Zippy HP2-6460P Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zippy HP2-6460P (17 Seiten) in der Kategorie Computeradapter. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/17
User Manual for Models HG2, HP2, PSM and PSL. Version 1.0
Page 1/17
User Manual
Product Type:
Switching Power Supply
Model Name:
HG2, HP2, PSM, PSL
June 18, 2003
Version 1.0
P/N ???
User Manual for Models HG2, HP2, PSM and PSL. Version 1.0
Page 2/17
Table of Contents
Safety and Warnings ............................................................................3
Product and Accessories.......................................................................4
Pin Assignment ....................................................................................5
Specification…………………………………………………………..8
Operational Procedures ......................................................................12
Troubleshooting & Maintenance........................................................16
Technical Support ..............................................................................17
User Manual for Models HG2, HP2, PSM and PSL. Version 1.0
Page 3/17
Safety and Warnings
IMPORTANT INFORMATION ON
SAFETY AND PROPER OPERATION OF THE POWER SUPPLY.
<< Read the information carefully before using it. >>
1. Do not attempt to take apart the power supply. There are hazardous voltages inside.
2. Do not add or remove any components from the power supply. Warranty void by doing so.
3. Only authorized technician or service center is allowed to open the power supply for product
services.
4. Never alter the power supply cord or plug. Improper modification can result in severe electrical
shock.
5. Do not expose power supply to high moisture, very dusty or extreme temperature environment.
6. Connect power supply only to designated power sources. Do not place any other materials into
the inlet of the power supply other than the power cord.
7. Do not plug or unplug the power cord with wet hands.
8. To avoid power cord damage, remove the power cord from the wall outlet by grabbing the plug
instead of the cord.
9. Make sure the power cord is properly routed so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
10. To avoid electrical shock, unplug the unit from the power source before attempting any cleaning.
Note1: For safety purposes, power cord must comply with the requirements of the National Safety Code.
Note2: All relevant registered trademarks are strictly the property of their respective companies.
Note3: No further notice will be given for any revision of the product, either modification or a newer
version.


Produktspezifikationen

Marke: Zippy
Kategorie: Computeradapter
Modell: HP2-6460P
Produktfarbe: Silber
Stecker: WTX
Betriebstemperatur: 0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb: 20 - 95 %
Zertifizierung: FCC CLASS B, CISPR22 CLASS B, CB, CCC, CE, CUL, FCC, TUV, UL
Temperaturbereich bei Lagerung: -20 - 70 °C
Mittlere Betriebsdauer zwischen Ausfällen (MTBF): 98302 h
Abmessungen (BxTxH): 140 x 150 x 86 mm
ATX Stromstecker (24-pol.): Ja
Eingangsstrom: 32 A
Sicherheit: UL 1950, CSA 22.2 NO/ 950, TUV IEC 950
Lüfterdurchmesser: 80 mm
Gesamtleistung: 460 W
Effizienz: 85 %
Anzahl SATA Stromstecker: 1
CPU Stecker (4+4 pin): Ja
Stromversorgungseinheit (PSU) Formfaktor: ATX
EPS Stromstecker (8-pin): Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zippy HP2-6460P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten