Accucold PTHC65GUC Bedienungsanleitung
Accucold
BordsteinwÀrmer
PTHC65GUC
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Accucold PTHC65GUC (22 Seiten) in der Kategorie BordsteinwĂ€rmer. Dieser Bedienungsanleitung war fĂŒr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/22
BLANKET WARMER
MODELS:
PTHC65G Series
PTHC125G Series
PTHC155G Series
PTHC65GUC Series
User Manual
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS
2
TABLE OF CONTENTS
Important Safeguards 3
Installation 4-5
Before Using the Warming Cabinet 4
4 Installing your Appliance
5 Reversing the Door Swing
5 Installing the Door Handle
Operation 6
Loading the Warming Cabinet 6
6 Turning on the Warming Cabinet
o 6 Turning ff the Warming Cabinet
6 Reducing the Set Point Temperature
Cleaning and Maintenance 7
7 Cleaning
7 Extended Downtime
7 Moving your Appliance
7 Energy Saving Tips
7 Preventive Maintenance
Troubleshooting 8
Wiring Diagram 9
Limited Warranty 10
French Translation of this Manual - 11 20
Write model and serial numbers here/ Ăcrivez
les numéros de modÚle et de série ici:
_______________________________________
FELIX STORCH, INC.
An ISO 9001:2015 Registered
Company
770 Garrison Avenue
Bronx, New York 10474
3
IMPORTANT SAFEGUARDS
Your safety and the safety of others are very important to us. We have provided several important
safety messages in this manual. Read all safety messages and always obey them when operating
this appliance. Serious injury or even death may result if you do not follow these instructions.
To reduce the risk of fire, electric shock, or
injury when using this appliance, follow
these basic precautions:
î Use two or more people to move and install this appliance.
î Plug into a grounded 3-prong outlet.
î Do not remove the grounding prong, or use a 3/2 adapter.
î -For free standing installation, allow at least 5 inches (127mm) of space between the back, top,
and sides of the unit. For recessed or built-in installation (units with âUCâ in the model number),
leave an air gap of at least 1 inch (25.4 mm) on each side and top and 2 inches (51mm) at the
rear.
î Use care not to plug into outlets controlled by wall switches.
î Disconnect power before servicing.
î After service, replace all parts and panels before operating.
î Do not store or use gasoline or other flammable items in the area of this or any appliance, as the
fumes can create a fire hazard or explosion.
î Use nonflammable cleaners.
î Never unplug your appliance by pulling on the power cord. Always grip the plug firmly and pull
straight out from the socket.
î Be careful not to roll over or damage the cord when moving the appliance.
î Do not pinch, knot, or bend the power cord in any manner.
î If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid a hazard.
î Unplug the appliance before making repairs or cleaning.
î To prevent injury or damage, any repairs or adjustments should be done by only a qualified
technician. In particular, do not attempt to remove the control panel, since this could result in
electric shock.
î This appliance is not meant to exceed a temperature of 140°F (60°C). Do not raise the set
temperature in an attempt to increase the rate of heating. Allow several hours for the content of
the cabinet to reach the desired temperature.
Produktspezifikationen
| Marke: | Accucold |
| Kategorie: | BordsteinwÀrmer |
| Modell: | PTHC65GUC |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Accucold PTHC65GUC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung BordsteinwÀrmer Accucold
29 September 2024
29 September 2024
Bedienungsanleitung BordsteinwÀrmer
- BordsteinwÀrmer Domo
- BordsteinwÀrmer Emerio
- BordsteinwÀrmer Gaggenau
- BordsteinwÀrmer Bartscher
- BordsteinwÀrmer Suntec
- BordsteinwÀrmer CaterChef
- BordsteinwÀrmer Emga
Neueste Bedienungsanleitung fĂŒr -Kategorien-
28 August 2024
15 August 2024
10 August 2024
7 August 2024
4 August 2024
1 August 2024
30 Juli 2024
29 Juli 2024
19 Juli 2024
13 Juli 2024