Yuneec Typhoon G Bedienungsanleitung

Yuneec Spielzeug Typhoon G

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yuneec Typhoon G (1 Seiten) in der Kategorie Spielzeug. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
The SteadyGrip™ is a ground handle designed to extend the GoPro® camera from
the sky to the ground, allowing you to capture amazing acon shots easier than
ever before. The camera pitch controller allows precise camera angle control on the
go using your mobile device as a display. The SteadyGrip's ergonomic design is
capable of holding up to a 6.4 inch mobile device.
The GB203 is a 3-Axis brushless self-stabilizing gimbal, compable with GoPro®
Hero 3, Hero 3+, Hero 4 Black and Hero 4 Silver, extending the use of the GoPro®
Camera to capture smooth and fluid photographs and video footage on the ground,
and amazing video footage in the sky as well.
Please take the me to read through this enre instrucon manual for more
informaon on safety, baery charging, camera controls and more before filming
your first hit video. Please also visit www.Yuneec.com for addional informaon
including product updates, bullens, videos and more.
GENERAL SAFETY PRECAUTIONS AND WARNINGS
WARNING: Failure to use this product in the intended manner as described in
instrucon manual can result in damage to the product, property and/or cause
serious injury. This product is not a toy! If misused it can cause serious bodily harm
and damage to property.
WARNING: As the user of this product you are solely and wholly responsible for
operang it in a manner that does not endanger yourself and others or result in
damage to the product or the property of others.
Always allow GB203 and SteadyGrip™ to inialize properly by seng the Steady-
Grip™ on a flat and stable surface prior to switching it on and allowing the Steady-
Grip™ and GB203 to inialize properly which somemes takes about 12 seconds.
Always operate your SteadyGrip™ in a respecul and safe manner.
FCC STATEMENT:
This equipment has been tested and found to comply with the limits for Part 15
of the FCC rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instrucons, may cause harmful interference to radio
communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
BATTERY WARNINGS AND USAGE GUIDELINES
WARNING: Alkaline Baeries May explode or leak, and cause burn injury if
recharged, disposed of in fire, mixed with a different baery type, inserted
backwards or disassembled. Replace all baeries at the same me. Do not carry
baeries loose in your pocket or purse. Do not remove the baery label.
WARNING: All instrucons and precauons must be read and followed exactly
and you must follow instrucons of the baery manufacturer.
INSTALLING THE AA BATTERIES
WARNING: Alkaline Baeries May explode or leak, and cause burn injury if
recharged, disposed of in fire, mixed with a different baery type, inserted
backwards or disassembled. Replace all baeries at the same me. Do not carry
baeries loose in your pocket or purse. Do not remove the baery label.
NOTICE: The use of rechargeable baeries is only recommended.
ATTACHING THE GB203 TO THE STEADYGRIP™
WARNING: Before switching on the SteadyGrip™ it is highly recommended to first
securely aach the GB203 to your SteadyGrip™.
QUICK TIP: Make sure that you have your microSD card with lots of space for
photos and videos handy.
STEP 1) Remove the protecve cover for the contactor as illustrated.
STEP 2) Carefully slide the top part of the GB203 (that also aaches below the
nose of the TYPHOON) onto the mount below the front part of the SteadyGrip™. A
corresponding ‘click’ will be noced once the GB203 has securely been installed
into the slide-in mount on the SteadyGrip™.
GoPro® COMPATIBLE DEVICES
Android:
Depending on devices
Windows Phone (8 & 8.1)²
NOTICE: Please refer to the official website of GoPro® for the latest
informaon.
WINDOWS SYSTEM
REQUIREMENTS
Windows XP (Service Pack 2 or later)
or Vista
3.2GHz Penum 4 or faster
Minimum 4GB of system RAM
MAC SYSTEM
REQUIREMENTS
Mac OS® X 10.4.11 or later
2.0GHz Intel Core Duo or faster
Minimum 4GB of system RAM
NOTICES AND WARNINGS
IMPORTANT NOTE: All safety precauons and warnings, instrucons, warranes
and other collateral informaon is subject to change at the sole discreon of
Yuneec. For the most up-to-date informaon please visit the corresponding
product page at www.Yuneec.com or contact the nearest Yuneec office or
authorized distributor.
The following special language terms are used throughout the product literature to
indicate various levels of potenal harm when operang this product:
NOTICE: Procedures, which if not properly followed, create a possibility of property
damage and/or lile to no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of
property damage and/or a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of
property damage, collateral damage and/or serious injury or create a high probability
of superficial injury.
WARNING: Read the ENTIRE instrucon manual to become familiar with the
features of the product before operang. Failure to operate the product correctly
can result in damage to the product, property and/or cause serious injury.
WARNING: This is a sophiscated consumer product. It must be operated with
cauon and common sense, and requires some basic mechanical ability. Failure to
operate this product in a safe and responsible manner could result in damage to the
product, property and/or cause serious injury. This product is not intended for use
by children without direct adult supervision. Do not use with incompable
components or alter this product in any way outside of the instrucons provided by
Yuneec. The instrucon manual contain instrucons for safety, operaon and
maintenance. It is essenal to read and follow all the instrucons and warnings
prior to assembly, setup and/or use in order to operate the product correctly and
avoid damage or serious injury.
AGE RECOMMENDATION: NOT FOR CHILDREN UNDER 14 YEARS. THIS IS NOT
A TOY.
Apple iOS:
iphone/ipad/ipod touch
OVERVIEW
SteadyGrip™ and GB203
for GoPro® Cameras
1. GB203
2. Main Status LED
3. Pitch Control Roller Wheel
4. Mode Switch Buon
5. Rubberized Ergonomic Grip
6. On/Off Switch
7. 8x AA Baery Compartment
STEP 1) Remove the Baery Cover / Door from the boom of the SteadyGrip™
Hold the boom of the SteadyGrip™ toward yourself with the front part facing
downward. Slide the baery cover / door upward with slight force and inspect the
AA baery compartment.
STEP 2) Install 8x AA Baeries
Install 8x AA Baeries as illustrated.
STEP 3) Re-installing the Baery Cover / Door on the boom of the SteadyGrip™
Once you’ve installed 8 fresh AA baeries, Hold the boom of the SteadyGrip™
toward yourself with the front part facing downward. Slide the baery cover / door
downward with slight force and ensure you hear and feel a noceable ‘click’
indicang the baery cover / door has been closed securely.
STEP 3) Powering on and inializaon. Place your
SteadyGrip™ on a flat and stable surface, then switch
on the SteadyGrip™ and it will inialize aer 12
seconds of no movement or vibraon. The LED Status
indicator on the GB203 will blink green slowly when
inializaon is completed.
GB203 LED Status:
GB203 Connecng with the SteadyGrip: LED blinking green slowly
GB203 Failing to Connect with the SteadyGrip: LED off
GB203 Connecng with the Remote Controller: LED blinking green slowly
GB203 Error: LED blinking red
CUSTOMER SERVICE
YUNEEC EU
24568 Kaltenkirchen, Germany
+49 4191 932620
eusales@yuneec.com
YUNE EC AU
53 Ellemsea Circuit, Lonsdale
South Australia 5160
+61 (0) 8 8186 3301
aussales@yuneec.com
YUNEEC USA
5555 Ontario Mills Parkway,
Ontario, CA91764, USA
1 855 2848888
sales@yuneec.com
YUNEEC HK
2/F, Man Shung Industrial Building,
7 Lai Yip Street, Kwun Tong,
Kowloon, Hong Kong
852 3616 6071
asiasales@yuneec.com
hp://yuneec.com/support
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any informaon above might be changed due to the soware update.
For the latest documents, please check the official website.
CAMERA CONTROL
Please be sure to set photo or video mode for GoPro® Camera BEFORE installing
it into the GB203. Any operaon related to camera controls should be referred to
and downloaded according to the official website of GoPro®. GoPro® requires
APP to take photos and record videos.
NOTICE: MK58 is for long-distance real-me image transmission when installing
it on the aircra.
SWITCHING THE MODE
There are two modes of Pitch Follow Mode and Angle Mode.
Pitch Follow Mode allows the gimbal camera to track SteadyGrip in pitch
direcon. The Main Status LED indicator will be solid green.
In Angle Mode, the camera lens scks to a fixed direcon instead of following the
movement of the SteadyGrip. The user can control the Pitch Direcon through
pitch control roller wheel.
NOTICE: The default mode of SteadyGrip is Pitch Follow Mode.
To Enter Angle Mode:
Press the Mode Switch Buon on the top of the SteadyGrip to exit the Pitch
Follow mode. The Main Status LED indicator will blink GREEN. The SteadyGrip
will enter Angle Mode.
To Enter Pitch Follow Mode:
Press Mode Switch Buon again to enter Pitch Follow Mode. The Main Status
LED indicator will be solid green.
NOTE: When SteadyGrip™ is in Pitch Follow status, the gimbal camera tracks
SteadyGrip™ in pitch direcon, and the gimbal pitch control roller wheel on
SteadyGrip™ is disabled.
WARNING: procedures, which if not properly followed, create the probability of
property damage, collateral damage and serious injury or create a high probability
of superficial injury.
Failure to exercise care while using this product and comply with the following
condions and guidance could result in product malfuncon, excessive heat, fire,
property damage, and ulmately injury.
Lithium lon baeries are not toys. For the purpose of the document Li-lon, Li-Po,
Li-Fe, NiCd or NiMH baeries will be described as "Baeries".
Handling and Storage:
● Never alter, puncture or impact Baeries or related components.
● Do not directly connect the terminals with metal objects. This will short-circuit
Baeries, resulng in heat and electrical discharge.
● Never store loose Baeries together, the Baeries' terminals may contact one
another causing a short circuit.
● Never expose Baeries to extreme temperatures or direct sunlight.
● Always disconnect Baeries when not in use.
Before the First Charge:
● Ensure baeries are not damaged, as this may cause a short circuit of fire. Charging
● Always refer to your charger's manual to ensure safe operaon.
● Always charge Baeries in an open area away from flammable materials, liquids and surfaces.
● Never charge Baeries that are hot to the touch (above 120°F)
If at any me Baeries become damaged, hot, or begin to balloon or swell,
disconnue charging (or discharging) immediately. Quickly and safely disconnect
the charger. Then place the Baeries and/or charger in a safe, open area away from
flammable materials in an approved Li-Po bag to observe. Aer one hour, remove
the Baeries from service. DO NOT connue to handle, aempt to use, or ship the
Baeries. Failure to follow these procedures can cause damage to Baeries,
personal property or cause serious injury.
Damaged or swollen Baeries can be unstable and very hot. DO NOT touch
baeries unl they have cooled. Dispose of baeries in the manner required by
your city, county, state or country. Contact the appropriate Yuneec Product
Support Office to speak to a service technician for more informaon.
In the event of fire, a Class D, dry chemical fire exnguisher must be used then
baeries must be placed inside of an approved Li-Po bag.
Addional Guidelines and Warnings:
● In the event of a crash, always quickly and safely disconnect and remove Baeries
from the model. Then follow the previously listed safety procedures.
● If the internal contents of Baeries come into contact with your skin, wash the
affected area(s) with soap and water immediately. If it comes into contact with your
eye(s), flush them with generous amounts of water for 15 minutes and seek
immediately medical aenon.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operaon is subject to the
following two condions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operaon.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
ons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE WARNING
• This equipment must be installed and operated in accordance with provided
instrucons and the antenna(s) used for this transmier must be installed to
provide a separaon distance of at least 20 cm from all persons and must not be
co-located or operang in conjuncon with any other antenna or transmier.
End-users and installers must be provide with antenna installaon instrucons and
transmier operang condions for sasfying RF exposure compliance.
IC RADIATION EXPOSURE STATEMENT FOR CANADA
This device complies with Industry Canada licence-exempt RSS standard(s).
Operaon is subject to the following two condions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitaon est autorisée aux deux
condions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est suscepble d'en compromere le fonconnement.
This equipment complies with IC RSS-102 radiaon exposure limit set forth for an
uncontrolled environment.
Cet équipement respecte les limites d'exposion aux rayonnements IC définies
pour un environnement non contrôlé
ATTACHING A MOBILE DEVICE TO THE STEADYGRIP™
Step 1) Press the Curved Lip at the top
front of the SteadyGrip™ as illustrated
and fit your Mobile Device with the
screen facing toward the Main LED and
Pitch Control Wheel.
Step 2) Bind your Mobile Device to the
GoPro® camera.
The SteadyGrip™ features a camera pitch controller that allows precise camera
angle control on the go. Simply roll the pitch control wheel forward to move the
camera pitch/angle downward and roll the pitch control wheel backward to move
the camera pitch/angle upward. Please review these instrucons along with the
illustraons to familiarize yourself on how to control the GB203 and GoPro®
camera with your SteadyGrip™.
USING THE CAMERA PITCH CONTROL WHEEL
GROUND IMAGING SYSTEM
INTRODUCTION
GROUND IMAGING SYSTEM
GROUND IMAGING SYSTEM
NOTICE: The GB203 can be supplied with power through SteadyGrip™ by the Lipo
Balance Connetor Charge Lead (sold seperately) when the contact is damaged.
SteadyGrip™ LED STATUS:
Main Status LED:
Upon Powering on: Green LED blinking for twice and
then solid GREEN
Low Voltage Warning: RED LED blinking slowly
Power Cut-off: RED LED blinking quickly
Pitch Follow Funcon on: GREEN LED solid
Pitch Follow Funcon off: GREEN LED blinking
SPECIFICATIONS
STEADYGRIP™
Height: 223mm (8.78 in)
Depth (front to back): 182mm (7.17 in)
Width: 70mm (2.76 in)
Weight (without gimbal/baeries): 254g (8.96 oz)
Angle Control Range (Pitch): 30° to -90°
Runme: 240 min (depending on usage)
GB203
Dimensions: 110*80*115mm(4.33*3.15*4.53in)
Weight(without camera): 145g(5.11oz)
Pitch Control Range: 30°~-90°
Pitch Mechanical Range: 75°~-120°
Roll Mechanical Range: -45°~+45°
Yaw Mechanical Range: -45°~+45°
Compable Device: GoPro®Hero 3, Hero 3+, Hero 4 Black, Hero 4
Silver
NOTICE: If use MK58, GoPro®Hero4 Black is suggested to achieve

Produktspezifikationen

Marke: Yuneec
Kategorie: Spielzeug
Modell: Typhoon G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Yuneec Typhoon G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Spielzeug Yuneec

Yuneec

Yuneec Typhoon G Bedienungsanleitung

14 August 2024
Yuneec

Yuneec E-Go 2 Bedienungsanleitung

23 Juli 2024
Yuneec

Yuneec Tornado H920 Bedienungsanleitung

17 Juli 2024

Bedienungsanleitung Spielzeug

Neueste Bedienungsanleitung für -Kategorien-

Lego

Lego Blue Player & Goal Bedienungsanleitung

16 Oktober 2024
Lego

Lego Raceway Rider Bedienungsanleitung

14 Oktober 2024
Lego

Lego Dora Club Co-Pack Bedienungsanleitung

13 Oktober 2024
Lego

Lego Puppy Playground Bedienungsanleitung

11 Oktober 2024
Lego

Lego Value Pack Star Wars Bedienungsanleitung

10 Oktober 2024
Megableu

Megableu Griezel Graf Bedienungsanleitung

8 Oktober 2024
Lego

Lego Mini ARC Fighter Bedienungsanleitung

8 Oktober 2024
Velleman

Velleman KNS4 Bedienungsanleitung

7 Oktober 2024
Lego

Lego Doc & Patient Bedienungsanleitung

7 Oktober 2024
Playmobil

Playmobil 9181 Bedienungsanleitung

7 Oktober 2024