Zibro DONATA 161 IDRO Bedienungsanleitung

Zibro Herd DONATA 161 IDRO

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zibro DONATA 161 IDRO (62 Seiten) in der Kategorie Herd. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/62
GB
3
Dear Customer,
Congratulations on your purchasing an pellet boiler stove! We would like to remind you that pellet boiler stoves are the
most innovative heating solution generated by the most advanced technology, characterised by high-quality manufactu-
ring as well as a simple and elegant design. Ideal for any type of room, these products contribute to comfort thanks to the
cosy heat that only flames can radiate.
This manual will help you use your pellet boiler stove properly. Therefore, read it carefully and thoroughly before using the unit.
Stoves are fuelled only by wood pellets, up to 6mm in diameter. They are fitted with an exchanger that allows reaching a heat
yield of approx. 90%.
Pellet boiler stoves are fitted with a timer-thermostat that ensures an autonomous management of the stove as it can be pro-
grammed to turn on and off up to 4 times per week. Pellet boiler stoves take the heat to the radiators in the heating system,
with a thermal power that is adjusted according to the space to be heated: just set the heating system water temperature
manually. Recommended temperature: between 60° and 75°.
Pellet boiler stoves are fitted with cross-flow fans for hot air distribution which distributes heat through a forced-air system in
the room where the stove is installed.
Thanks to an optional kit, these stoves also produce continuous domestic hot water healthily, safely and automatically, wi-
thout the need for water storing.
Pellet boiler stoves have been equipped with highly advanced automatic devices and control and safety systems that ensure
efficient and practical operation.
Installation and maintenance operations should be carried out by qualified personnel, in compliance with the laws in force
and according to the indications specified by the Manufacturer.
This use and maintenance manual is an integral part of the product.
Before using, installing or servicing the product, read the indications contained in this manual carefully.
This pellet boiler stove should only be used for the intended use it has been designed for. Therefore, the user shall be
responsible for any damage to people, animals or things resulting from misuse of the product.
Installation should be carried out by qualified personnel, who will be fully responsible for installing the product
and ensuring its proper operation. The Manufacturer shall not be responsible in case of installation by unqualified
personnel or without complying with the general warnings and installation instructions.
For safety reasons, it is advisable to remember that:
• The pellet boiler stove should not be used by children or handicapped people not being assisted;
• do not touch the pellet boiler stove with wet parts of the body and/or bare feet;
• it is forbidden to modify the safety or adjustment devices without the manufacturer’s authorisation or indications;
• do not pull, disconnect or twist the electric cables coming out of the boiler even when it is disconnected from the
mains;
• avoid covering or reducing the combustion air duct, which is essential for correct combustion;
• keep all the packing elements out of the reach of children or handicapped people not being assisted.
In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if necessary. After that con-
tact the Authorised Assistance Centre.
After unpacking the unit, check all the parts are in good conditions and that no item is missing. Otherwise, contact the
dealer from which you purchased your pellet boiler stove.
Before installing the unit, it is advisable to clean all the ducts and pipes in the system very carefully in order to remove any
scales that may affect the stove correct operation.
Whenever the pellet boiler stove is not used for a long time, it is advisable to carry out the following operations:
• disconnect the power supply plug;
• close the water cocks of both the heating and the hot water systems;
• in case of risk of frost, empty the heating and hot water systems.
The pellet boiler stove extraordinary maintenance should be carried out at least once a year. This operation should be
scheduled in advance with the Technical Assistance Service and shall be at the Client’s expense.
CAUTION!
The first two or three times your pellet boiler stove is started, fumes emitted by the varnish may cause unpleasant smells
due to hardening. Therefore, it is advisable to air the room properly, and avoid staying long in front of the pellet boiler
stove.
Technical Specification
approx. Kg 184
80 mm
50 mm
3/4”
220V - 50Hz
140 W
350 W only start phase
25 kg
Weight
Flue pipe diameter
Air intake pipe diameter
Water inlet/outlet diameter
Power Supply
Min. electrical input
Max. electrical input
Hopper capacity
Fig. 1
4
47,5
99,5
127,5 65 115 65 127,5
168
102,5
358,5
134,5
390
1080
534
air intake
Ø 50 mm
smoke outlet
Ø 80 mm
water inlet water outlet
Aproximative dimensions (mm).
GB
Starting the Stove
Press button for a couple of seconds until the pellet boiler
stove starts.
Pellet Boiler stove start up
CAUTION!
The brazier should be cleaned before each starting. Before switching on the pellet stove, make sure that the pel-
let hopper is full, the combustion chamber is clean, the glass
door is closed, the power supply plug is connected and the
switch on the back is set to “1.”
The LED is on when the parameter
UT01 on the menu is not on OFF and
the weekly or daily programming are
set.
CAUTION!
It is advisable to use dry wood pellets, up to 6 mm in
diameter.
“Fan” will be displayed on the up-
per display and “ACC” on the lower
one. During this phase the unit
will carry out a diagnosis (around
20 seconds) on the fume extrac-
tion system.
“LOAD WOOD” is the next phase,
which indicates pellets should
be fed. The glow plug will heat
up to light the fire.
When the fume temperature is
50º C (approx. 10 minutes), the
pellet boiler stove will confirm
the ignition: “FirE” will be shown
on the upper display and “ON” on
the lower one.
After this phase, which lasts
around 5 minutes, the heating
power (e.g. po 6) and the room
temperature (e.g. 25°), will be si-
multaneously shown on the upper
display, and the system delivery
water temperature will be shown
on the lower display.
If the flame does not start up correctly within 10 minutes, the
pellet boiler stove jams: you will read the words “ALAR” on the
upper display and the words “NO ACC” blinking on the lower di-
splay. Wait 10 minutes until the cooling phase is completed,
open the door, empty the brazier and start a new light-up.
Pict. 2
Preliminary checks
5
6
12
3
4
5
“SET”
LED SYMBOL DESCRIPTION
1
2
3
4
5
6
The LED starts up every time the stove
is loading pellets
The LED blinks when the board signa-
lises a change in temperature or power
set by the infrared remote control.
The LED is on when the room tempera-
ture reaches the value set on the menu
SET Water.
The LED blinks to indicate that you are
entering the menu user/technician or
that you are modifying the temperature
set.
The LED switches on when the water
circulator is working.
Control Panel (Pict. 2)
Buttons and are used to adjust temperature, for
displays and for the programming functions.
Buttons and are used to adjust heating power.
Button is used to adjust temperature and programming
functions.
The upper and lower displays are used to view different
messages.
How to load pellets in the tank
You can load pellets in the tank through the door on the up-
per part of the stove.
Join the following procedure to load pellets:
• Open the door on the upper part of the stove;
• Load the wished pellets quantity with caution (load enough
pellets to grant a sufcient functioning of the stove);
• Close the door.

Produktspezifikationen

Marke: Zibro
Kategorie: Herd
Modell: DONATA 161 IDRO

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zibro DONATA 161 IDRO benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Herd Zibro

Zibro

Zibro R 421 E Bedienungsanleitung

31 Juli 2024
Zibro

Zibro R 59 C Bedienungsanleitung

24 Juli 2024
Zibro

Zibro SRE 188 E Bedienungsanleitung

12 Juli 2024
Zibro

Zibro DONATA 161 IDRO Bedienungsanleitung

4 Juli 2024
Zibro

Zibro RS 221 Bedienungsanleitung

28 Juni 2024
Zibro

Zibro R 26T Bedienungsanleitung

28 Juni 2024
Zibro

Zibro RS G24 Bedienungsanleitung

28 Juni 2024
Zibro

Zibro SRE 250 Bedienungsanleitung

28 Juni 2024
Zibro

Zibro SRE60XTC Bedienungsanleitung

28 Juni 2024
Zibro

Zibro SRE910 Bedienungsanleitung

28 Juni 2024

Bedienungsanleitung Herd

Neueste Bedienungsanleitung für -Kategorien-

Harvia

Harvia 22 8 WK220SES Bedienungsanleitung

16 Oktober 2024
Zibro Kamin

Zibro Kamin RCA 3000 F Bedienungsanleitung

13 Oktober 2024
Pelgrim

Pelgrim IDK784 Bedienungsanleitung

8 Oktober 2024
Basetech

Basetech BT-2268546 Bedienungsanleitung

6 Oktober 2024
Livin Flame

Livin Flame EVO Remote - Wi-Fi Module Bedienungsanleitung

5 Oktober 2024
Spartherm

Spartherm Passo S Bedienungsanleitung

5 Oktober 2024
Nestor Martin

Nestor Martin TFH33 Bedienungsanleitung

5 Oktober 2024
Livin Flame

Livin Flame Build in burners Bedienungsanleitung

5 Oktober 2024
Livin Flame

Livin Flame Karlstad Bedienungsanleitung

5 Oktober 2024
AEG

AEG BSS577121M Bedienungsanleitung

4 Oktober 2024