Alcatel XL785 Bedienungsanleitung

Alcatel Telefon XL785

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Alcatel XL785 (3 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

XL785 / XL785 Duo

5.2. Call from the Phonebook

In idle:

1. Press to access the phonebook. OR

Press and / to select Phonebook

main menu item and then press to access the

phonebook.

2. Press to dial out to the selected phonebook entry.

Phonebook is stored in base unit which is shared

with duo, trio handsets.

5. PRIVATE PHONEBOOK

Your phone can store up to 100 private phonebook

entries with names and numbers. Each phonebook

entry can have a maximum of 24 digits for the phone

number and 12 characters for the name.

You can also select different ringtones for your

phonebook entries. Phonebook entries are stored

alphabetically by name.

5.1. Add a New Phonebook Entry

In idle:

1. Press to access the phonebook. OR

Press and / to select main Phonebook

menu item and then press to access the

phonebook.

2. Press to select .Add New

3. Press to enter the name.

4. Press to enter the number.

5. Press and / to select the desired ringtone

for your phonebook entry.

6. Press to confirm the melody,

7. Press or to select VIP X or VIP √.

8. Press to confirm to save it as normal

contact list (VIP X) or save it in VIP list (VIP √).

Note: ! appears in the end of name of VIP entry.

4.1.3. Dial from Direct Memory Keys

In idle or off hook mode,

Press , or to dial the stored number.M1 M2 M3

Press and hold / / to dial the direct memory

number. You have to store number to the related

key first. See section 8.3 for reference.

4.1.2. Direct Dialing

Press to take the line and enter the phone number.

4. USING YOUR PHONE

4.1. Make a Call

4.1.1. Preparatory Dialing

Enter the phone number and press to dial the number.

Press to clear the entry.

4.1.5. Adjust Earpiece and Handsfree Volume

There are 5 levels (Volume 1 to Volume 5) to choose

from for each of earpiece and handsfree volume.

During a call:

Press / to select volume 1-5. The current setting

is shown. When you end the call, the setting will

remain at the last selected level.

The current volume is displayed on the screen.

When you end the call, the new volume setting sound

remains valid for subsequent calls.

3.3. Connecting the Charger(s)

(for Duo/Trio models)

Plug the power adapter into a 230Vac, 50Hz mains socket.

If you have broadband service, a micro-filter

(not included) is required.

3. INSTALLING YOUR PHONE

3.1. Connecting the Base Station

1. Plug one end of the telephone line cord into the

telephone jack on base bottom.

2. Plug the small end of power adapter into a power jack

on base bottom.

3. Plug the large end of power adapter into a

wall power outlet.

4. Plug the other end of the telephone line cord in to the

telephone jack or micro-filter.

5. Always use the cables provided in the box.

3.2. Installing and Charging the Batteries

1. Slide down to open the battery compartment cover.

2. Place the 2 batteries as indicated.

Pay extra attention to direction of Respect polarity.

3. Slide the battery compartment cover back.

4. Put the handset on the base and charge for 8 hours

before using the handset for the first time.

The handset will give a beep when it is properly

placed on the base or charger.

Notes:

1. Use only NiMH rechargeable batteries.

2. If the handset will not be used for a long time, disconnect

and remove the batteries to prevent possible leakage.

2. PRECAUTIONS

The signal quality will depend on the location and

environment of the base and handset.

Position your XL785 away from sources of excessive

heat (radiators, direct sunlight, etc.) and protect it

from vibrations and dust. Never allow your telephone

to come into contact with water or other liquids, or

with aerosols. To reduce the risk of interference and

optimize reception, take particular care not to install

the base in the immediate vicinity of windows,

large metal objects, reinforced concrete, televisions,

music centres, halogen lamps or heating devices,

fluorescent lighting, burglar alarms, microwave ovens,

computers, etc.

This telephone requires an electrical power supply in

order to function.

To clean your XL785 use an antistatic cloth lightly

moistened with water.

1.2. Base Station Overview

Press the Page on the base station to page your

handset. It will ring for approximately 60 seconds.

Press and hold on the base station for about

five seconds, the base station will enter into

registration mode and is ready for handset

registration.

In idle mode: Press to access the main menu.

In sub-menu mode: Press to confirm the selection.

During a call: Press to access Intercom/ Phonebook/

Redial List/ Call List.

2. *

*In main menu mode: Press to go to Call Block

Setting menu

In ringing mode: Press to block incoming call*

if Block Set. is set to ON

In idle mode: Press to access the phonebook.

In menu mode: Press to scroll up the menu items.

In Phonebook list / Redial list / Call List:

Press to scroll up the list.

During a call: Press to increase the volume.

In ringing: Press to increase the ringer volume.

In menu mode: Press to scroll down the menu items.

In Phonebook list / Redial list / Call List:

Press to scroll down the list.

During a call: Press to decrease the volume.

In ringing: Press to decrease the ringer volume.

During a call:

Press to end a call and go back to idle screen.

In menu / editing mode:

Press to go back to previous menu.

In menu / editing mode:

Press and hold to go back to idle screen.

In editing / predialing mode:

Press to clear a character / digit.

During ringing: Press to set ring volume off.

6. M1, M2, M3

In idle mode /During a call:

Press to dial pre-recorded number stored in Direct Mem.

1. GETTING TO KNOW YOUR PHONE

1.1. Handset Overview (Alcatel XL785)

6.1. View the Call List

All received calls are saved in Call List with the latest

call putting at the top of the list. When the call list is

full, the oldest call will be replaced by a new call.

The unanswered call which has not been read is

marked with .

1. Press and hold key. OR

Press and / to select , press .Call list

2. Press / to select the desired entry.

6. CALLER DISPLAY (NETWORK DEPENDENT)*

This feature* is available if you have subscribed the

Caller Line Identification service with your telephone

service provider. Your phone can store up to

50 received calls with date/time information in the

Call List. The number will be shown on the LCD when

the phone is ringing.

If the caller number is disabled to send caller

information, “ ” will display.Withheld

If the caller number is not provided, “ ” Out of Area

will display.

In standby, if three unanswered calls are received,

“ ” will be displayed.3 New Calls

1.3. Display Icons and Symbols

After first time power up (base unit is connected to

AC mains), welcome mode (country) will appear

on the screen:

e.g.

01-01-2021

e.g. 00:00

Note: For Duo or Trio versions, all you have to do is

configure a single handset, the other handset (s) will be

automatically set identically.

Change language (Handset)

1. Press on the handset in idle mode.

2. Press or to select " "(1), then press .HS Settings

(1)

3. Press or to the menu " "(2), Language

then press .

(2)

4. Press or to the desired language, then press .

HS Settngs

Handset Inst

Régl. Comb.

Conf Telef.

Mt-Einstel.

Config. Term

Imposta Port

Language

Taal

Langue

Idioma

Sprache

Idioma

Lingua

7. key

Press to insert #

In idle mode: Press and hold to access the call list.

In predialling mode / during a call:

Press and hold to insert pause.

8. key

Press to insert *

In idle mode: press and hold to access the redial list.

9. ALPHANUMERIC KEYPAD

Press to insert a digit / character / * / #

0 key in predialing / number editing mode:

Press and hold to insert a flash

1, 2, 3 key in idle/off hook mode, press and hold to

dial the stored direct memory number.

0 key during a call:

Press and hold to start conference call

(in intercom mode).

10.

In idle / predialing mode : Press to make a call.

In Redial list / Call List / Phonebook entry:

Press to make a call to the selected entry in the list.

During ringing: Press to answer a call.

During a call: Press to switch to speaker mode.

11. HANDSET LED

During charging: On steadily.

In ringing mode / Paging mode: Flashing quickly.

When new voice mail: Flash slowly

12. AUDIO BOOST

During a call: Press to audio boost on/off

(inactive in speakerphone mode).

4.1.4. Call from the Redial List

Press and hold to access the redial list and press

/ to select the desired redial number.

Press to dial out to the selected redial number.

On indicates either Call Block Setting is set to ON

or Block Anonymous Setting is set to ON.

Steadily on when the handset is in range of the base.

Flashes when out of range of the base or

not registered to the base.

Steadily on indicates a call is in progress.

Flashes when there is an incoming call.

Indicates that handsfree is being used.

Steadily on when an alarm is set.

Flashes when the alarm time set before reaches.

Indicates when there are received

new Voice Message Waiting (VMWI) not yet read.

Indicates that the ringer is switched off.

Indicates when the battery is fully charged.

Whole icon flashes when the battery performs initial

charging.

Internal block icon flashes when the battery is in

final charging stage.

7. REDIAL THE LAST NUMBER

You can redial up to 10 of the last numbers called.

1. In idle mode, press and hold key to access the

redial list.

2. Press or to browse the redial list.

3. Press to dial the selected redial number.

6.2. Call from the Call List

In idle:

1. Press and hold key. OR

Press and / to select , press .Call list

2. Press to dial out to the selected phonebook entry.

Flashes when low battery power level is detected.

On indicates it's a new call which has not been read

in call log and * will be shown in the end of call

number or name. After read, * will disappear.

Flashes when the call list is being accessed.

On indicates audio boost is on (earpiece of handset

will be louder).

Flashes when phonebook is being accessed.

Flashes when redial list is being accessed.

Hearing Aid Compatibility:

- Special feature which helps to eliminate background

noise and interference when you use this telephone

with a hearing aid.

For the sound level of the handset, if this is not loud

enough, press , the audio boost will be

activated (+10dB). To turn off audio boost, press

again the key .

QUICK GUIDE(EN)

9. REGISTRATION

Your handset and base station is pre-registered.

Up to 4 handsets can be registered to

a single base station.

If for some reason, the handset is not registered

to the base station flashes even when

the handset is near the base station).

1. Press and hold on the base station for about

five seconds, the base station is entered into

registration mode.

2. Press and / to select .Registration

3. Press and select the destination base you

would like to register to.

4. Press and you are requested to enter the

4-digit system PIN.

Enter the 4-digit system PIN (default PIN is 0000).

5. Press to confirm.

If the handset registration is successful, you will hear

a confirmation tone and the will stop flashing.

If the handset registration is unsuccessful,

the will still flash.

10. CALL BLOCK

This telephone is built-in with Smart Call Block feature*.

This feature will help you avoid nuisance calls by only

allowing some numbers to make your phone ring.

Default setting of Smart Call Block in this telephone is

OFF but you can enable it via your phone settings,

as explained in the following paragraphs.

*This feature requires a subscription of Caller Line Identification

service from your telephone service provider.

CALL BLOCK OVERVIEW

Explanations

Call Block function (Block all call with numbers)

is Disabled.

This is the default mode.

Call Block function is set to Manual. Numbers

registered in the black list will not go through

and the phone will ring silently.

Numbers can be added to the list while the

phone is ringing and / or after a call

(to enable, see part 10.1).

In this automatic mode, any number not

registered to your phonebook will be

automatically be blocked and not cause your

phone to ring.

All calls from contacts registered to your

phonebook will proceed normally.

When this mode is chosen, Contacts OK is

displayed on LCD in idle mode unless you have

unread messages/missed calls

(to enable, see part 10.2.2).

In this second automatic mode, only calls from

contacts registered as VIP in your phonebook

will go through and cause your phone to ring.

Any other number will not ring. When this mode

is chosen, VIPS OK is displayed on the LCD in

idle mode unless you have unread messages /

missed calls (to enable, see part 10.2.1).

This extra feature allows you to block call that

do not have a number attached to them (ie

private calls, international calls, etc).

This option can be enabled on top of any of the

previous four (to enable, see part 10.3).

Settings

Off

Contacts

VIPS

Anonymous

Menu Call block Block set. Off

On*

VIP OK

Contacts OK

10.2. AUTOMATIC CALL BLOCK MODE

10.2.1. VIPs only

In this restrictive automatic mode, only calls from

numbers registered as VIP in your phonebook will go

through and make your phone ring.

Menu Call block Block set. Off

VIP OK*

Contacts OK

Menu Call block Block set. Off

VIP OK

Contacts OK*

1. Press < >, press < > or < > to select

Call Block.

2. Press < >, press < > or < > to select

Block set.

3. Press < >, press < > or < > to select

VIP OK (Automatic mode).

10.2.2. Contacts only

In this broad automatic mode, only calls from contacts

registered in your phonebook (normal and VIP) will go

through and make your phone ring.

1. Press < >, press < > or < > to select

Call Block.

2. Press < >, press < > or < > to select

Block set.

3. Press < >, press < > or < > to select

Contacts OK (Automatic mode).

10.3. Anonymous call block mode

This feature allows you to block numbers that do not

display a number on your phone. It can be enabled or

disabled independently from the previous call block

modes.

Menu Call block Block anonym Private*

All

Off

1. Press < >, press < > or < > to select

Call Block.

2. Press < >, press < > or < > to select

Block anonym.

3. Press < >, press < > or < > to select one

of the options.

10.1.3. Edit numbers in Blacklist

In idle mode,

1. Repeat step 1 and 2 in Section 10.1.2.

2. Press < >, press < > or < > to select ,Edit

press < > or < > to select number to be edited,

press < > to edit, and then press < > to save.

10.1.4. Delete numbers in Blacklist

10.1.4.1. Delete a number from blacklist

In idle mode,

1. Repeat step 1 and 2 in Section 10.1.2.

2. Press < >, press < > or < > to select

Delete, press < > or < > to select number to

be deleted, press < >, is shown, and Confirm?

then press < > to confirm.

10.1.4.2. Delete all numbers from blacklist

In idle mode,

1. Repeat step 1 and 2 in Section 10.1.2.

2. Press < >, press < > or < > to select

Delete all Confirm?, press < >, is shown,

and then press < > to confirm.

Alcatel XL785 / XL785 duo

A/W No: 10002417 Rev.1 (EN)

Printed in China

12. TROUBLESHOOTING

If you have difficulty with your phone, please try the

suggestions listed below.

As a general rule, if a problem occurs, remove the

batteries from all the handsets in your installation for

about 1 minute, then disconnect and reconnect the power

supply to the base and reinstall the handset batteries.

Problem

No dialing tone

when pressing

key

" " OUT OF RANGE

is displayed.

The call does not

work.

No display.

Cause

a. The connection

cord of the base

station is not

plugged in.

b. The adapter cord

is not plugged in

correctly in the

base station.

c. The line is busy, as

another handset is

used.

a. Base station out

of range.

b. Base station not

connected to

mains.

Service not activated

or wrong operator or

wrong setting

Empty battery

Solutions

a. Check the

connections.

Unplug and plug

back in the mains.

Check that the

telephone line cord

has been plugged

into the base

station and the

phone socket.

b. Check the base

station plug and

the 220V plug

(remove and

plug-in).

c. Use the original

connection cord.

a. Reduce the range.

b. Connect base

station to mains.

Check your

Subscription with

network.

Recharge battery

11. TECHNICAL DETAILS

Free Field Range

Indoor Range

Handset Battery Life

(average values)

Number of Handsets(total)

Intercom Mode

Three-Way Conference

(1 outside correspondent

+ 2 internal correspon-

dents)

Electrical Connection /

Base Mains Adaptor /

Charger

Telephone Connection

Batteries

Operating Temperature

Up to 300 metres*

Up to 50 metres*

10 hours talk time**

100 hours standby**

Up to 4

Yes

Base & Charger main adaptor:

Model No.:

AT-337E-060045 /

1-CHEUA451-081

Input: 100-240 V/50-60 Hz / 0,15 A

Output: 6 V CC / 450 mA, 2.7W

Only use the adaptors supplied

with the telephone

Single-phase AC, excluding IT

installations defined by the

N62368-1 standard.

Caution: The network voltage is

classified as a hazard by the

criteria of this standard.

Appliance designed for connection

to a TRT3 class (telecommunica-

tions network voltage) analogue

telephone line as defined by the

N62368-1 standard.

AAA – 1.2 V – 300mAh (NiMH

rechargeable)

Only use the batteries supplied

with the telephone.

Use any other type of battery

presents a risk of explosion. Used

batteries must be disposed of in

compliance with current

environmental protection

regulations.

From 5°C to 40°C

* Values may vary according to environment.

** Depending on initial battery charge.

The Manufacturer reserves the right to modify the specifications of its products

in order to make technical improvements or comply with new regulations.

ALCATEL and ATLINKS are registered trademarks.

Alcatel is a trademark of Nokia, used under license by ATLINKS.

8. PHONE SETTING

8.1. Set the Ringer Melody for Internal/

External Calls

1. Press and / to select .HS Settings

2. Press and / to select .Ring Setup

3. Press and / to select or Int Ring

Ext Ring.

4. Press and / to select the desired ringer

melody from the melody list.

Note: The respective ringer melody will be played

while browsing the melody list.

5. Press o confirm.

8.3. Set the Speed Dial

1. Press and or to select .Direct Mem

2. Press , and then press the memory key M1/M2/M3/

<KEY 1>/< KEY 2>/< KEY 3>.

For M1/M2/M3:

1. Press to input name

2. Press to enter number

3. Press to browse the melody list, and then press

to confirm the melody,

4. Press or to select VIP X or VIP √.

5. Press to confirm to save it as normal contact list

(VIP X) or save it in VIP list (VIP √).

For <KEY 1>/< KEY 2>/< KEY 3>:

1. Press to input number, and then press

to confirm.

10.3.1.

Block Private Calls

This mode will block incoming calls that have been

purposely kept their numbers private from you.

In idle mode,

1. Press <

> key, . is displayed, or Block set

Press <

> to press <

> or <

> to select

Call block, press <

> to show . Block set

2. Press <

> or <

> to select .Block anonym

3. Press <

> to press <

> or <

> to select

Private, press <

> to confirm.

4. will be displayed on the lower side of LCD.

10.3.2. Block All Anonymous Calls

This mode will block all incoming calls, including private

calls, international calls, pay phone and other

out-of-area calls.

In idle mode,

1. Repeat step 1 and 2 in Section 10.3.1.

2. Press <

>, press <

> or <

> to select , All

press <

> to confirm.

3. will be displayed on the lower side of LCD.

10.3.3. Set Block Anonymous Calls OFF

In idle mode,

1. Repeat step 1 and 2 in Section 10.3.1.

2. Press <

>, press <

> or <

> to select , Off

press <

> to confirm.

3. will only disappear from the LCD if the regular

call block (see 10.1. And 10.2.) is also set to OFF.

13. SAFETY

This telephone is not designed for Emergency calls when the

main power fails.

Do not use your telephone to notify a gas leak or other

potential explosion hazard.

Do not open your device or its power supply to avoid risk of

electrical shock. Do not attempt to open the batteries, as they

contain hazardous chemical substances.

Your telephone must be located in a dry place away from hot,

humide and direct sunlight condition. To avoid radio signal

interference, place the phone at least 1 meter away from

other electrical appliances or other phones.

14. ENVIRONMENT

This symbol means that your inoperative electronic

appliance must be collected separately and not mixed

with the household waste.The European Union has

implemented a specific collection and recycling system for

which producers are responsible.

Help us protect the environment in which we live!

15. CONFORMITY

Hereby, ATLINKS EUROPE declares that the radio equipment is

in compliance with Directives 2014/53/EU. The full text of the

EU declaration of conformity is available at the following

internet address: www.alcatel-home.com

Average power per channel: 10mW

Maximum Output Power (NTP) : 24dBm

Frequency Range : 1880-1900MHz

Hereby, ATLINKS EUROPE declares that the radio equipment

type DECT is in compliance with Legislation : Radio Equipment

Regulations 2017 (SI 2017/1206). The full text of the UKCA

declaration of conformity is available at the following internet

address: www.alcatel-home.com

8.2. Set the Ringer Volume

1. Press and / to select .HS Settings

2. Press and / to select .Ring Setup

3. Press and / to select .Ring Volume

4. Press and / to select the desired ringer

volume (a total of 6 ringer volume levels

including OFF).

Note: The respective ringer volume will be played

during your selection.

If OFF is selected, icon will display.

5. Press to confirm.

10.1. Manual call block mode

Manual call block is the easiest option when starting

out. When you chose in the call block settings, all ON

calling numbers registered in your blacklist will be

blocked. You can add/remove numbers from that list

at any time.

How to block an incoming call:

When the phone is ringing and before answering,

press . It will terminate the call and offer you the

option to register the number to the blacklist in one

click.

Then to confirm the registration of this number in the

blacklist, press < >.

IMPORTANT: if you don’t confirm, the number will not

be added to the blacklist and the next call will go

through normally.

10.1.1. Enable MANUAL mode

Press < >, press < > or < > to select Call Block.

Press < >, press < > or < > to select Block set.

Press < >, press < > or < > to select ON

(manual mode). Or

In idle mode, press to access directly. After you Block set.

enable this option, the call block icon will be displayed

on the LCD.

10.1.2.

Add numbers to Blacklist

In idle mode,

1. Press < > key, . is displayed, or Block set

Press < > to press < > or < > to select

Call block,

press < > to show . Block set

2 Press < > or < > to select . Blocklist

3. Press < >, press < > or < > to select , Add

enter number to be blocked, press < > to save.

NOTE: 2 more ways to add incoming and outgoing

call numbers in Block list:

1. From incoming call numbers

- Press < >, press < > or < > to select

Call list or press and hold < > key.

- Press < >, press < > or < > to select

call list entry.

- Press < >, press < > or < > to select to

Add to Block.

- Press < > to show selected number,

press < > to save to Block list.

2. From outgoing call numbers

- Press and hold key, press < > or < > to

select redial list entry.

- Press < >, press < > or < > to select to

Add to Block.

- Press < > to show selected number,

press < > to save to Block list.

Produktspezifikationen

Marke:	Alcatel
Kategorie:	Telefon
Modell:	XL785
Freisprecheinrichtung:	Ja
Anrufer-Identifikation:	Ja
Produktfarbe:	Weiß
Akku-/Batterietyp:	AAA
Akku-/Batterietechnologie:	Nickel-Metallhydrid (NiMH)
Befestigungstyp:	Tisch/Bank
Eingebautes Display:	Ja
Lautstärkeregler:	Tasten
Hörertyp:	Kabelloses Mobilteil
Telefonbuch Kapazität:	100 Eintragungen
Anrufbeantworter:	Nein
Display-Hintergrundbeleuchtung:	Ja
Typ:	Analoges/DECT-Telefon
Anzahl Melodien:	10
Abmessungen des Mobilteils (BxTxH):	52 x 30 x 177 mm
Anzahl unterstützter Akkus/Batterien:	2
Textzeilen:	4 Zeilen
Farbe der Hintergrundbeleuchtung:	Blau
Anrufblockierung:	Ja
Dialerposition:	Mobilteil
Maximum Innenabstand:	50 m
Maximum Außenabstand:	300 m
Abmessungen Basis:	85 x 80 x 80 mm
Anzahl der Rufton-Lautstärken:	5
Große Knöpfe:	Ja
RJ-11-Stecker:	Ja
Anzahl der Mobilteil-Lautstärkestufen:	5