Alcatel Versatis F200 Duo Bedienungsanleitung

Alcatel Telefon Versatis F200 Duo

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Alcatel Versatis F200 Duo (4 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

BEFORE TO USE YOUR PHONE, PLEASE READ ALL

THIS USER'S GUIDE

1. KNOWING YOUR PHONE

1.1. Handset Overview (Versatis F200 Only)

1. M

In idle mode: Press to access the main menu

In sub-menu mode: Press to confirm the selection

During a call: Press to access Intercom/Phonebook/Redial

List/Call List

2. C

In main menu mode: Press to go back to idle screen

In sub-menu mode: Press to go back to previous level

In sub-menu mode: Press and hold to go back to idle screen

In editing/predialing mode: Press to clear a character/digit

In editing/predialing mode: Press and hold to delete all the

characters/digits

In keeping with our environmental preservation and

compliance commitment, we include mini-guides in our

packaging. More complete instructions and online assistance

are available on our website:

www.atlinks.com

Ecologic

att tudei

During a call: Press to mute/unmute the microphone

In idle mode: Press to intercom another handset

In ringing: Press to suppress handset ringer

3. +

In idle mode: Press to access the call list

In menu mode: Press to scroll up the menu items

In Phonebook list/Redial list/Call List: Press to scroll up the

list

During a call: Press to increase the volume

In ringing: Press to increase the ringer volume

4. -

In idle mode: Press to access the redial list

In menu mode: Press to scroll down the menu items

In Phonebook list/Redial list/Call list: Press to scroll down the

list

During a call: Press to decrease the volume

In ringing: Press to decrease the ringer volume

5. O

During a call: Press to end a call and go back to idle screen

In menu/editing mode: Press to go back to previous menu

In menu/editing mode: Press and hold to go back to idle

screen

In idle mode: Press and hold to power off the handset

In idle mode: Press and hold to power on/off the handset

6. R

In idle/predialing mode: Press to insert a flash

During a call: Press to dial a flash

7. P

In idle mode: Press to access the phonebook list

8. E

In idle mode: Press to access the redial list

9. ALPHANUMERIC KEYPAD, *, #

* key in idle mode: Press and hold to enable or disable the

keypad lock

# key in idle mode: Press and hold to turn on/off the ringer

# key in call list mode: Press to review caller’s number if

applicable

0 key in predialing/number editing mode: Press and hold to

insert a pause

1, 2, 3 key in idle/off hook mode, press and hold to dial the

stored direct memory number

10.

In idle/predialing mode: Press to make a call

In Redial list/Call List/Phonebook entry: Press to make a call

to the selected entry in the list

During ringing: Press to answer a call

1.2. Handset Overview (Versatis F250 only)

1. M

In idle mode: Press to access the main menu

In sub-menu mode: Press to confirm the selection

During a call: Press to access Intercom/Phonebook/Redial

List/Call List

2. C

In main menu mode: Press to go back to idle screen

In sub-menu mode: Press to go back to previous level

In sub-menu mode: Press and hold to go back to idle screen

In editing/predialing mode: Press to clear a character/digit

In editing/predialing mode: Press and hold to delete all the

characters/digits

During a call: Press to mute/unmute the microphone

In idle mode: Press to intercom another handset

In ringing: Press to suppress handset ringer

3. +

In idle mode: Press to access the call list

In menu mode: Press to scroll up the menu items

In Phonebook list/Redial list/Call List: Press to scroll up the

list

During a call: Press to increase the volume

In ringing: Press to increase the ringer volume

4. -

In idle mode: Press to access the redial list

In menu mode: Press to scroll down the menu items

In Phonebook list/Redial list/Call List: Press to scroll down the

list

During a call: Press to decrease the volume

In ringing: Press to decrease the ringer volume

5. O

During a call: Press to end a call and go back to idle screen

In menu/editing mode: Press to go back to previous menu

In menu/editing mode: Press and hold to go back to idle

screen

In idle mode: Press and hold to power off the handset

In idle mode: Press and hold to power on/off the handset

6. R

In idle/predialing mode: Press to insert a flash

During a call: Press to dial a flash

7. P

In idle mode: Press to access the phonebook list

8. S

During a call: Press to turn on/off the speakerphone

In Idle mode/Predialing mode/Redial list/Call List/Phonebook

entry: Press to make a call with speakerphone

During ringing: Press to answer a call with speakerphone

9. ALPHANUMERIC KEYPAD,

*, #

* key in idle mode: Press and hold to enable or disable the

keypad lock

# key in idle mode: Press and hold to turn on/off the ringer

# key in call list mode: Press to review caller’s number if

applicable

0 key in predialing/number editing mode: Press and hold to

insert a pause

1, 2, 3 key in idle/off hook mode, press and hold to dial the

stored direct memory number

10.

In idle/predialing mode: Press to make a call

In Redial list/Call List/Phonebook entry: Press to make a call

to the selected entry in the list

During ringing: Press to answer a call

1.3. Base Station Overview

1. A

Press on the base station to page your handset. It will A

ring for approximately 60 seconds.

Press and hold A on the base station for about five seconds,

the base station is entered into registration mode and allows

handset registration.

2. , @

Steadily on while the handset is charging or in use. (Applicable

only when the LED I/O switch is slid to “I”)

Flash when receiving an incoming call. (Applicable only when

the LED I/O switch is slid to “I”)

3. LED I/O SWITCH (Bottom of the Base)

Slide the switch to "O" position to turn off the base LED

Slide the switch to "I" position to turn on the base LED when

the handset is charging on the base or in use

1.4. Display Icons and Symbols

The LCD display gives you information on the current status of

the telephone.

hSteadily on when the handset is in range of the base.

Flash when out of range of the base or not registered to

the base.

jSteadily on when an intercom is in progress.

Flash when there is an incoming internal call.

kIndicate a call is in progress.

l(Versatis F250 only)

Indicate that handsfree is being used.

xSteadily on when an alarm is set.

Flash when the alarm time set before reaches.

aIndicate that the keypad is locked.

gIndicate when there are received new Voice Message

Waiting (VMWI) not yet read.

Disappear when all the voice messages have been read.

(Network service dependent)

nIndicate that the ringer is switched off.

bIndicate when the battery is fully charged.

Whole icon flashes when the battery performs initial

charging.

Internal block icon flashes when the battery is in final

charging stage.

vIndicate when the battery needs charging.

Flash when low battery power level is detected.

[Indicate when more characters are existed before the text

currently displayed.

]Indicate when more characters are existed after the text

currently displayed.

sIndicate when new call is received.

Turn off when new call has been read.

fScroll up/down the menu items/Phonebook list/Redial list/

Call List.

2. PRECAUTIONS

The signal quality will depend on the location and environment of

the base and handset.

Position your away from sources Versatis F200/Versatis F250

of excessive heat (radiators, direct sunlight, etc.) and protect it

from vibrations and dust. Never allow your telephone to come

into contact with water or other liquids, or with aerosols. To

reduce the risk of interference and optimize reception, take

particular care not to install the base in the immediate vicinity of

windows, large metal objects, reinforced concrete, televisions,

music centres, VCR or DVD players, halogen lamps or heating

devices, fluorescent lighting, burglar alarms, microwave ovens,

computers, etc.

This telephone requires an electrical power supply in order to

function.

To clean your , use an antistatic Versatis F200/Versatis F250

cloth lightly moistened with water.

NB: Your Versatis F200/Versatis F250 is a DECT™* standard

appliance designed to receive and transmit telephone calls. It

is designed for connection to the public telecommunications

network.

3. INSTALLING YOUR PHONE

3.1. Installing and Charging the Batteries

1. Slide down to open the battery compartment cover.

2. Place the 2 supplied AAA rechargeable batteries as indicated.

Pay extra attention to direction of polarity.

3. Slide the battery compartment cover back.

4. Put the handset on the base and charge for 15 hours before

using the handset for the rst time. The handset will give a

beep when it is properly placed on the base or charger.

Notes:

1. Use only the supplied NiMH rechargeable batteries.

2. If the handset will not be used for a long time, disconnect and

remove the batteries to prevent possible leakage.

3.2. Connecting the Base Station

1. Plug one end of the telephone line cord into the telephone

jack on base bottom.

2. Plug the small end of power adapter into a power jack on

base bottom.

3. Connect the power supply plug to the base jack

horizontally, and route the power supply cord through

the slot.

4. Plug the large end of power adapter into a wall power outlet.

5. Plug the other end of the telephone line cord in to the

telephone jack or micro-lter.

6. Always use the cables provided in the box.

If you have broadband service,

a micro-filter (not included) is required.

3.3. Connecting the Charger(s) (for Duo/Trio models)

Plug the power adapter into mains socket.

If you have a Broadband line

If you connect your telephone to a line with a broadband

connection, you will need to insert a micro-filter between the

telephone and the telephone line, otherwise you may get

interference between the telephone and the broadband, which

could cause problems.

In a home with broadband, every telephone must have a micro-

filter connected, not just the one at the telephone point that your

modem is connected to. If you need more broadband micro-

filters, contact your broadband supplier.

www.atlinks.com

ATLINKS Europe

22 quai Gallieni

92150 Suresnes- France

The Manufacturer reserves the right to modify the specifications

of its products in order to make technical improvements or

comply with new regulations.

ALCATEL and ATLINKS are registered trademarks.

The Alcatel logo and Alcatel name are trademarks of Alcatel and

used under licence by ATLINKS.

F200/F200 Duo/Trio LA

F250/F250 Duo/Trio LA

A/W No.: 10000441 Rev.0 (EN)

Printed in China

9. TECHNICAL DETAILS

Free Field Range Up to 300 metres*

Indoor Range Up to 50 metres*

Handset Battery Life

(average values)

10 hours talk time**

100 hours standby**

Number of Handsets Up to 5

Intercom Mode Yes

Three-Way Conference

(1 outside correspondent +

2 internal correspondents)

Yes

Electrical Connection/Base

Mains Adaptor/Charger

Base main adaptor:

Input: 100-240 V/50-60 Hz/0.15 A

Output: 6 V DC/450 mA

Charger adaptor:

Input: 100-240 V/50-60 Hz/0.15 A

Output: 6 V DC/450 mA

Only use the adaptors supplied with

the telephone

Caution: The network voltage is

classified as a hazard by the criteria

of this standard.

Telephone Connection Appliance designed for

connection to a TNV3 class

(telecommunications network

voltage) analogue telephone line.

Batteries AAA – 1.2 V – 400 mA

Only use the batteries supplied with

the telephone.

Use any other type of battery

presents a risk of explosion.

Used batteries must be disposed

of in compliance with current

environmental protection

regulations.

Operating Temperature From 5°C to 40°C

* Values may vary according to environment.

** Depending on initial battery charge.

10. TROUBLESHOOTING

If you have difficulty with your phone, please try the suggestions

listed below.

As a general rule, if a problem occurs, remove the batteries

from all the handsets in your installation for about 1 minute,

then disconnect and reconnect the power supply to the base and

reinstall the handset batteries.

Problem Cause Solutions

No dialing

tone when

pressing

T key

a. The connection

cord of the base

station is not

plugged in.

b. The adapter cord

is not plugged in

correctly in the

base station.

c. The line is busy, as

another handset is

used.

d. Wrong connection

cord.

a. Check the

connections. Unplug

and plug back in the

mains. Check that the

telephone line cord

has been plugged into

the base station and

the phone socket.

b. Check the base

station plug and the

AC plug (remove and

plug-in).

c. Wait until the line is

unoccupied.

d. Use the original

connection cord.

"OUT OF

RANGE" is

displayed.

a. Base station out of

range.

b. Base station is

not connected to

mains.

a. Reduce the range.

b. Connect base station

to mains.

The call

does not

work.

Service not activated

or wrong operator.

Check your Subscription

with network.

No display. Empty battery. Recharge battery.

The store where you bought your telephone can also provide you

with information and after-sales support.

11. SAFETY

In the event of an electrical hazard, the mains adapter acts as

AC power isolating device. It should therefore, as a precaution,

be installed close to the appliance and be easily accessible. To

disconnect the device from the primary power source, the mains

adapter must be removed from the AC socket.

If the mains adapter fails, it must be replaced by an identical model.

If not connected to the mains power or if there is a mains power

failure, telephones that use cordless handsets will not work.

You will then be unable to make or receive calls in the event of

an emergency.

This is why we recommend that you also keep a conventional

telephone – one that doesn’t require a power supply – as a backup.

! Do not use your telephone to notify a gas leak when

standing in the vicinity of the leak.

It is recommended that you avoid using this device during

electrical storms.

Do not attempt to open the batteries, as they contain chemical

substances. In the event of leakage, avoid contact with the skin,

eyes, nose and mouth. In the event of contact, rinse the affected

part for about twenty minutes with running water and seek

urgent medical attention. Clean the product with absorbent paper

or a dry cloth and contact your reseller for replacement batteries.

12. ENVIRONMENT

This symbol means that your inoperative electronic

appliance must be collected separately and not mixed

with the household waste.

This appliance has been designed and manufactured

with high quality materials and components that can be recycled

and reused. Electrical and electronic appliances are liable to

contain parts that are necessary in order for the system to work

properly but which can become a health and environmental

hazard if they are not handled or disposed of in the proper way.

Consequently, please do not throw out your inoperative appliance

with the household waste.

If you are the owner of the appliance, you must deposit it at the

appropriate local collection point or leave it with the vendor when

buying a new appliance.

- If you are a professional user, please follow your supplier's

instructions.

- If the appliance is rented to you or left in your care, please

contact your service provider.

Keen to preserve the environment, ATLINKS has equipped

this appliance with a switching power supply, offering better

energy efficiency. The advantages include not only very low

electricity consumption, but also a more compact format than the

conventional power supply units used by the previous range.

The used batteries from your telephone (if it has batteries)

must be disposed of in compliance with current environmental

protection regulations. Comply with your local regulations.

Return your batteries to your reseller or dispose of them at an

approved recycling centre.

Help us protect the environment in which we live!

8. REGISTRATION

Your handset and base station is pre-registered. Up to five

handsets can be registered to a single base station.

If for some reason, the handset is not registered to the base

station (h flashes even when the handset is near the base station),

1. Press and hold A on the base station for about ve seconds,

the base station is entered into registration mode.

2. Press M and + -/ to select .REGISTRATION

3. Press M and you are requested to enter the 4-digit system

PIN (default PIN is 0000).

4. Enter the 4-digit system PIN.

5. Press M to conrm.

If the handset registration is successful, you will hear a

confirmation tone and the h will stop flashing. The handset will

automatically be allocated the next available handset number.

This handset number is shown in the handset display in standby

mode. If the handset registration is unsuccessful, the

h will still

flash.

7.2. Set the Ringer Volume

1. Press M and + -/ to select .HS SETTINGS

2. Press M and + -/ to select .RING SETUP

3. Press M and + -/ to select .RING VOLUME

4. Press M and + -/ to select the desired ringer volume (a

total of 6 ringer volume levels including ).VOLUME OFF

Note: The respective ringer volume will be played during your

selection.

If is selected, VOLUME OFF n icon will display.

5. Press M to conrm.

7.3. Adjust Earpiece and Handsfree (Versatis F250

Only) Volume

There are 5 levels ( to ) to choose from for VOLUME 1 VOLUME 5

each of earpiece and handsfree (Versatis F250 Only) volume.

During a call:

Press + -/ to select volume 1-5. The current setting is shown.

When you end the call, the setting will remain at the last selected

level.

7.4. Store Direct Memory Access Number

You can store three direct access numbers into digit KEY 1, KEY

2 and KEY 3, which will be convenient for you to dial to these

numbers directly.

1. Press M and + -/ to select .HS SETTINGS

2. Press M and + -/ to select .DIRECT MEM

3. Press M and + -/ to select any one from , KEY 1 KEY 2

and .KEY 3

4. Press M and then enter the number you would like to store,

or edit the number existed before.

5. Press M to conrm.

Note: Press and hold 1 2 3, or to call the stored number.

5.1. Add a New Phonebook Entry

In idle:

1. Press P to access the phonebook.

Press M + and /- to select main menu item PHONEBOOK

and then press M to access the phonebook.

2. Press M to select .ADD

3. Press M to enter the name.

4. Press M to enter the number.

5. Press M and +/- to select the desired ringtone for your

phonebook entry.

6. Press M to store the phonebook entry.

5.2. Call from the Phonebook

In idle:

1. Press P to access the phonebook.

Press M + and /- to select main menu item PHONEBOOK

and then press M to access the phonebook.

2. Press T or S (Versatis F250 Only) to dial out to the

selected phonebook entry.

6. CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed the Caller Line

Identification service with your telephone service provider. Your

phone can store up to 20 received calls with date/time information in

the Call List. The number will be shown on the LCD when the phone

is ringing. If the number matches with one of the entries in your

Private Phonebook, the caller’s name stored in the private phonebook

will be displayed alternatively with the number. The handset will ring

with the melody associated with that phonebook entry.

If the caller number is disabled to send caller information,

“ ” will display.WITHHELD

If the caller number is not provided, “ ” will display.OUT OF AREA

In standby, if three unanswered calls are received, “3 NEW

CALLS” will be displayed.

6.1. View the Call List

All received calls are saved in Call List with the latest call putting

at the top of the list. When the call list is full, the oldest call will

be replaced by a new call. The unanswered call which has not

been read is marked with a

s at the centre of the bottom line of

the display.

1. Press + to access the call list.

Press M + - and / to select .CALL LIST

2. Press + -/ to select the desired entry.

3. Press # to view the caller’s number if applicable.

6.2. Call from the Call List

In idle:

1. Press + to access the call list.

Press M + - and / to select .CALL LIST

2. Press T or S (Versatis F250 Only) to dial out to the

selected phonebook entry.

7. PHONE SETTINGS

7.1. Set the Ringer Melody for Internal/External Calls

1. Press M and + -/ to select .HS SETTINGS

2. Press M and + -/ to select .RING SETUP

3. Press M and + -/ to select or .INT RING EXT RING

4. Press M and + -/ to select the desired ringer melody from

the melody list.

Note: The respective ringer melody will be played while browsing

the melody list.

5. Press M to conrm.

4. USING YOUR PHONE

4.1. Make a Call

4.1.1. Preparatory Dialing

Enter the phone number and press or (Versatis F250 T S

Only) to dial the number. Press

C to clear the entry.

4.1.2. Direct Dialing

Press T S or (Versatis F250 Only) to take the line and enter

the phone number.

4.1.3. Dial from Direct Memory Keys

In idle or off hook mode, press and hold

1 2 3/ / to dial the

direct memory number. You have to store number to the related

key first. See section 7.4 for reference.

4.1.4. Call from the Redial List

Press E (Versatis F200 Only) or - (Versatis F250 Only) to access

the redial list and press

+/- to select the desired redial number.

Press T S or (Versatis F250 Only) to dial out to the selected

redial number.

4.2. Handset Speakerphone (Versatis F250 Only)

During a call, you can press to alternate between handsfree S

and normal handset use.

5. PRIVATE PHONEBOOK

Your phone can store up to 50 private phonebook entries

with names and numbers. Each phonebook entry can have a

maximum of 20 digits for the phone number and 12 characters

for the name. You can also select different ringtones for your

phonebook entries. Phonebook entries are stored alphabetically

by name.

Produktspezifikationen

Marke:	Alcatel
Kategorie:	Telefon
Modell:	Versatis F200 Duo
Anzahl der Farben des Displays:	Monochrom
Freisprecheinrichtung:	Nein
Anrufer-Identifikation:	Ja
Ladegerät:	Ja
Produktfarbe:	Blue,White
Akku-/Batterietyp:	AAA
Akku-/Batterietechnologie:	Nickel-Metallhydrid (NiMH)
Befestigungstyp:	Tisch/Bank
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Eingebautes Display:	Ja
Gleichstrom-Anschluss (DC):	Ja
Lautstärkeregler:	Digital
Betriebstemperatur:	5 - 40 °C
Telefonbuch Kapazität:	50 Eintragungen
Anrufbeantworter:	Nein
Telefonkonferenz:	Ja
Wahlwiederholung:	Ja
Display-Hintergrundbeleuchtung:	Ja
Typ:	DECT-Telefon
Anzahl Melodien:	5
Abmessungen des Mobilteils (BxTxH):	48 x 23 x 159 mm
Anzahl enthaltener Handsets:	2
Basisstation:	Ja
Gesprächszeit:	10 h
Bereitschaftszeit:	100 h
Anzahl unterstützter Akkus/Batterien:	2
VIP Gruppenfunktion:	Ja
Batterieladeanzeige:	Ja
Warnanzeige bei geringem Ladestand:	Ja
Farbe der Hintergrundbeleuchtung:	Blau
Drahtlose Verbindung:	Ja
Uhr mit Kalender:	Ja
Ruhemodus:	Ja
Dialerposition:	Mobilteil
Anruferlisten:	20
Anrug ohne Abheben:	Ja
Umfang der Wahlwiederholungsliste:	10
Navigation Taste:	Ja
Batteriekapazitätsanzeige:	Ja
Multi-Function Hörer:	5
Maximum Innenabstand:	50 m
Maximum Außenabstand:	300 m
Paginierung Funktion:	Ja
Ausdrückliches Vermitteln:	Ja
Integrierte Antenne:	Ja
Abmessungen Basis:	119 x 129 x 78 mm
Große Knöpfe:	Ja
Kontakte über das Mobilteil hinzufügen:	Ja