Adder CCS-XB Bedienungsanleitung

Adder Nicht kategorisiert CCS-XB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adder CCS-XB (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

www.adder.com

CCS-XB

Quick Start

Self adhesive

rubber feet

CCS-XB controller

Four LED monitor indicators

Adder P/N: CCS-LED

(Also available separately when

more than four are required)

CATx link cable

Adder P/N: VSC46

What’s in the box

Connection overview inside

Full user guide available at www.adder.com

Part No. MAN-CCS-XB-QS • Release 2.1

The CCS-XB module works together with either the Adder CCS4-USB or CCS-PRO4 switches to provide LED

indicators for each of your video display screens. As the switch activates a screen, the CCS-XB module activates

the corresponding indicator (which can be attached to the screen) to provide extra clarity for the operator.

Checking the ﬁrmware version (CCS4-USB switches only)

When using the CCS-XB module with a CCS4-USB switch, it is important that the switch has rmware version

2.0 (or greater) installed. If in doubt you can check the rmware version of your CCS4-USB switch as follows:

1 With your CCS4-USB switch powered on and with a USB keyboard attached, press and hold the

COMPUTER button for roughly six seconds until the display shows .C

2 On the connected keyboard, press . The digits of the rmware F 1 Enter followed by and then press

version will be shown in sequence with a short pause between each. For instance,102 > > means that

the rmware version is and requires an upgrade. 1.02

3 Press E Enter and then press to return the CCS4-USB to normal operation.

If your CCS4-USB switch does require a rmware upgrade, please refer to the Performing upgrades

section of the CCS4-USB user guide.

Part numbers

CCS-XB Controller with CATx link cable and 4 LED monitor indicators

CCS-XB0 Controller with CATx link cable

CCS-XB8 Controller with CATx link cable and 8 LED monitor indicators

CCS-LED LED monitor indicator with 3m cable

CCS-LED-5M LED monitor indicator with 5m cable

Connection

overview

Steps to a successful installation

1 Use the supplied VSC46 CATx link cable ( ) to connect the CCS-XB unit to the OPTIONS port of your CCS4-USB or CCS-PRO4 switch.A

2 The next step depends on your switch type:

• - Use a standard patch cable ( ) to connect the network port of your CCS-PRO4 to the network port of your computer (either directly or CCS-PRO4 B

via a network switch - further information available in the CCS-PRO4 user guide), or

• - Use the VSC40 ash upgrade cable ( ) (supplied with your switch) to connect the CCS-XB module to the serial port of your computer.CCS4-USB C

3 Connect the supplied LED monitor indicators (D) to the rst four LED output ports on the CCS-XB module.

4 If your switch is not already powered on, apply power to it now. CCS4-USB switches need to be re-powered whenever a CCS-XB unit is re-attached;

this prompts them to locate the CCS-XB unit. CCS-PRO4 switches can sense a newly attached CCS-XB unit without the need for re-powering.

5 Download and run the Free-Flow conguration application from the Adder website (www.adder.com) and follow the instructions given in the latest

version of your CCS4-USB or CCS-PRO4 user guide (also available from the Adder website). The section ‘Conguring LED monitor indicators’ will show

you how to assign an indicator to each display.

Note: Once the LED monitor indicators have been programmed, you can remove the VSC40 ﬂash cable or network patch cable connections as these

are not required for operation. You will need to reconnect them, however, if you alter the LED assignments.

OPTIONS port

(CCS4-USB

and CCS-PRO4

switches)

Connect to a

vacant serial

port on your

computer

(CCS4-USB

switches only)

LED monitor indicators

(one per video display)

CATx link cable

Adder P/N: VSC46

(Included in CCS-XB kit)

Flash upgrade cable

Adder P/N: VSC40

(Included in CCS4-USB kit)

Network port

(CCS-PRO4

switches only)

To a network

switch or your

computer’s

network port

Produktspezifikationen

Marke:	Adder
Kategorie:	Nicht kategorisiert
Modell:	CCS-XB
Breite:	95 mm
Tiefe:	65 mm
Gewicht:	220 g
Produkttyp:	Matrix-Management-Einheit
Produktfarbe:	Schwarz
Höhe:	30 mm
Kompatibilität:	ADDER CCS4-USB