Zerowatt ZMS 602 N Bedienungsanleitung

Zerowatt Ofen ZMS 602 N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zerowatt ZMS 602 N (53 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/53
KULLANIM KILAVUZU
FIRINLAR TR 26
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES FR 40
USER INSTRUCTIONS
OVENS
MANUALE D’ISTRUZIONI
FORNO
EN 02
IT 14
• ZFFS140X
• ZFFS140X/E
• ZMS 602 N
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
Safety Indications
EN 02
• During cooking, moisture may condense inside the oven cavity or on the
glass of the door. This is a normal condition. To reduce this effect, wait 10-
15 minutes after turning on the power before putting food inside the oven.
ln any case, the condensation disappears when the oven reaches the
cooking temperature.
• Cook the vegetables in a container with a lid instead of an open tray.
• Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
• WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
• WARNING: the accessible parts can become hot when the grill is in use.
Children should be kept at a safe distance.
• WARNING: ensure that the appliance is switched off before replacing the
bulb, to avoid the possibility of electric shocks.
• WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not be
powered by an external switching device, such as a timer, or be connected
to a circuit that is regularly switched on and off.
• Children under 8 should be kept at a safe distance from the appliance if
not continuously supervised.
• Children should not play with the appliance.
• The appliance can be used by those aged 8 or over and by those with
limited physical, sensorial or mental capacities, without experience or
knowledge of the product, only if supervised or provided with instruction
as to the operation of the appliance, in a safe way with awareness of the
possible risks.
• Cleaning and maintenance should not be carried out by unsupervised
children.
• Do not use rough or abrasive materials or sharp metal scrapers to clean
the oven door glasses, as they can scratch the surface and cause the glass
to shatter.
• The oven must be switched off before removing the removable parts.
After cleaning, reassemble them according the instructions.
EN 03
• Only use the meat probe recommended for this oven.
• Do not use a steam cleaner for cleaning operations.
• Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must have
ground contact connected and in operation. The earth conductor is
yellow-green in colour. This operation should be carried out by a suitably
qualified professional. ln case of incompatibility between the socket and
the appliance plug, ask a qualified electrician to substitute the socket with
another suitable type. The plug and the socket must be conformed to the
current norms of the installation country. Connection to the power source
can also be made by placing an omnipolar breaker between the appliance
and the power source that can bear the maximum connected load and
that is in line with current legislation. The yellow-green earth cable should
not be interrupted by the breaker. The socket or omnipolar breaker used
for the connection should be easily accessible when the appliance is
installed.
• The disconnection may be achieved by having the plug accessible or by
incorporating a switch in the fixed wiring in accordance with the wiring
rules.
• lf the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department. The type of power cable must be H05V2V2-
F. This operation should be carried out by a suitably qualified professional.
The earth conductor (yellow-green) must be approximately 10 mm longer
than the other conductors. For any repairs, refer only to the Customer Care
Department and request the use of original spare parts.
• Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
• Any excess of spilled material should be removed before cleaning.
• A long power supply failure during an occurring cooking phase may cause
a malfunction of the monitor. ln this case contact customer service.
• The appliance must not be installed behind a decorative door in order to
avoid overheating.

Produktspezifikationen

Marke: Zerowatt
Kategorie: Ofen
Modell: ZMS 602 N

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zerowatt ZMS 602 N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ofen Zerowatt

Zerowatt

Zerowatt ZMS 602 N Bedienungsanleitung

5 September 2024
Zerowatt

Zerowatt ZMI6C42/E1 Bedienungsanleitung

5 September 2024
Zerowatt

Zerowatt ZFFS140X/E Bedienungsanleitung

5 September 2024
Zerowatt

Zerowatt ZMS 603 XN Bedienungsanleitung

5 September 2024
Zerowatt

Zerowatt ZH63DTFP/1 Bedienungsanleitung

5 September 2024
Zerowatt

Zerowatt ZFFS302NX/E Bedienungsanleitung

5 September 2024
Zerowatt

Zerowatt ZG 1531 AES Bedienungsanleitung

5 September 2024

Bedienungsanleitung Ofen

Neueste Bedienungsanleitung für -Kategorien-

Indesit

Indesit VL 22 S Bedienungsanleitung

16 Oktober 2024
Gaggenau

Gaggenau BMP225130 Bedienungsanleitung

16 Oktober 2024
Wolf

Wolf M Series Bedienungsanleitung

16 Oktober 2024
Princess

Princess 112741 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia HR750VGTCH Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia HR750VGTAN Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia HR640VGTCO Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia HR640VGTCH Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia HR640VGTAN Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia HR640VGCH Bedienungsanleitung

16 Oktober 2024