Zempire Drift Bedienungsanleitung

Zempire Zelt Drift

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Zempire Drift (2 Seiten) in der Kategorie Zelt. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
2. Assemble the 6 pole sections.
Ensure that the poles are inserted
fully in tho the steel connectors.
6. Peg out the four corners
firmly ensuring that the floor
sits at flat as possible.
7. Peg out all the remaining peg
points around the tent. Firmly peg
out the rear guy rope attached to
the large fin at the rear of the tent
at a 45o angle.
9. Pull the fly over the tent
and connect the SR buckle sewn
onto the fin at the rear of the
tent. Attach the hooks onto the
loops sewn around the pole
sleeves.
10. Peg out all the guy ropes. Try to
have guy ropes at a 45o angle to the
ground. Also peg out the lower draft
vents on each side of the tent.
3. Thread the RED poles through the
pole sleeves that run diagonally across
the centre of the tent. Tension the poles
inserting the pins located directly under-
neath each pole sleeve into the ends of
the poles. It may be easier to have
someone to support the crossover of the
poles during this step.
PITCHING INSTRUCTIONS - DRIFTairflowseries
4. Thread the BLUE pole through the
front and the pole through the GREEN
rear pole sleeves that run across the
centre of the tent. Tension the poles
inserting the pins located directly under-
neath each pole sleeve into the ends of
the poles. .
5. Thread the YELLOW pole
through the pole sleeve at the rear
of the tent. Tension the poles insert-
ing the pins located at the rear
corners of the tent.
8. Thread the remaining think
(4mm) pole through the pole
sleeve underneath the vent cover
above the door and insert the
pole ends into the small pockets
on each side.
1. Clear your site making sure there are no
sharp objects. Try to get a site that is as flat
as possible. Stretch out the tent with the
door facing the front.
Copyright 2014
pitching instructions
DRIFTairflowseries
Freedom Zempire is proud to be a
100% New Zealand owned and
operated business.
For more information about this
and other great products we offer
please visit our website.
WWW.FREEDOMCAMPING.COM
1. Ensure guy ropes are pegged out at all times during use
2. Never pack your tent away wet. If you must take your tent down when
wet, ensure that you dry you tent completely as soon as possible to
prevent mildew forming.
3. If mildew does form on your tent wash off pours with warm water and a
soft brush to prevent further growth. Do not use detergents.
4. Do not use an open flame inside your tent. The fabric has been treated
with a fire retardant but is in no way fire proof
5. Clean all pegs and poles before storing
6. If your poles do break, use the repair sleeve to cover over the broken
section. Once you have returned contact your local retailer for a
replacement pole section.
PITCHING INSTRUCTIONS - DRIFTairflowseries
11. For extra warmth and privacy
you may decide to attach the
inner inside the tent. Lay out the
inner inside the tent with the
door facing the front and the
floor facing downwards. Attach
the corner male buckles to the
female buckles sewn into the
inside rear corners of the tent.
Connect the toggles through the
corresponding rings sewn on the
tent working your way front the
rear to the front of the inner. Peg
down the front of the inner and
cover.


Produktspezifikationen

Marke: Zempire
Kategorie: Zelt
Modell: Drift

Brauchst du Hilfe?

Wenn Sie Hilfe mit Zempire Drift benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Zelt Zempire

Bedienungsanleitung Zelt

Neueste Bedienungsanleitung für -Kategorien-