Alesis Crimson II SE Mesh Kit Bedienungsanleitung

Alesis Nicht kategorisiert Crimson II SE Mesh Kit

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Alesis Crimson II SE Mesh Kit (60 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 50 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/60
User Guide
English ( 3 – 13 )
GuĂ­a del usuario
Español ( 14 – 24 )
Guide d’utilisation
Français ( 25 – 35 )
Guida per l’uso
Italiano ( 36 – 46 )
Benutzerhandbuch
Deutsch ( 47 – 57 )
Appendix
English ( 58 – 59 )
2
3
User Guide ( )English
Introduction
Box Contents
Crimson II Drum Module User Guide
Power Adapter Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit alesis.com.
For additional product support, visit alesis.com/support.
Features
Top Panel
1. Power Input: Connect this input to a power
outlet using the included power adapter.
2. USB Port: Connect a USB flash drive to this
USB port to record songs to it, load samples
from it, save kits to it, or load kits from it.
See Operation > USB Drive to learn more.
Important: Your USB flash drive must use a
FAT32 file system to work properly with the
drum module.
3. Power Button: Press this button to power
the drum module on or off.
4. Master Volume: Turn this knob to adjust the
volume level of the outputs on the rear panel.
5. Phones Volume: Turn this knob to adjust
the volume level of the phones output on
the rear panel.
6. Display: This screen shows various menus
and options to help you configure and use the
drum module. See Operation to learn more.
7. Menu: Press this button to access the Kit Menu in the display.
8. Down: Press this button to move down one option in the display.
9. Up: Press this button to move up one option in the display.
10. Enter: Press this to confirm your selection or to enter a submenu.
11. Exit: Press this button to cancel your selection or to exit a submenu.
1
3
4
5
6
78 9 10 11
12
13 14 15 16
17 18
19
20 21
2
4
12. Dial: Turn this dial to adjust the setting of the currently selected item in the display
(number values, kits, songs, etc.). Alternatively, use the Left () and Right () buttons.
13. Click: Press this button to activate or deactivate the built-in metronome (“click”). When
you activate it, the Metronome settings will also appear in the display, which you can
adjust. See Operation > Metronome to learn more.
14. Song: Press this button to access the Song Selection page in the display. See Operation
> Songs to learn more.
15. Kit: Press this button to access the Kit Selection page in the display. See Operation >
Kits to learn more.
16. Save: Press this button to save the settings of the current kit. See Operation > Kits to
learn more.
17. Tempo: Press this button to view the current tempo in the display. See Operation >
Metronome to learn more.
18. Record: Press this button to record-arm the drum module. To start recording, hit a drum
pad, press Enter, or press Start/Stop. To cancel recording, press Exit or Record. See
Operation > Songs to learn more.
19. Start/Stop: Press this button to play or stop a song. When the drum module is record-
armed, press this button to start recording.
20. Left (): Press this button to decrease the value of the selected item (or move to the
previous setting) in the display. Alternatively, turn the dial.
21. Right (): Press this button to increase the value of the selected item (or move to the next
setting) in the display. Alternatively, turn the dial.
Rear Panel
1. Phones Output: Connect 1/8” (3.5 mm)
stereo headphones (sold separately) to this
output. Control the volume by turning the
Phones Volume knob on the top panel.
2. Aux Input: Connect an additional audio player
(smartphone, tablet, etc.) to this input using a
standard 1/8” (3.5 mm) stereo/TRS cable. The
sound will be mixed with the drum module’s
sounds.
3. Outputs: Connect your audio interface, mixer, powered monitors, etc. to these outputs
using standard 1/4” (6.35 mm) TRS cables.
4. Crash 2 Trigger Input: Connect the included Crash 2 cymbal pad to this input using a
standard 1/4” (6.35 mm) TRS cable.
5. Tom 4 Trigger Input: Connect an optional single- or dual-zone drum pad to this input
using a standard 1/4” (6.35 mm) TS or TRS cable, respectively.
6. MIDI In: Connect an external MIDI device (sequencer, drum machine, etc.) to this input
using a standard 5-pin MIDI cable.
7. MIDI Out: Connect an external MIDI device (synthesizer, sound module, etc.) to this
output using a standard 5-pin MIDI cable.
8. USB MIDI Port: Connect this USB port to a computer using a standard USB cable. The
drum module will send MIDI messages to your computer over this connection.
1
2
33
45
67
8


Produktspezifikationen

Marke: Alesis
Kategorie: Nicht kategorisiert
Modell: Crimson II SE Mesh Kit

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alesis Crimson II SE Mesh Kit benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Alesis

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-