Zodiac AquaLink M8 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zodiac AquaLink M8 (44 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
H0665000 REV B
INSTALLATION MANUAL
FOR YOUR SAFETY - This product must be installed and serviced by a licensed electrician in accordance
with the latest, enforced version of AS/NZS 3000 and any other applicable local installation codes.
Before installing this product, read and follow all warning notices and instructions that accompany this
product. Failure to follow warning notices and instructions may result in property damage, personal
injury, or death. Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can cause serious
injury, property damage, or death.
WARNING
AquaLink® M8
For One Touch and PDA control systems
Page 2 AquaLink® M8 | Installation Manual
DATE OF INSTALLATION
INSTALLER INFORMATION
INITIAL PRESSURE GAUGE READING (WITH CLEAN FILTER)
PUMP MODEL HORSEPOWER
FILTER MODEL
CONTROL PANEL MODEL SERIAL NUMBER
NOTES:
EQUIPMENT INFORMATION RECORD
Page 3
AquaLink® M8 | Installation Manual
Table of Contents
Section 1. Important Safety Instructions 4 .......
Section 2. System Overview 6 ...........................
2.1 Package Contents 6 .........................................................
2.2 Electrical Specifications.................................................6
2.3 Materials and Tools .......................................................6
2.4 Basic Plumbing..............................................................7
Section 3. Installation .................................... 11
3.1 Power Center Mounting............................................... 11
3.2 High Voltage Wiring ..................................................... 11
3.3 Heater Connection 13 ......................................................
3.4 Temperature Sensors 13 ..................................................
3.5 Jandy Valve Actuators ................................................. 14
3.6 OneTouchâ„¢ Control Panel..........................................17
Section 4. System Startup............................. 19
4.1 OneTouch Programming 19 .............................................
4.2 OneTouch Reset and Display Messages 21 ....................
4.3 Variable Speed Pump Menu 21 ........................................
4.4 OneTouchâ„¢ Systems Defaults and General Modes 24 ..
4.5 PDA Installation 24 ...........................................................
4.6 PDA Handheld Remote System Defaults and General
Modes..........................................................................26
4.7 PDA Handheld Remote On/Off Menu 27 ..........................
4.8 Pool Heat.....................................................................28
4.9 Spa Heat 28 .....................................................................
4.10 Solar Heat 29 ...................................................................
4.11 Auxilary Equipment 29 .....................................................
4.12 Heat Pump 29 ..................................................................
4.13 Set Light Colors 30 ...........................................................
4.14 Variable Speed Pump 31 ..................................................
Section 5. PDA Handheld Remote Menu
Flow Diagrams 32 .............................
Section 6. OneTouchâ„¢ Menu
Flow Diagrams 33 .............................
Section 7. Troubleshooting 34 ...........................
Section 8. Power Center Wiring Diagram for
Combos and Onlys 35 ......................
Section 9. Power Center PCB DIP Switch
Settings 36 .........................................
9.1 DIP Switch Functions 36 ..................................................
9.2 DIP Switch Settings for Pool and Spa Combination 37 ....
9.3 DIP Switch Settings for Pool or Spa Only 38 ...................
9.4 DIP Switch Settings for Heat Pump Installation 39 ..........
Section 10. General, Water Feature and Light
Aux Labels 40 ....................................


Produktspezifikationen

Marke: Zodiac
Kategorie: Nicht kategorisiert
Modell: AquaLink M8

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zodiac AquaLink M8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Zodiac

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-