ADE Gravis-210504 Bedienungsanleitung
ADE
Schneidemaschine
Gravis-210504
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ADE Gravis-210504 (16 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
OPERATING INSTRUCTIONS
Gravity Slicer
Model GRAVIS 250
Gravis- -Rev004- - 210504 UM en
1 Gravis- -Rev004- -210504 UM en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
1.1 Introduction ............................................................................................................................ 2
1.2 Use ........................................................................................................................................ 2
1.3 Residual risks ........................................................................................................................ 3
2. START- 3UP.............................................................................................................................
2.1 Installation ............................................................................................................................. 3
2.2 Wiring .................................................................................................................................... 3
2.3 Mechanical safety devices ..................................................................................................... 4
2.4 Electrical safety devices 4 .........................................................................................................
2.5 Acceptance testing ................................................................................................................ 4
2.6 Safety precautions ................................................................................................................. 4
2.7 Operation ............................................................................................................................... 5
3. USING THE MACHINE .......................................................................................................... 5
3.1 Machine Overview ................................................................................................................. 5
3.2 Operating functions ................................................................................................................ 6
3.3 Switching on .......................................................................................................................... 6
3.4 Feeding the product ............................................................................................................... 6
3.5 Adjusting the slice thickness .................................................................................................. 6
4. CLEANING AND CARE ......................................................................................................... 6
4.1 Cleaning ................................................................................................................................ 6
4.2 SHARPENING OPERATIONS............................................................................................... 7
4.3 Lubricating ............................................................................................................................. 8
4.4 Disposal ................................................................................................................................. 8
5. TRAINING ............................................................................................................................. 9
6. WARRANTY .......................................................................................................................... 9
7. TECHNICAL DATA ................................................................................................................ 9
8. CE MARKING AND DECLARATION OF CONFORMITY ..................................................... 10
9. CIRCUIT DIAGRAM ............................................................................................................ 11
10. EXPLODED VIEW ............................................................................................................... 11
11. SPARE PARTS LISTS ......................................................................................................... 13
Gravis- -Rev004- - 2 210504 UM en
1. FOREWORD
This symbol means: “Observe operating instructions.” Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This manual has been written to comply with the Machinery Directive as amended.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is tted to assure maximum eciency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the instructions and explanations
contained in the manual.
Before starting up the slicer, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insucient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
1.1 Introduction
The slicers have been designed to comply with applicable safety standards. Consequently, all our
slicers are fitted with a plate featuring the “CE” mark attesting to the product's conformity with said
provisions.
The housing, product carriage, feed plate, and sickle guard are made of anodized aluminum. The
housing design enables easy cleaning. The blade is set in motion by an electric motor with a V-belt
drive, which has a noise level of <70 dB measured at a distance of 1 meter at a height of 1.60 meters.
The total vibration of the parts coming into contact with the user's hands and arms is <2.5 m/s².
1.2 Use
These gravity slicers are intended for slicing cooked and raw sausages, hot or cold meat, bread, and
various types of cheese. The machine is not suitable for slicing some types of hard cheese. The slice
thickness is adjustable from 0 to 13 mm. When slicing cheese, we recommend using a blade with
Teon coating at cheese temperatures between 7 and 10 °C.
Never use the slicer to slice frozen products, meats, or sausage products with
bones, fruits, vegetables, or non-food products.
Any attempt to slice such products or similar foods may cause severe damage to
the machine and render the warranty null and void.
The machine is suitable for about 60 catering sta members. The above gure is merely a
recommendation based on experience and may vary depending on the application. The maximum
duty cycle is 40% (24 minutes per hour). The electric motor must then be allowed sucient time to
cool down. Operating the machine continuously for shorter periods also shortens the cooling
intervals. The machine is equipped with thermal overload protection. When the machine's electric
motor gets overheated, it switches o automatically. If this occurs, switch the machine o
immediately. Allow sucient time for the motor to cool down before switching the machine back on.
Thermal overload protection merely serves as another safety measure and should never be thought
of as a time limit for the duty cycle in the daily operation.
The machine may only be used in its original condition and with original parts. It is strictly forbidden
to dismantle the safety devices. If you notice any signs of damage to the safety devices or if any
safety devices are not in place, shut down the machine immediately and contact ADE for repair or
replacement.
Produktspezifikationen
| Marke: | ADE |
| Kategorie: | Schneidemaschine |
| Modell: | Gravis-210504 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ADE Gravis-210504 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine ADE
5 September 2024
5 September 2024
5 September 2024
28 August 2024
15 August 2024
19 Juli 2024
13 Juni 2024
29 Mai 2024
2 Mai 2024
17 März 2024
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Clatronic
- Schneidemaschine Domo
- Schneidemaschine G3 Ferrari
- Schneidemaschine Coline
- Schneidemaschine Ernesto
- Schneidemaschine Tristar
- Schneidemaschine Genius
- Schneidemaschine SilverCrest
- Schneidemaschine Sunbeam
- Schneidemaschine Clas Ohlson
- Schneidemaschine Quigg
- Schneidemaschine Makita
- Schneidemaschine Beper
- Schneidemaschine Bestron
- Schneidemaschine Camry
- Schneidemaschine Princess
- Schneidemaschine Royal Catering
- Schneidemaschine Trisa
- Schneidemaschine Bosch
- Schneidemaschine Parkside
- Schneidemaschine Ambiano
- Schneidemaschine Arendo
- Schneidemaschine Siemens
- Schneidemaschine Bifinett
- Schneidemaschine Electrolux
- Schneidemaschine Fagor
- Schneidemaschine Gorenje
- Schneidemaschine Jata
- Schneidemaschine Proficook
- Schneidemaschine Rommelsbacher
- Schneidemaschine Sammic
- Schneidemaschine Severin
- Schneidemaschine Unold
- Schneidemaschine Bomann
- Schneidemaschine Gastroback
- Schneidemaschine H.Koenig
- Schneidemaschine Hendi
- Schneidemaschine Korona
- Schneidemaschine Melissa
- Schneidemaschine OK
- Schneidemaschine Russell Hobbs
- Schneidemaschine Switch On
- Schneidemaschine Tefal
- Schneidemaschine Vox
- Schneidemaschine Powerfix
- Schneidemaschine ECG
- Schneidemaschine Black And Decker
- Schneidemaschine Skil
- Schneidemaschine Blaupunkt
- Schneidemaschine Cuisinart
- Schneidemaschine Eldom
- Schneidemaschine Eta
- Schneidemaschine Fritel
- Schneidemaschine Graef
- Schneidemaschine Heinner
- Schneidemaschine Kenwood
- Schneidemaschine Krups
- Schneidemaschine Trebs
- Schneidemaschine Wilfa
- Schneidemaschine Festool
- Schneidemaschine Exquisit
- Schneidemaschine Bartscher
- Schneidemaschine MACH
- Schneidemaschine Philco
- Schneidemaschine Hikoki
- Schneidemaschine Hyundai
- Schneidemaschine Magimix
- Schneidemaschine Livoo
- Schneidemaschine Kinzo
- Schneidemaschine Perel
- Schneidemaschine Beem
- Schneidemaschine Mia
- Schneidemaschine Ritter
- Schneidemaschine Sencor
- Schneidemaschine Turmix
- Schneidemaschine Ariete
- Schneidemaschine Efbe-Schott
- Schneidemaschine Kalorik
- Schneidemaschine Rotel
- Schneidemaschine Saro
- Schneidemaschine Ufesa
- Schneidemaschine Dremel
- Schneidemaschine Westfalia
- Schneidemaschine De Buyer
- Schneidemaschine ICES
- Schneidemaschine Brother
- Schneidemaschine MPM
- Schneidemaschine Team
- Schneidemaschine Venga
- Schneidemaschine JAC
- Schneidemaschine Wabäma
- Schneidemaschine Brandson
- Schneidemaschine JML
- Schneidemaschine Waves
- Schneidemaschine Zelmer
- Schneidemaschine Esperanza
- Schneidemaschine Kogan
- Schneidemaschine Rösle
- Schneidemaschine Tescoma
- Schneidemaschine Powerplus
- Schneidemaschine FAC
- Schneidemaschine RGV
- Schneidemaschine Presto
- Schneidemaschine Ozito
- Schneidemaschine Gourmetmaxx
- Schneidemaschine Swan
- Schneidemaschine Orbegozo
- Schneidemaschine CaterChef
- Schneidemaschine Ridgid
- Schneidemaschine Hobart
- Schneidemaschine Domoclip
- Schneidemaschine Emga
- Schneidemaschine Enkho
- Schneidemaschine Gastronoma
- Schneidemaschine Magic Chef
- Schneidemaschine Oster
- Schneidemaschine OXO
- Schneidemaschine PowerTec Kitchen
- Schneidemaschine Thane
- Schneidemaschine Zgonc
- Schneidemaschine Louis Tellier
- Schneidemaschine Avantco
- Schneidemaschine Nevir
- Schneidemaschine Wolfcraft
- Schneidemaschine Globe
- Schneidemaschine Berkel
- Schneidemaschine Nesco
- Schneidemaschine Nutrichef
- Schneidemaschine Kleva
- Schneidemaschine GARDE
- Schneidemaschine Cigweld
- Schneidemaschine Riviera & Bar
- Schneidemaschine Backyard Pro Butcher Series
- Schneidemaschine Pro-Cut
- Schneidemaschine Jokari
- Schneidemaschine Makeblock
- Schneidemaschine Boska
- Schneidemaschine Khind
- Schneidemaschine Weston
- Schneidemaschine Maruyama
- Schneidemaschine Baker's Mark
- Schneidemaschine Bifinet
- Schneidemaschine Bron-Coucke
- Schneidemaschine Prince Castle
- Schneidemaschine Borner
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Princess Classic Multi Food Slicer 492977 Bedienungsanleitung
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
29 September 2024