Alcatel Temporis IP Extension Module Bedienungsanleitung

Alcatel Telefon Temporis IP Extension Module

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Alcatel Temporis IP Extension Module (3 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
Introduction
Display
Icons Description
Supervised line is in idle mode (LED is steady green)
Supervised line is busy (LED is steady orange)
Supervision has failed (LED is off)
Key is configured as line key. Registration was successful
Supervised line is being called (LED is blinking orange)
Key is configured as line key. Registration has failed (LED is off)
Speed dial key
Key is configured as line key. Registration is on going (LED is blinking green)
Key is configured as line key. Line is in off hook state (LED is steady green)
Temporis IP Extension Module
QUICK START GUIDE
Temporis IP Extension Module expands your Temporis IP800 capability with up to 38 addressable keys per module. It
is not a standalone device, but it has to be used together with a Temporis IP800.
Up to 6 extension modules can be daisy-chained to Temporis IP800. An additional power adaptor is not required when
up to 2 extension modules are connected. If you wish to use more than 2 modules, one extra power adaptor is required.
Get in touch with your reseller to buy a power adaptor.
- improper connection or abnormal use of the Product, in particular together with incompatible accessories, as stipulated in the
user’s guide;
- a Product that has been opened, modified or fitted with unapproved replacement parts;
- removal of the serial number or defacement rendering the serial number illegible;
- normal wear and tear, including normal wear and tear of accessories, batteries and screens;
- non-compliance with technical and safety standards in force in the geographical area of utilization;
- Products having suffered an impact or a fall;
- damage caused by lightning, power surge, proximity to a source of heat or radiation, water damage, exposure to excessive
temperature, humidity or other environmental conditions or any other cause external to the Product;
- negligent or defective maintenance;
- damage caused by servicing, modification or repair performed by any person other than an authorized ATLINKS service
provider.
If the returned Product is not covered by the warranty, you will receive a repair estimate giving the processing cost and the
transport fees that will be charged if you wish the Product to be returned to you.
This warranty is applicable where the Product is lawfully purchased, in the United Kingdom .
All warranties other than the warranty set forth herein are expressly excluded. Nothing in this warranty shall exclude or limit
conditions or warranties implied by law including the statutory warranty.
ATLINKS shall:
(a) only be responsible to you for losses suffered by you that are a foreseeable consequence of a defect in the Product;
(b) not be responsible to you for losses that result from a defect in the Product which fall into the following categories:
(i) loss of income or revenue;
(ii) loss of profit;
(iii) loss of business;
(iv) loss of anticipated savings;
(v) loss of data;
(vi) any waste of time; or
(vii) downtime or loss of use;
However this clause shall not prevent claims for foreseeable loss of, or damage to, your physical property;
Nothing in this warranty excludes or limits in any way ATLINKS liability for:
(i) death or personal injury caused by our negligence;
(ii) fraud or fraudulent misrepresentation;
(iii) any breach of the obligations implied by section 12 of the Sale of Goods Act 1979 or section 2 of the Supply of Goods and
Services Act 1982;
(iv) defective products under the Consumer Protection Act 1987; or
(v) any other matter for which it would be illegal or unlawful for ATLINKS to exclude or attempt to exclude liability.
Notice of copyright and trademarks
Copyright © 2012 ATLINKS. All rights reserved. ATLINKS reserves the right to change the technical specifications of its
products without prior notice, so as to make technical improvements or respect new regulations.
Alcatel and Temporis are registered trademarks. Alcatel logo and Alcatel name are trademarks of Alcatel Lucent and
used under license by ATLINKS.
ATLINKS Europe, 22 quai Gallieni 92150 Suresnes France
Model : Temporis IP Extension Module
A/W No.: 10000516 Rev.0 (EN)
Printed in China
Feature key programming
Temporis IP Extension Module offers 20 keys. Phone numbers, service codes or features can be assigned to those
keys. A simple key press will dial memorized numbers or activate programmed features.
• Programming via phone interface
• make a long press on the required key until Temporis IP800 displays configuration page. Then configure the
extension module key according to your needs.
• Programming via web interface
• open a web browser on your computer. Enter IP address of your phone in the address bar.
• type default login and password (user/user for users and admin/admin for administrators).
• when you’re in the web interface, select , then . Configure selected keys according to your needsPhone EXT Key
In case you need more than 20 keys, note each button can store two different functions. Key 1 is used by default as a
switch button to toggle between List 1 and List 2. Each list is thus providing 19 keys for your customized functions,
and overall 38 programmable keys. List 1 addresses Key 1 to Key 20, and List 2 Key 21 to Key 40. For example: key
3 corresponds to Key 3 in List 1 and Key 23 in List 2. You can switch between them by pressing the switch key.
Note : for more details concerning feature assignments, please refer to Temporis IP800 Administrator’s guide.
How to configure a BLF key?
BLF feature allows you to monitor the status (idle, ringing, or busy) of other SIP accounts. The BLF key also works as
a speed dial key, if user presses it, he/she calls automatically the monitored number. If you press it when monitored
line is ringing, you will capture the call.
To configure BLF, make a long press on the required key until Temporis IP800 displays configuration page.
• Then, press to display BLF.
• Press to select the SIP account on which the BLF should work (in case you have several SIP accounts
activated) .
• Press and type the label that will be displayed on the extension module screen.
• Press and then enter the phone number which must be monitored.
• Press and enter the call capture code.
• Press Save key to confirm.
Note: not all servers support BLF and call capture. Please check with your service provider or system administrator.
Declaration of conformity for the European Community
ATLINKS declares that the Temporis IP Extension Module complies with the relevant basic requirements and
provisions of the European directive 1999/5/CE. You can download the declaration of conformity from the following
address: www.atlinks.com.
The CE logo shown on the products indicates that they are compliant with the basic requirements of all the applicable
directives.
How to configure a speed dial key?
Speed dial allows you to call a stored number with a simple key press.
To configure a speed dial key, make a long press on the required key until Temporis IP800 displays configuration page.
• Then press until Speed Dial is displayed.
• Press to select the SIP account to be used for dialing (in case you have several SIP accounts activated).
• Press and type the label that will be displayed on the extension module screen.
• Press and then enter phone number.
• Press Save key to confirm.
Declaration of conformity to the rule of the American Federal Communications Commission (FCC)
This equipment has been tested and declared compliant with the limitations relating to a class B digital device, in
accordance with Subsection J of Section 15 of the FCC rules.
These provisions aim to ensure reasonable protection against harmful interferences when the device is used in a
commercial environment. This equipment generates, uses and can emit radio energy and, if not installed in
accordance with the instructions of this manual, can cause interference of such a nature as to affect radio
communications. The use of this equipment in a residential area may cause harmful interferences to which the user is
responsible for correcting at his own expense.
Environment
This symbol means that your inoperative electronic appliance must be collected separately and not mixed
with the household waste.The European Union hasimplemented a specific collection and recycling system
for which poducers' are responsible.This appliance has been designed and manufactured with high quality
materials and components that can be recycled and reused.
Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work
properly but which can become a health and environmental hazard if they are not handled or disposed of in the
proper way. Consequently, please do not throw out your inoperative appliance with the household waste.
If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the
vendor when buying a new appliance.
(a)- If you are a professional user, please follow your supplier's instructions.
(b)- If the appliance is rented to you or left in your care, please contact your service provider.
Please help us protect the environment in which we live!
Warranty
Please read carefully the user’s guide included in this package.
Temporis IP Extension Module is certified as conforming to European technical standards, as evidenced by the CE Mark
affixed thereto.
The product you have just bought is a technological product, which must be handled with care.
UK legislation, including Sale of Goods Acts and regulations, imply certain conditions which may apply to the
product you have purchased from the retailer (statutory warranty). These include conditions relating to quality.
For information concerning the statutory warranty, please consult the retailer who sold the product to you (seller).
Without prejudice to any statutory warranty from which the product benefits, ATLINKS Europe whose registered office address
is at 22 quai Gallieni 92150 Suresnes France warrants that the product contained in this package complies with the technical
specifications set forth in the user’s guide, during a warranty period commencing on the date of purchase of an unused
Product, which shall be presumed to be the date appearing on the invoice or the receipt issued by the seller, upon which
appears the seller’s name and continuing for:
Twenty-four (24) months for the telephone, excluding consumables, accessories and batteries.
Together with any claim made under this warranty during the warranty period, the complete Product must be returned to the
seller as soon as the defect appears or is discovered, together with proof of purchase, consisting of an invoice or receipt
issued by the seller specifying the place of purchase and the serial number of the Product.
Any Product or Product part found, during the warranty period, to have a defect in design, materials or workmanship shall be
repaired or replaced, at no cost to you, by a product or part that is identical or at least equivalent in terms of function and
performance. If repair or replacement is not possible on a commercially reasonable basis, ATLINKS will refund the purchase
price of the Product or replace the Product by an equivalent product.
The repaired or replaced Product or part, which, may be new or refurbished, shall be under warranty for a period of ninety (90)
days from the date of repair or replacement, or until the end of the initial warranty period if that exceeds the said ninety (90)
days; the warranty period shall also be extended by any period exceeding six days between the date the defective Product is
delivered to the seller and the date that the repaired or replaced Product is placed at your disposition.
This warranty does not apply in case of:
- damage caused by installing or using the Product otherwise than in accordance with the instructions contained in the user’s
guide;

Produktspezifikationen

Marke: Alcatel
Kategorie: Telefon
Modell: Temporis IP Extension Module

Brauchst du Hilfe?

Wenn Sie Hilfe mit Alcatel Temporis IP Extension Module benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Telefon Alcatel

Alcatel

Alcatel Temporis 500 Bedienungsanleitung

29 September 2024
Alcatel

Alcatel Temporis 23 Bedienungsanleitung

28 September 2024
Alcatel

Alcatel F330 Voice Bedienungsanleitung

20 September 2024
Alcatel

Alcatel XL595B Voice Duo Bedienungsanleitung

14 September 2024
Alcatel

Alcatel F630 Bedienungsanleitung

6 September 2024
Alcatel

Alcatel F670 Bedienungsanleitung

6 September 2024
Alcatel

Alcatel E230 Bedienungsanleitung

6 September 2024
Alcatel

Alcatel ePure Premium Bedienungsanleitung

6 September 2024
Alcatel

Alcatel SD601 Bedienungsanleitung

4 September 2024
Alcatel

Alcatel SP2502G Bedienungsanleitung

4 September 2024

Bedienungsanleitung Telefon

Neueste Bedienungsanleitung für -Kategorien-

Gigaset

Gigaset SL370 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-7020 Bedienungsanleitung

15 Oktober 2024
Profoon

Profoon PDX-100 Bedienungsanleitung

14 Oktober 2024
Uniden

Uniden XS 1415 Bedienungsanleitung

13 Oktober 2024
Uniden

Uniden XDECT 6105BTU Bedienungsanleitung

11 Oktober 2024
OnePlus

OnePlus 9RT 5G Bedienungsanleitung

9 Oktober 2024
Profoon

Profoon PDX-1520 Bedienungsanleitung

7 Oktober 2024
MT Logic

MT Logic TE-5740MTWG Bedienungsanleitung

7 Oktober 2024
D-Link

D-Link DI-102 Bedienungsanleitung

6 Oktober 2024
Belgacom

Belgacom Specifics 100 Bedienungsanleitung

5 Oktober 2024