ZKTeco OP1022 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZKTeco OP1022 (13 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
User Manual
OP1000 series
A licable M els: OP1000/1200, 1011/1211, 1022/1222 pp od
Version: 1.0
Date: December 2018
Content
1. Product Introduction......................................................................................................................................................... 1
1.1 Model number and access control ................................................................................................................... 1
1.2 Chassis design and dimensions .......................................................................................................................... 1
1.3 Function features ......................................................................................................................................................... 2
1.4 Electronic control system ....................................................................................................................................... 2
1.5 Specifications ................................................................................................................................................................. 3
2. Electrical test before installation ............................................................................................................................... 4
3. Electrical and civil installation ...................................................................................................................................... 4
3.1 Equipment installation condition and position ........................................................................................ 4
3.2 Cables installation ....................................................................................................................................................... 5
3.3 Equipment installation and fixing ..................................................................................................................... 6
3.4 Set up a warning line ................................................................................................................................................ 6
4. Equipment wiring and debugging ......................................................................................................................... 7
4.1 Internal wiring diagram ........................................................................................................................................... 7
4.2 Master and slave wiring diagram ....................................................................................................................... 7
5. Menu Introduction ............................................................................................................................................................ 8
5.1 Function introduction .............................................................................................................................................. 8
5.2 Menu introduction ..................................................................................................................................................... 8
5.3 Operation and instruction of menu .............................................................................................................. 10
6. Product Maintenance .................................................................................................................................................... 12
6.1 Chassis maintenance .............................................................................................................................................. 12
6.2 Power maintenance ................................................................................................................................................ 12
2 series OP1000 User Manual
1.3 Function features
1. It offers allowed to clear direction indicating whether it is walk through the device with intuitive
LED light.
2. Anti-trailing function: the system will automatically trigger the alarm when , for instance, it detects
a . person closely following the person in front with the intention to pass without card swiping
The alarm will be raised until the pedestrian exits the passage; Rebr . ush valid CARDS to allow pass
3. There are a variety of working modes available for two way traffic. Infrared alarm or the main -
board release signal (need for additional access control system, access control, fingerprint, etc.)
can be set on the main board menu.
4. It has the function of canceling the passageway permission: when a person does not pass
through the device within a specified time after receiving the release signal, the system will
automatically cancel the passageway permission. You may set the time duration on the main
board menu.
5. It has function of the . nfire control free passage When there is a fire, the trigger channel is ormal
o , there . pen and will not be alarm
6. It has the liquid crystal display function and can describe the channel operation in intuitive words.
1.4 Electronic control system
The electronic control system of the OP1000 series is mainly composed of the reader, the master
control panel, the access controller, the infrared sensor, the direction indicator and the alarm.
Reader: The reader reads the data in the card and sends it to the controller.
Access control panel: Receive the information collected by the card reader, make judgment, transmit
the control brake machineling signal, and control the switch of the .
Master control panel: The master control panel is the system’s control c that receives signals enter
from the reader and the photoelectric switch. It performs logical judgment and processing of such
signals, and sends executive commands to the direction indicator, the electric motor and the alarm.
Infrared sensor: It detects the position of a pedestrian, and triggers alarm warning when illegal
behaviours occur.
Direction indicator: This indicator displays the current status of the sign at the lane, and directs the
pedestrian to pass through the lane in a safe and orderly manner.
Alarm: The alarm gives an alerting sound when the system detects any unauthorized entry.

Produktspezifikationen

Marke: ZKTeco
Kategorie: Nicht kategorisiert
Modell: OP1022
Breite: 180 mm
Tiefe: 500 mm
Gewicht: 38000 g
Produktfarbe: Edelstahl
Höhe: 1000 mm
AC Eingangsspannung: 100 - 120, 200 - 240 V
Betriebstemperatur: -28 - 60 °C
Relative Luftfeuchtigkeit in Betrieb: 5 - 80 %
Verpackungsbreite: 220 mm
Verpackungstiefe: 600 mm
Verpackungshöhe: 1100 mm
Paketgewicht: 48000 g
Gehäusematerial: Edelstahl
Rahmenmaterial: Metall
Für die Nutzung im Innenbereich geeignet: Ja
Mittelzyklen zwischen Fehler (MCBF): 2000000
Für die Nutzung im Außenbereich geeignet: Ja
Barrierematerial: Edelstahl
Durchlaufgeschwindigkeit (Personen pro Minute): 30 Person(en)

Brauchst du Hilfe?

Wenn Sie Hilfe mit ZKTeco OP1022 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert ZKTeco

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-