Zoom TAC-2R Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zoom TAC-2R (16 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
© 2014 ZOOM CORPORATION
Copying or reprinting this manual in part or in whole without permission is prohibited.
Operation Manual
2
Introduction
Introduction …………………………… 2
Usage and Safety Precautions …… 3
Part Names ………………………………4
Installing the Driver ………………… 6
Connecting with a Computer ………… 7
Recording …………………………… 8
Playback ……………………………… 11
Connecting MIDI Devices ……… 13
Restoring Factory Default Settings 13
Troubleshooting ……………………… 14
Specifications ……………………… 15
Contents
Introduction
2-in/2-out Thunderbolt™ audio converter
The audio converter uses Thunderbolt, the latest generation of high-speed interface
technology. With this, we have realized a system with low latency that was not possible using USB 2.0.
Since it also supports recording and playback at up to 24-bit/192kHz, it can also be used for the playback
of high-resolution sound sources delivered with superior audio quality over the Internet.
Attention to audio performance
The entire system reproduces the original audio faithfully. An asynchronous transfer system
that is not impacted by computer jitter is used along with the latest AD/DA converter, which
supports 192kHz.
Built-in high-performance mic preamps
The high-performance mic preamps are based on those developed for our H Series. Each
input also supports Hi-Z connections. The gain can be raised by up to 60 dB, and +48V
phantom power can be supplied.
dedicated mixer application
Use this application to make internal mixer and monitoring effect settings. For details about
, see the ZOOM website (http://www.zoom.co.jp/downloads/).
3
Usage and Safety Precautions
Usage and Safety Precautions
SAFETY PRECAUTIONS
In this operation manual, symbols are used to highlight warnings
and ca utions that you must read to pre vent accidents. The
meanings of these symbols are as follows.
Warning
Something that could cause serious injury or death
Caution
Something that could cause injury or damage to the
equipment
Other symbols used
An action that is mandatory
An action that is prohibited
Warnings
Alterations
Do not open the case or modify the product.
Precautions
Product handling
Do not drop, bump or apply excessive force to the unit.
Be careful not to allow foreign objects or liquids enter the unit.
Operating environment
Do not use in extremely high or low temperatures.
Do not use near heaters, stoves and other heat sources.
Do not use in very high humidity or where it could be splashed by water.
Do not use in places with frequent vibrations.
Do not use in places with much dust or sand.
Connection cables and input/output jacks
Always turn the power OFF for all e quipment be fore connecting any
cables.
Always di sconnect all connection cables and the AC ada pter before
moving the unit.
Volume
Do not use at a loud volume for a long time.
Usage Precautions
Interference with other electrical equipment
In consideration of safety, the has been designed to minimize its
emission of electromagnetic waves and to suppress interference from external
electromagnetic waves. However, equipment that is very susceptible to interference
or that emits powerful electromagnetic waves could result in interference if placed
nearby. If this occurs, place the and the other device farther apart. With
any type of electronic device that uses digital control, including the ,
electromagnetic interference could cause malfunction, corrupt or destroy data and
result in other unexpected trouble. Always use caution.
Cleaning
Use a soft cloth to clean the exterior of the unit if it becomes dirty. If necessary, use
a damp cloth that has been wrung out well. Never use abrasive cleansers, wax or
solvents such as alcohol, benzene or paint thinner.
Temperature considerations
Continuous use of this interface for long periods of time, for example, might cause it
to become warm. This is normal as long as it does not become too hot to touch.
Breakdown and malfunction
If the should malfunction or operate abnormally, disconnect it
immediately. Then, contact the retailer where you purchased it or Zoom support and
provide the following information: product model, serial number and details of the
symptoms of malfunction or abnormal operation, as well as your name, address and
telephone number.
Copyrights
• Macintosh and Mac OS are trademarks or registered trademarks of Apple Inc.
Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S.
and/or other countries.
MIDI is a registered trademark of Association of Musical Electronics Industry (AMEI).
All other product names, trademarks and company names in this document are
the property of their respective owners.
Note: All trademarks and registered trademarks in this document are for
identification purposes only and are not intended to infringe on the copyrights of
their respective owners.
Recording for any purpose other than personal use from copyrighted sources,
including CDs, records, tapes, live performances, video works and broadcasts,
without permission of the copyright holder is prohibited by law.
Zoom Corporation will not assume any responsibility related to infringements of
copyrights.


Produktspezifikationen

Marke: Zoom
Kategorie: Audio/Video-Konverter
Modell: TAC-2R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zoom TAC-2R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Audio/Video-Konverter Zoom

Bedienungsanleitung Audio/Video-Konverter

Neueste Bedienungsanleitung für -Kategorien-