Adastra RMC120 Bedienungsanleitung

Adastra Empfänger RMC120

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra RMC120 (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 44 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
RM SERIES C120
Rackmount 100V mixer-amplifier with CD player
Item ref: 141UK 953.
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953.141UK User Manual
Introduction
Thank you for choosing the Adastra RMC120 rackmount 100V mixer-amplifier with CD player as part of your public address system.
This unit is designed to offer high quality, dependable service for mobile and installed systems. Please read this manual fully and follow
the instructions to achieve the best results with your new purchase and to avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
SAFETY NOTICE
1. Prior to use, read through this manual
2. Keep the manual in good condition
3. Pay attention to safety warnings
4. Observe all operating requirements
5. Do not use the device near water or wet areas
6. For cleaning, only use a lint-free, dry cloth
7. Install according to the specifications
8. Place away from heat sources or heating appliances
9. Use mains lead provided and avoid damage to cable or connectors
10. Unplug power from mains during stormy weather or if unused for long periods
11. In case of malfunction, water ingress or other damage, consult qualified service personnel
12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing
13. Please pay attention to warning symbols during transit and placement
14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel
15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection
16. Ensure correct operation of the mains switch
17. The DC input terminals must only be connected to a DC power supply which complies with SELV
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before
further use. Avoid impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet
• Use double insulated speaker wire with adequate current rating for 100V speaker connections
• Do not use 8Ω and 100V terminals at the same time
• Do not connect 8Ω speakers to the 100V terminal or 100V speakers to the 8Ω terminal
• Do not allow any foreign objects to enter the case or through the ventilation grilles or CD slot
Placement
• For rack-mounting, ensure adequate support for the weight of the amplifier
• Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier
• Ensure adequate access to controls and connections
Cleaning
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
953.141UK User Manual
Front panel
Rear panel
1.
CD feed slot
2.
USB port
3.
LCD display
4.
SD card slot
5.
Audio player controls
6.
MIC 1 volume control
7.
MIC/LINE 2 volume control
8.
MIC/LINE 3 volume control
9.
LINE 4 lume control vo
10.
LINE 5/CD volume control
11.
BASS EQ control
12.
TREBLE EQ control
13.
MASTER volume control
14.
POWER on/off switch
15.
Output level meter
16.
Mains voltage switch
17.
IEC mains inlet & fuse holder
18.
DC power terminals
19.
Speaker connection terminals
20.
LINE OUT connectors (RCA)
21.
LINE 5 input (RCA)
22.
LINE 4 input (RCA)
23.
MIC/LINE 3 input (6.3mm jack)
24.
MIC/LINE 2 input (6.3mm jack)
25.
DIP switches (see DIP switches section below)
26.
MIC 1 input (XLR)
27.
FM antenna connection

Produktspezifikationen

Marke: Adastra
Kategorie: Empfänger
Modell: RMC120

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adastra RMC120 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Adastra

Adastra

Adastra RS120 Bedienungsanleitung

15 August 2024
Adastra

Adastra UM30 Bedienungsanleitung

14 August 2024
Adastra

Adastra UA60 Bedienungsanleitung

11 August 2024
Adastra

Adastra IW60B Bedienungsanleitung

11 August 2024
Adastra

Adastra RM60 Bedienungsanleitung

11 August 2024
Adastra

Adastra A8 Bedienungsanleitung

11 August 2024
Adastra

Adastra STA40-WIFI Bedienungsanleitung

10 August 2024
Adastra

Adastra UA30 Bedienungsanleitung

10 August 2024
Adastra

Adastra UA90 Bedienungsanleitung

10 August 2024
Adastra

Adastra RS605 Bedienungsanleitung

10 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024