Alesis SamplePad Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Alesis SamplePad (33 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/33
SAMPLEPAD
QUICKSTART GUIDE
ENGLISH ( 2 – 6 )
MANUAL DE INICIO RÁPIDO
ESPAÑOL ( 7 –11 )
GUIDE D'UTILISATION RAPIDE
FRANÇAIS ( 12 – 16 )
GUIDA RAPIDA
ITALIANO ( 17 – 21 )
KURZANLEITUNG
DEUTSCH ( 22 – 26 )
2
BOX CONTENTS
SamplePad
Power adapter
Quickstart Guide
Safety Instructions & Warranty Information Booklet
CONNECTION DIAGRAM
TOP PANEL FEATURES
1. PAD – Strike these single-zone pads with a drumstick.
2. VOLUME – Adjusts the volume level.
3. LCD Displays the current parameters and other
operations.
4. VALUE +/- – Decreases or increases the value of each
parameter.
5. SELECT +/-Moves up or down through the available
modes.
6. PAD INDICATORS – An LED in this section will
illuminate when that pad is struck.
7. SD CARD SLOT – Plays a .Wav file from the SD Card
WARNING: Put on your headphones or turn on your
speakers only AFTER turning on the SamplePad.
* Sold separately
OR
HEADPHONES*
SPEAKERS*
POWER
MODULE
MOUNT*
KICK PAD*
("TRIGGER")
FOOTSWITCH*
("SWITCH")
1
2
3
45
6
7
3
REAR PANEL FEATURES
1. DC INPUT – Connect
the included power
adapter here, then
connect the adapter to
wall power.
2. POWER SWITCH
Turns the SamplePad
on and off.
3. MAIN OUT – Use
standard 1/4" cables to
connect this output to a speaker or amplifier system. The level of this output is controlled by the VOL knob. (For
mono sound, connect a cable only to the Left output.)
4. HEADPHONES – Connect a pair of 1/4" headphones to this input.
5. KICK PEDAL INPUT – Connect an optional footswitch here with a 1/4" mono cable to use as a bass drum
trigger while playing.
6. KICK TYPE SWITCH – Set this switch to select the type of external kick trigger (sold separately) you are using
with the unit. Select "SWITCH" if you are using a switch pedal or footswitch. Select "TRIGGER" if you are using
a velocity-sensitive pedal, pad, or acoustic drum trigger.
7. MIDI OUT – Use a standard five-pin MIDI cable to connect this output to the MIDI IN of an external MIDI
device.
LCD SCREEN
1. KIT Displays the preset number.
2. SOUND LOCATION Displays the sound
location; either internal or on the SD card.
3. WARNING MESSAGE Displays a
warning message or tips.
4. SOUND NAME – Displays the name of
the selected sound from the
internal sound library or an inserted
SD card (sold separately).
5. OTHER PARAMETERS Displays the
tuning, sensitivity, panning, reverb, level,
and MIDI note.
BASIC OPERATIONS
SELECTING THE KIT
Move the Cursor to the kit area by pressing [SELECT -]
button continuously. Press the [VALUE +] or [VALUE -]
button to scroll through the 8 kit numbers. Hold down the
[VALUE +] or [VALUE -] buttons to rapidly scroll through the
kits. The kit will automatically load when you stay on the
preset for a few seconds. Edits made to a kit will be
automatically saved.
Note: The kit setting includes each pad’s sound location,
sound name or number, level, tune, reverb, pan, MIDI note,
and sensitivity.
12
345
6
7
1 2
34
5


Produktspezifikationen

Marke: Alesis
Kategorie: Nicht kategorisiert
Modell: SamplePad

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alesis SamplePad benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Alesis

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-