Adastra IW60B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra IW60B (4 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
IW6 0B
In-wall Bluetooth Amplifier
Item ref: 3. 3 95 09 UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953.093 User Manual UK
Introduction
Thank you for choosing the Adastra IW60B -wall amplifier for your discreet audio in
installation. This unit is designed to power wall or ceiling mounted speakers and receive
audio via Bluetooth. Please read this manual to gain the best results from your product and
avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If
liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service – –
personnel.
Safety
Check for correct mains voltage before connecting the power adaptor
Use only the power adaptor provided or an identical replacement
Placement
The IW60B can be installed in a ceiling or stud wall to power flush or surface mount speakers
The IW60B can also be surface mounted if necessary
Ensure adequate ventilation for cooling and keep away from combustible material or moisture
Ensure that the IW60B is within Bluetooth connection range of the sending device
Cleaning
Use a soft cloth with a neutral detergent to clean the housing as required
Use a vacuum cleaner to clear apertures and controls of any dust or debris build-ups
Do not use solvents for cleaning the unit
953.093 User Manual UK
Connections
Instal tion la
Locate the IW60B in the ceiling, wall or on the surface required. Tabs at each end of the
housing can be used for securing with screws.
Connect speakers using the supplied wires or equivalent by connecting “+” and “ ” on the -
speaker to the relevant connection on the IW60B. The speaker connections are via screw
terminals on a Euroblock, which can be removed for easy access whilst making connections.
Important: Ensure that the load is no lower than 4 for each output. Ω
(e.g. 2 x 4 pairs of 8 Ω speakers… or… 2 Ω speakers wired in parallel)
Ensure that the speakers can handle W from each output. 30
If the IW60B is to be used with a wired audio line level input (instead of Bluetooth), connect
this to the Euroblock terminals labelled “AUX IN” as shown on the Connections diagram
above.
Left positive connection (Lef t+) should be connected to “L”
Right positive connection (Right+) should be connected to “R
Both negative connections (Left- and Right-) should be connected to “G”
(G is the terminal for Ground connection common for both Left and Right signals)
Likewise, the Bluetooth or Aux input can be relayed to further IW60B or other amplifiers by
connecting a line level output from the Euroblock terminals labelled “AUX OUT”
AUX IN and AUX OUT connections should be made using shielded stereo audio cable and
not speaker cable.


Produktspezifikationen

Marke: Adastra
Kategorie: Empfänger
Modell: IW60B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adastra IW60B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Adastra

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-