ZKTeco SBT1011S Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZKTeco SBT1011S (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Swing Barrier Turnstile User Manual
Applicable Models: SBT1000S
Version: 1.2 Date: May. 2018
1
Chapter 1 Product Introduction
1.1 Model number and access control
Access
Model NO C3-200 with two
KR800 reader inBIO260 with two FR1500/ID reader
SBT1000S √
SBT1011S √
SBT1022S √
1.2 Chassis and dimensions
SBT1000S , series with stainless steel housing, provide simple and beautiful design with anti-corrosion.
It is provide orderly and civilized passage to people while eliminating illegal personnel access. In case
of emergency, it ensures timely evacuation channel smoothly and convenient personnel.
SBT1 S000 ’s appearance and dimensions are as shown in Figure 1- : 2A
Figure1- 2A
1.3 Mechanical system
The mechanical system of a swing barrier turnstile includes the chassis and the core component. The
chassis is a carrier where , the sensor, and the lock are installed. The core component the reader
mainly consists of the motor, the frame and the swing arm.
1.4 Electronic control system
The electronic control system of a swing barrier turnstile is mainly composed of the reader, the
control panel, the access controller, the sensor and the transformer.
2
Reader: The reader reads the data in the card and sends it to the controller.
Control panel: The control panel is the system’s control center that receives signals from the access
controller, performs logical judgment and processing of these signals, and sends executive
commands to the electric motor.
IR sensor: -anti pinch function.
1.5 The working principle of swing barrier turnstile system
1) After powered on, the system performs self-check. If no failure is detected, the machine starts to
operate normally. If a failure is detected, the system displays related messages on the LCD
display screen so that the user can have a quick knowledge of and solve the problem.
2) When the reader detects a valid card, the buzzer will give a nice audible prompt to the
pedestrian, indicating that the card is being read successfully. And then, the reader sends signals
to the access controller to request permission to pass through the passage. If the signal is legal,
the access controller will send the open signal to the master control panel.
3) After receiving the signal from the access controller, the control panel sends valid control signals
to the electric motor and opens the barrier.
1.6 Product related parameters
Dimension(mm) SBT1000S: L=200, W=185, H=1100
Input voltage AC100 120V/200- -
240V,50- 60Hz Output voltage DC 24V
Input control signal Switching signal Relative humidity %- % 20 93
temperature - - 28℃60℃Pass speed : Maximum 30/minute
Infrared sensor 1 Working
environment I ndoor/Outdoor(If shelter)
Air switch
Access controller
IR Sensor
24V power supply
Motor
Encoder
Control board
Clutch
Reader


Produktspezifikationen

Marke: ZKTeco
Kategorie: Nicht kategorisiert
Modell: SBT1011S

Brauchst du Hilfe?

Wenn Sie Hilfe mit ZKTeco SBT1011S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ZKTeco

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-