Adastra A2 Bedienungsanleitung

Adastra Empfänger A2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Adastra A2 (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
A2
Rackmount Stereo Amplifier with Media Player
Item ref: 2953.40 UK
User Manual
Version 1 .0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953.402 User Manual UK
Introduction
Thank you for choosing the Adastra A2 rackmount stereo amplifier to power your public address system. This amplifier
is designed to offer high quality, dependable service for mobile and installed systems. Please read this manual fully and
follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit.
SAFETY NOTICE
1. Prior to use, read through this manual
2. Keep the manual in good condition
3. Pay attention to safety warnings
4. Observe all operating requirements
5. Do not use the device near water or wet areas
6. For cleaning, only use a lint-free, dry cloth
7. Install according to the specifications
8. Place away from heat sources or heating appliances
9. Use mains lead provided and avoid damage to cable or connectors
10. Unplug power from mains during stormy weather or if unused for long periods
11. In case of malfunction, water ingress or other damage, consult qualified service personnel
12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing
13. Please pay attention to warning symbols during transit and placement
14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel
15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection
16. Ensure correct operation of the mains switch
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before
further use. Avoid impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet
• It is recommended to use speaker wire with a minimum current rating of 6A per output.
• Do not allow any foreign objects to enter the case or through the ventilation grilles
Placement
• Keep out of direct sunlight and away from heat sources
• Keep away from damp or dusty environments
• For rack-mounting, use the rack ears provided and ensure adequate support for the weight of the amplifier
• Ensure adequate air-flow and do not cover cooling vents
• Ensure adequate access to controls and connections
Cleaning
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
953.402 User Manual UK
Front panel
Rear panel
1.
Power on/off switch
12.
Channel 1 output level control
2.
SD card slot
13.
Channel 2 output level control
3.
Media player display
14.
USB port
4.
3.5mm stereo A input ux
15.
Media player control panel
5.
A input volume control ux
16.
Mic 1 input 6.3mm jack
6.
Media player volume control
17.
Mic 2 input 6.3mm jack
7.
Line 1 input volume control
18.
Mic 1 volume control
8.
Line 2 input volume control
19.
Mic 2 volume control
9.
Stereo input selector
20.
Talkover on/off button
10.
Bass EQ control
21.
Output Signal & Clip indicators
11.
Treble EQ control
22.
Ventilation grille (do not obstruct airflow)
27.
Line output
23.
FM antenna connection (F type)
28.
Channel 1 speaker output +/- 4mm binding posts
24.
Line 2 input (L+R RCA)
29.
Channel 2 speaker output +/- 4mm binding posts
25.
Line 1 input (L+R 6.3mm jack)
30.
IEC mains inlet & fuse holder
26.
Line 1 input (L+R RCA)

Produktspezifikationen

Marke: Adastra
Kategorie: Empfänger
Modell: A2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Adastra A2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Adastra

Adastra

Adastra RS120 Bedienungsanleitung

15 August 2024
Adastra

Adastra UM30 Bedienungsanleitung

14 August 2024
Adastra

Adastra UA60 Bedienungsanleitung

11 August 2024
Adastra

Adastra IW60B Bedienungsanleitung

11 August 2024
Adastra

Adastra RM60 Bedienungsanleitung

11 August 2024
Adastra

Adastra A8 Bedienungsanleitung

11 August 2024
Adastra

Adastra STA40-WIFI Bedienungsanleitung

10 August 2024
Adastra

Adastra UA30 Bedienungsanleitung

10 August 2024
Adastra

Adastra UA90 Bedienungsanleitung

10 August 2024
Adastra

Adastra RS605 Bedienungsanleitung

10 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024