Yamaha RX-E100 Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Yamaha RX-E100 (31 Seiten) in der Kategorie Hifi. Dieser Bedienungsanleitung war fĂźr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/31
RL
RX-E100 / CDX-E100
OWNERâS MANUAL
MODE DâEMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Natural Sound Stereo Receiver/Natural Sound Compact Disc Player
RĂŠcepteur StĂŠrĂŠo/Lecteur Compact Disque
BG
SUPPLIED ACCESSORIES ⢠After unpacking, check that the following parts are contained.
ACCESSOIRES FOURNIS ⢠Après le dÊballage, vÊrifier que les pièces suivantes sont incluses.
MITGELIEFERTES ZUBEHĂR
⢠Nach dem Auspacken ßberprßfen, ob die folgenden Teile vorhanden sind.
MEDFĂLJANDE TILLBEHĂR⢠Kontrollera efter det apparaten packats upp att fĂśljande delar finns med.
ACCESSORI IN DOTAZIONE â˘
Verificare che tutte le parti seguenti siano contenute nellâimballaggio
dellâapparecchio.
ACCESORIOS INCLUIDOS ⢠Desembale el aparato y verificar que los siguientes accesorios estån en la caja.
BIJGELEVERDE ACCESSOIRES
⢠Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
⢠Remote control
⢠TÊlÊcommande
⢠Fernbedienungseinheit
⢠Fjärrkontrollen
⢠Telecomando
⢠Mando a distancia
⢠Afstandbediening
⢠AM loop antenna
⢠Antenne cadre AM
⢠MW-Rahmenantenne
⢠AM ramantenn
⢠Antenna AM ad uso interno
⢠Antena de cuadro de AM
⢠AM ringantenne
⢠Indoor FM antenna
⢠Antenne intÊrieure FM
⢠UKW-Innenantenne
⢠FM inomhusantenn
⢠Antenna FM per interni
⢠Antena interior de FM
⢠FM binnenantenne
⢠Batteries (size AAA, UM-4, R03)
⢠Piles (format AAA, UM-4, R03)
⢠Batterien (GrĂśĂe AAA, UM-4, R03)
⢠Batterier (Storl. AAA, UM-4, R03)
⢠Batterie (size AAA, o UM-4, o R03)
⢠Pilas (tamaùo AAA, tipo UM-4, R03)
⢠Batterijen (maat AAA, UM-4, R03)
<RX-E100>
<CDX-E100>
⢠System Control Cable
⢠Câble de commande du système
⢠Systemsteuerkabel
⢠Systemkontrollkabel
⢠Cavo di telecomando del sistema
⢠Cable de control del sistema
⢠Systeembedieningskabel
⢠RCA Pin Cable
⢠Câble de raccordement RCA
⢠RCA-Stiftkabel
⢠RCA stiftkabel
⢠Cavo con spinotti a spillo RCA
⢠Cable con clavijas RCA
⢠RCA (tulpstekker) kabel
SLEEP
A
D
C
E
B
TIME
RNDM
VOLUME
MODE
PTY SEEKFREQ PS/PTY/RT/CT
START
TAPE
AUX
MD CD
TUNER
PRESET
PTY SELECT
TAPE
MD REC
MODE START
TAPE REC
DISP
PROG
TAPE
REP
PEAK
DUBBING
E-1
English
INTRODUCTION
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the
best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
ENGLISH
FEATURES
<RX-E100>
⢠Minimum RMS Output Power per Channel
40 W + 40 W (6âŚ, 20 - 20,000Hz, 0.1% THD)
⢠Full Operation System Remote Control
⢠40-Station FM/AM Preset Tuning
⢠Multi-Function RDS Reception
⢠SUBWOOFER Output Terminal
<CDX-E100>
⢠S-bit DAC and 8fs Digital Filter
⢠Optical Digital Output
⢠Random, Repeat, and Program Play
⢠CD TEXT Display
⢠Peak Level Search
⢠Tape Programming
The receiver (RX-E100) and CD player (CDX-E100) are the main units of the YAMAHA E100 series. You could upgrade
the system by adding the cassette deck (KX-E100) and MD recorder (MDX-E100)*.
* MD recorder (MDX-E100) may not be available for some areas.
PRECAUTIONS...................................................2
GETTING STARTED
The remote control ...............................................3
Connecting the speakers .......................................4
Connecting the system..........................................5
<RX-E100>
NAMES OF BUTTONS AND CONTROLS .......6
BASIC OPERATIONS
Listening to a source.............................................8
TUNER OPERATIONS
Listening to the radio............................................9
Presetting stations ............................................... 10
RECEIVING RDS STATIONS
Receiving RDS data ........................................... 11
PTY SEEK mode................................................12
Optional settings for RDS functions...................13
USING THE BUILT-IN TIMER
Setting the clock .................................................14
Adjusting the brightness of the display ..............14
Before using the timer ........................................15
Timer play and recording ...................................15
Sleep timer..........................................................16
<CDX-E100>
NAMES OF BUTTONS AND CONTROLS .....17
COMPACT DISC PLAYER OPERATIONS
CD playback .......................................................19
Selecting the time display and CD TEXT ..........20
Random-sequence play.......................................20
Repeat play .........................................................21
Program play ......................................................21
Peak level search ................................................22
ADD KX-E100 AND/OR MDX-E100 TO YOUR
SYSTEM
Operating the cassette deck, KX-E100 and MD
recorder, MDX-E100 with the remote control ...23
Before recording ................................................. 24
Dubbing setting ..................................................24
TAPE programming............................................25
ADDITIONAL INFORMATION
CD preventive care .............................................26
Troubleshooting..................................................26
Specifications .....................................................28
CONTENTS
E-2
IMPORTANT:
The wires in the mains lead are coloured in accordance
with the following code:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The wire which is coloured BLUE
must be connected to the terminal which is marked
with the letter N or coloured BLACK. The wire which
is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
CAUTIONS
⢠To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
⢠Install your unit in a well ventilated, cool, dry, clean
place â away from windows, heat sources, vibration,
dust, moisture, or cold. To avoid humming sounds,
locate the unit away from other electrical appliances,
motors, and transformers. To prevent fire or electrical
shock, do not expose to rain and water.
⢠(U.K. and Europe models only)
Be sure to allow at least 10 cm of ventilation space at
the top, on left, right, and back sides of RX-E100.
⢠Do not operate the unit upside-down. It may overheat,
possibly causing damage.
⢠Never open the cabinet. If something drops into the set,
contact your dealer.
⢠Do not use force on switches, knobs or cords.
⢠Always set the VOLUME control to minimum before
starting playback of an audio source: increase the
volume gradually to an appropriate level after play has
started.
⢠When not planning to use this unit for long periods of
time (i.e., vacation, etc.), disconnect the AC power plug
from the wall outlet.
⢠Grounding or polarization â Precautions should be taken
so that the grounding or polarization of the unit is not
defeated.
⢠Do not clean the unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
⢠Be sure to read the âTroubleshootingâ section on
common operating errors before concluding that your
unit is faulty.
⢠Do not place another component on top of this unit, as
damage or discoloration on the surface of the unit may
result.
⢠To prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
⢠When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
⢠Do not plug the AC power plug to the wall outlet before
you finish all connections.
⢠The voltage to be used must be the same as that
specified on this unit. Using this unit with a higher
voltage than that which is specified is dangerous and
may result in a fire or other type of accident causing
damage. YAMAHA will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
⢠When listening to the receiver at a high volume level for
a long time, the temperature inside the unit rises. To
prevent overheating and possible damage to this unit,
the internal fan starts running.
⢠Sudden temperature changes and storage or operation in
an extremely humid environment may cause
condensation inside the cabinet.
PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT
This compact disc player is
classified as a CLASS 1
LASER product.
The CLASS 1 LASER
PRODUCT label is located
on the rear exterior.
CLASS 1 LASER PRODUCT
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
CAUTION FOR CARRYING THE UNIT
Before carrying the unit, first remove all discs from
the unit, press STANDBY/ON to turn the unit off,
then disconnect the AC power plug from the wall
outlet.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
The unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off. This state is called the standby
mode. In this state, this unit is designed to consume a
very small quantity of power.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described above.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous
if engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
E-3
English
STANDBY/ON PHONES
DISPLAY
+-+-
RL
MEMORY AUTO/MAN'L
TIME ADJ TIMER HOUR MIN
BASS TREBLE BALANCE
MAXMIN
VOLUME
INPUT
PRESET/TUNINGPRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E100
30°
30°
Battery replacement
If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
Remote control
sensor
The remote control
This remote control controls a whole system: not only
RX-E100 but also CDX-E100. Moreover, a cassette deck
(KX-E100) and MD recorder (MDX-E100) that level up
your system can be operated by it. Operating buttons for
each unit are explained on the pages below:
Receiver, RX-E100: p.7
CD player, CDX-E100: p.18
Cassette deck, KX-E100: p.23
MD recorder, MDX-E100: p.23
Loading the batteries for the remote control
1Remove the battery compartment cover.
2Insert 4 batteries into the battery compartment.
3Replace the battery compartment cover.
Remote control operation range
Notes
⢠There should be no large obstacles between the remote control
and the main unit.
⢠If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
Within approximately
6 m (20 feet)
GETTING STARTED
Notes
⢠Use only AAA, UM-4, R03 batteries for replacement.
⢠Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
⢠Remove the batteries if the remote control will not be used for
an extended period of time.
⢠If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
E-4
STEP
FREQUENCY
D
L
R
C
AB E
LR
L
R
SYSTEM
CONNETOR
SUBWOOFER
OUT
OUT IN IN
MD
CD
AUX
TAPE
6 ⌠MIN./SPEAKER
SPEAKERS
FM ANT GND AM ANT
75 ⌠UNBAL
Connecting the speakers
Never plug the AC power cord to the wall outlet until all connections are completed.
Follow the steps as shown below to connect the system using the supplied cords and accessories.
1Connect the Speakers.
1Unscrew the knob.
2Remove approx. 5 mm (1/4â) of insulation from
each of the speaker wires and insert the bare wire
into the terminal.
3Tighten the knob to secure the wire.
2Connect the AM Antenna.
Set up the AM loop antenna, then connect it.
3Connect the FM Antenna.
4Connect the AC power cord to a wall outlet.
⢠Use external FM/AM antennas if you need better reception.
Consult your dealer.
⢠The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.
To Connect the Subwoofer (optional)
You can reinforce the bass frequencies by adding a
subwoofer (optional).
Connect the SUBWOOFER OUT terminal of the unit to
the INPUT terminal of the subwoofer.
1
2
3
4To wall outlet
FM antenna
AM loop antenna
Right speaker Left speaker
GETTING STARTED
Red: positive(+)
Black: negative(â) 12
3
GND AM ANT
FM ANT
75 ⌠UNBAL
E-6
Display
#RDS indicator (P.11)
âšRDS mode indicators (P.11)
$PTY HOLD indicator (P.12)
âşTIMER indicator (P.15)
%SLEEP indicator (P.16)
Front panel
~STANDBY/ON (P.8)
ŸPHONES (P.8)
!DISPLAY (P.14)
âMEMORY/TIME ADJ (P.10/P.14)
@AUTO/MANâL/TIMER (P.9/P.15)
¤BASS (P.8)
#TREBLE (P.8)
âšBALANCE (P.8)
$INPUT (P.8)
~Multi-information display
ŸPRESET indicator (P.10)
!STEREO indicator (P.9)
âTUNED indicator (P.9)
@AUTO indicator (P.9)
¤MEMORY indicator (P.10)
RX-E100 NAMES OF BUTTONS AND CONTROLS
âşVOLUME (P.8)
%PRESET/TUNING / PTY SELECT
(P.9/P.12)
HOUR/MIN (P.14)
ďŹPRESET/BAND (P.9)
^Display (P.6)
ďŹRemote Control Sensor (P.3)
&TIMER indicator (P.15)
âĄSTANDBY indicator (P.8)
STEREO AUTO RDS PS PTY RT CT TIMER
SLEEPTUNED MEMORY PTY HOLD
PRESET
STANDBY/ON PHONES
DISPLAY
+-+-
RL
MEMORY AUTO/MAN'L
TIME ADJ TIMER HOUR PTY SELECT MIN
BASS TREBLE BALANCE
MAXMIN
VOLUME
INPUT
PRESET/TUNINGPRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E100
STANDBY
TIMER
E-7
English
Remote control
~SLEEP (P.16)
ŸDISP (Display) (P.13)
!A/B/C/D/E (P.10)
âPOWER (P.8)
@Preset numbers (P.10)
¤FREQ PS/PTY/RT/CT (P.11)
#PTY SEEK MODE (P.12/P.13)
âšPTY SEEK START (P.12/P.13)
$VOLUME + â (P.8)
âşTAPE (KX-E100) (P.23)
%MD (MDX-E100) (P.23)
ďŹAUX (The equipment connected to the AUX
terminal) (P.5)
^CD (CDX-E100) (P.19)
ďŹTUNER (RX-E100) (P.10)
&PRESET/PTY SELECT / (P.10/P.12)
Note
â˘âş~ďŹ are operation buttons and input selectors for each
component.
RX-E100 NAMES OF BUTTONS AND CONTROLS
A
D
C
E
B
TIME
RNDM
VOLUME
MODE
PTY SEEKFREQ PS/PTY/RT/CT
START
TAPE
AUX
MD CD
TUNER
PRESET
PTY SELECT
TAPE
MD REC
MODE START
TAPE REC
PROG
TAPE
REP
PEAK
DUBBING
SLEEP DISP
E-8
RX-E100 BASIC OPERATIONS
Listening to a source 4Play the source. (Refer to the ownerâs manual
supplied with each selected component.)
5Adjust the volume level by turning VOLUME on the
front panel or pressing VOLUME + on the remote
control.
6If desired, adjust BASS, TREBLE, and BALANCE.
BASS: Turn this control clockwise to increase (or
counterclockwise to decrease) the low frequency
response.
TREBLE: Turn this control clockwise to increase (or
counterclockwise to decrease) the high frequency
response.
BALANCE: Adjust the balance of the output volume
from the left and right speakers to compensate for
sound imbalance caused by the speaker location or
listening room conditions
⢠These controls are only effective for the sound from the main
speakers.
When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound from the main speakers through the
headphones.
When you have finished using this
unit
Press STANDBY/ON on the front panel again or
POWER on the remote control to set this unit to the
standby mode.
⢠The STANDBY indicator lights up.
Auto power off function
RX-E100 will be put automatically into the standby mode
under the following conditions:
⢠The component connected to RX-E100 is in stop mode
and not operated for 30 minutes.
â˘TUNER or AUX is not selected as an input source.
STANDBY/ON PHONES
DISPLAY
+-+-
RL
MEMORY AUTO/MAN'L
TIME ADJ TIMER HOUR PTY SELECT MIN
BASS TREBLE BALANCE
MAXMIN
VOLUME
INPUT
PRESET/TUNINGPRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E100
TIMER
STANTBY
VOLUME
STANDBY/ON INPUTBALANCE
TREBLE
BASS
PHONES
A
D
C
E
B
TIME
RNDM
VOLUME
MODE
PTY SEEKFREQ PS/PTY/RT/CT
START
TAPE
AUX
MD CD
TUNER
PRESET
PTY SELECT
TAPE
MD REC
MODE START
TAPE REC
PROG
TAPE
REP
PEAK
DUBBING
SLEEP DISP
POWER
VOLUME â/+
1Set the volume to âMINâ by turning VOLUME.
2Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
⢠RX-E100 can be used to turn on or put in standby mode
the system connected E100 series components depending
on their prior standby/on status.
3Select the desired input source by turning INPUT so
that the source appears on the display.
⢠When you operate the component connected to the AUX
terminal, turn INPUT to select AUX.
E-9
English
TUNER OPERATIONS
Automatic tuning
1Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
2Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
âPRESETâ appears on the display).
3Press AUTO/MANâL so that âAUTOâ appears in the
display.
4Press PRESET/ TUNING (For a higher
frequency) or (For a lower frequency).
5The unit starts searching for a station.
When the unit finds a station, the unit stops searching
and âTUNEDâ appears on the display.
6If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
⢠If automatic tuning search does not find the desired station, try
manual tuning as described next.
⢠When an FM stereo broadcast with sufficient signal strength is
received, âSTEREOâ appears on the display and you can listen
to stereo sound.
Listening to the radio Manual tuning
1Follow steps 1 and 2 described in âAutomatic
tuning.â
2Press AUTO/MANâL so that âAUTOâ disappears
from the display.
3Press TUNING (For a higher frequency) or
(For a lower frequency) to select your desired station.
⢠Each time you press TUNING or , the frequency
changes step by step.
You can find radio stations automatically and manually.
STEREO AUTO
TUNED
STANDBY/ON PHONES
DISPLAY
+-+-RL
MEMORY AUTO/MAN'L
TIME ADJ TIMER HOUR PTY SELECT MIN
BASS TREBLE BALANCE
MAXMIN
VOLUME
INPUT
PRESET/TUNINGPRESET/BAND
NATURAL SOUND STEREO RECEIVER RX-E100
PRESET/TUNING /
INPUT
AUTO/MANâL
PRESET/BAND
Produktspezifikationen
| Marke: | Yamaha |
| Kategorie: | Hifi |
| Modell: | RX-E100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Yamaha RX-E100 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hifi Yamaha
4 Juli 2024
4 Juli 2024
2 Juli 2024
2 Juli 2024
28 Juni 2024
Bedienungsanleitung Hifi
- Hifi Philips
- Hifi Sony
- Hifi Panasonic
- Hifi MarQuant
- Hifi Grundig
- Hifi Kenwood
- Hifi Mpman
- Hifi JVC
- Hifi Sherwood
- Hifi Paradigm
- Hifi Velodyne
Neueste Bedienungsanleitung fĂźr -Kategorien-
17 September 2024
25 August 2024
25 August 2024
19 August 2024
19 August 2024
16 August 2024
14 August 2024
14 August 2024
3 August 2024
23 Juli 2024