ADE AUTOMATIC-XL Bedienungsanleitung
ADE
Schneidemaschine
AUTOMATIC-XL
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr ADE AUTOMATIC-XL (20 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
OPERATING INSTRUCTIONS
Slicer with automatic transmission
AUTOMATIC- XL
Automatic- - -Rev002-XL 231117 UM- en
1 Automatic- - -Rev002-XL 231117 UM-en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
2. INTENDED USE .................................................................................................................... 2
3. OVERVIEW ........................................................................................................................... 3
3.1 Machine ................................................................................................................................. 3
3.2 Control panel ......................................................................................................................... 4
4. START-UP AND SAFETY PRECAUTIONS .......................................................................... 4
4.1 Opening the packaging .......................................................................................................... 4
4.2 Installation ............................................................................................................................. 5
4.3 Wiring .................................................................................................................................... 5
4.4 Mechanical safety devices ..................................................................................................... 5
4.5 Acceptance testing ................................................................................................................ 6
5. OPERATING THE SLICER ................................................................................................... 6
5.1 Normal operation (manual operation) 6 .....................................................................................
5.2 Automatic operation ............................................................................................................... 7
5.3 Switching oî .......................................................................................................................... 8
5.4 Brieîy interrupting the automatic mode .................................................................................. 8
5.5 Counting function/inputting the number .................................................................................. 8
5.6 Setting the speed ................................................................................................................... 8
5.7 Setting the stroke length ........................................................................................................ 9
5.8 Using the machine ................................................................................................................. 9
6. CLEANING AND CARE ...................................................................................................... 10
6.1 Cleaning .............................................................................................................................. 10
6.2 Lubricating ........................................................................................................................... 11
7. SHARPENING THE BLADE ............................................................................................... 12
8. TRAINING ........................................................................................................................... 14
9. STORAGE AND TRANSPORTATION CONDITIONS ......................................................... 14
10. DISPOSAL .......................................................................................................................... 14
11. WARRANTY ........................................................................................................................ 14
12. TECHNICAL DATA ............................................................................................................. 14
13. DIAGRAMS ......................................................................................................................... 15
14. DECLARATION OF CONFORMITY .................................................................................... 16
Automatic- - -Rev002- - 2 XL 231117 UM en
1. FOREWORD
This symbol means: âObserve operating instructions.â Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This publication contains all the information necessary for the installation, operation, and
maintenance of the slicers.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is îtted to assure maximum eîciency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the instructions and explanations
contained in the manual.
Before starting up the slicer, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insuîcient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
The slicers have been designed to comply with applicable safety standards. Consequently, all our
slicers are fitted with a plate featuring the âCEâ mark attesting to the product's conformity with said
provisions.
2. INTENDED USE
These slicers have been manufactured to slice:
- cooked and raw charcuterie,
- warm and cold meats,
- bread and cheese,
- stoneless fruit and vegetables.
The machine is intended for continuous operation in commercial gastronomic applications. It can
slice thicknesses up to 15 mm.
The slicers must never be used for cutting frozen goods, charcuterie, and meat
on the bone or fruit with stones. Any attempt to slice said products or similar
foods may result in severe damage to the machine and shall cause the warranty
to become void.
Produktspezifikationen
| Marke: | ADE |
| Kategorie: | Schneidemaschine |
| Modell: | AUTOMATIC-XL |
Brauchst du Hilfe?
Wenn Sie Hilfe mit ADE AUTOMATIC-XL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine ADE
5 September 2024
5 September 2024
5 September 2024
28 August 2024
15 August 2024
19 Juli 2024
13 Juni 2024
29 Mai 2024
2 Mai 2024
17 MĂ€rz 2024
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Clatronic
- Schneidemaschine Domo
- Schneidemaschine G3 Ferrari
- Schneidemaschine Coline
- Schneidemaschine Ernesto
- Schneidemaschine Tristar
- Schneidemaschine Genius
- Schneidemaschine SilverCrest
- Schneidemaschine Sunbeam
- Schneidemaschine Clas Ohlson
- Schneidemaschine Quigg
- Schneidemaschine Makita
- Schneidemaschine Beper
- Schneidemaschine Bestron
- Schneidemaschine Camry
- Schneidemaschine Princess
- Schneidemaschine Royal Catering
- Schneidemaschine Trisa
- Schneidemaschine Bosch
- Schneidemaschine Parkside
- Schneidemaschine Ambiano
- Schneidemaschine Arendo
- Schneidemaschine Siemens
- Schneidemaschine Bifinett
- Schneidemaschine Electrolux
- Schneidemaschine Fagor
- Schneidemaschine Gorenje
- Schneidemaschine Jata
- Schneidemaschine Proficook
- Schneidemaschine Rommelsbacher
- Schneidemaschine Sammic
- Schneidemaschine Severin
- Schneidemaschine Unold
- Schneidemaschine Bomann
- Schneidemaschine Gastroback
- Schneidemaschine H.Koenig
- Schneidemaschine Hendi
- Schneidemaschine Korona
- Schneidemaschine Melissa
- Schneidemaschine OK
- Schneidemaschine Russell Hobbs
- Schneidemaschine Switch On
- Schneidemaschine Tefal
- Schneidemaschine Vox
- Schneidemaschine Powerfix
- Schneidemaschine ECG
- Schneidemaschine Black And Decker
- Schneidemaschine Skil
- Schneidemaschine Blaupunkt
- Schneidemaschine Cuisinart
- Schneidemaschine Eldom
- Schneidemaschine Eta
- Schneidemaschine Fritel
- Schneidemaschine Graef
- Schneidemaschine Heinner
- Schneidemaschine Kenwood
- Schneidemaschine Krups
- Schneidemaschine Trebs
- Schneidemaschine Wilfa
- Schneidemaschine Festool
- Schneidemaschine Exquisit
- Schneidemaschine Bartscher
- Schneidemaschine MACH
- Schneidemaschine Philco
- Schneidemaschine Hikoki
- Schneidemaschine Hyundai
- Schneidemaschine Magimix
- Schneidemaschine Livoo
- Schneidemaschine Kinzo
- Schneidemaschine Perel
- Schneidemaschine Beem
- Schneidemaschine Mia
- Schneidemaschine Ritter
- Schneidemaschine Sencor
- Schneidemaschine Turmix
- Schneidemaschine Ariete
- Schneidemaschine Efbe-Schott
- Schneidemaschine Kalorik
- Schneidemaschine Rotel
- Schneidemaschine Saro
- Schneidemaschine Ufesa
- Schneidemaschine Dremel
- Schneidemaschine Westfalia
- Schneidemaschine De Buyer
- Schneidemaschine ICES
- Schneidemaschine Brother
- Schneidemaschine MPM
- Schneidemaschine Team
- Schneidemaschine Venga
- Schneidemaschine JAC
- Schneidemaschine WabÀma
- Schneidemaschine Brandson
- Schneidemaschine JML
- Schneidemaschine Waves
- Schneidemaschine Zelmer
- Schneidemaschine Esperanza
- Schneidemaschine Kogan
- Schneidemaschine Rösle
- Schneidemaschine Tescoma
- Schneidemaschine Powerplus
- Schneidemaschine FAC
- Schneidemaschine RGV
- Schneidemaschine Presto
- Schneidemaschine Ozito
- Schneidemaschine Gourmetmaxx
- Schneidemaschine Swan
- Schneidemaschine Orbegozo
- Schneidemaschine CaterChef
- Schneidemaschine Ridgid
- Schneidemaschine Hobart
- Schneidemaschine Domoclip
- Schneidemaschine Emga
- Schneidemaschine Enkho
- Schneidemaschine Gastronoma
- Schneidemaschine Magic Chef
- Schneidemaschine Oster
- Schneidemaschine OXO
- Schneidemaschine PowerTec Kitchen
- Schneidemaschine Thane
- Schneidemaschine Zgonc
- Schneidemaschine Louis Tellier
- Schneidemaschine Avantco
- Schneidemaschine Nevir
- Schneidemaschine Wolfcraft
- Schneidemaschine Globe
- Schneidemaschine Berkel
- Schneidemaschine Nesco
- Schneidemaschine Nutrichef
- Schneidemaschine Kleva
- Schneidemaschine GARDE
- Schneidemaschine Cigweld
- Schneidemaschine Riviera & Bar
- Schneidemaschine Backyard Pro Butcher Series
- Schneidemaschine Pro-Cut
- Schneidemaschine Jokari
- Schneidemaschine Makeblock
- Schneidemaschine Boska
- Schneidemaschine Khind
- Schneidemaschine Weston
- Schneidemaschine Maruyama
- Schneidemaschine Baker's Mark
- Schneidemaschine Bifinet
- Schneidemaschine Bron-Coucke
- Schneidemaschine Prince Castle
- Schneidemaschine Borner
Neueste Bedienungsanleitung fĂŒr -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Princess Classic Multi Food Slicer 492977 Bedienungsanleitung
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
29 September 2024