-6IDVII benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Alpine

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-