Yamaha KMS-710 Bedienungsanleitung
Yamaha
Karaoke-System
KMS-710
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Yamaha KMS-710 (2 Seiten) in der Kategorie Karaoke-System. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
KMS-910/KMS-710 Karaoke Speaker System
Thank you for selecting the Yamaha Karaoke Speaker System.
PRECAUTIONS
OWNER’S MANUAL English
Read this before using the speaker.
To assure the finest performance, please read this manual carefully. Keep it in a safe place for
future reference.
Install the speaker in a cool, dry, clean place – away from windows, heat sources, sources
of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers,
motors). To prevent fire or electrical shock, do not expose the speaker to rain or water.
To prevent the enclosure from warping or discoloring, do not place the speaker where it will
be exposed to direct sunlight or excessive humidity.
Do not place the following objects on the speaker:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may cause damage to the speaker, and/or
you may get an electric shock.
Do not place the speaker where foreign objects such as water drips might fall. It might cause
a fire, damage to the speaker, and/or personal injury.
Do not place the speaker where it is liable to be knocked over or struck by falling objects.
Stable placement will also ensure better sound performance.
Placing the speaker on the same shelf or rack as the turntable can result in feedback.
Never put a hand or a foreign object into the port located on the rear of the speaker as this
might cause personal injury and/or damage to the speaker.
When moving the speaker, do not hold the port as it might cause personal injury and/or
damage to the speaker.
•
•
•
•
–
–
–
•
•
•
•
•
Any time you note distortion, reduce the volume control on your amplifier to a lower setting.
Never allow your amplifier to be driven into “clipping”. Otherwise the speaker may be
damaged.
When using an amplifier with a rated output power higher than the nominal input power of
the speaker, care should be taken never to exceed the speaker’s maximum input.
Do not attempt to clean the speaker with chemical solvents as this might damage the finish.
Use a clean, dry cloth.
Do not attempt to modify or fix the speaker. Contact qualified Yamaha service personnel
when any service is needed. The cabinet should never be opened for any reasons.
As this unit is heavy, whenever it is moved, two people are required to transport it safely.
Place the speaker away from a TV. If not, the TV screen may become blurred.
When choosing a power amplifier for use with this device, make sure that the output power of
the amplifier is lower than the power capacity of this device. Malfunction or fire may occur.
Even if the output power of the amplifier is lower than the power capacity of this device
(program), use of excessive input signals resulting clipping may cause damage to the device.
Malfunction or fire may occur especially when the following sounds or noises are generated:
feedback, when using a microphone
continuous and extreme volume sound from a musical instrument
extreme continuous distorted sound
noise caused by plugging/unplugging the cable while the amplifier is turned on
Secure placement or installation is the owner’s responsibility. Yamaha shall
not be liable for any accident caused by improper placement or installation of
the speaker.
•
•
•
•
•
•
•
•
–
–
–
–
•
Type ...........................................2-way 3-speaker bass reflex speaker system
Driver <KMS-910> ...................................... 7.7 cm (3”) cone type tweeter × 2
25 cm (10”) cone type woofer
<KMS-710> ....................................... 7.7 cm (3”) cone type tweeter × 2
20 cm (8”) cone type woofer
Impedance ................................................................................................ 8 (ohm)
Frequency response <KMS-910> ............................. 55 Hz to 20 kHz (–10 dB)
<KMS-710> ............................. 60 Hz to 20 kHz (–10 dB)
Rated input power <KMS-910> ............................................................ 150 W
<KMS-710> .............................................................. 80 W
Maximum input power <KMS-910> ....................................................... 450 W
<KMS-710> ....................................................... 240 W
Crossover frequency <KMS-910> ...........................................2.5 kHz, 15 kHz
<KMS-710> ...........................................2.6 kHz, 15 kHz
Dimensions (W Ă— H Ă— D) <KMS-910> ............................ 501 Ă— 320 Ă— 318 mm
<KMS-710> ............................ 452 Ă— 259 Ă— 284 mm
Weight <KMS-910> ...............................................................................12.2 kg
<KMS-710> ....................................................................................8 kg
Specifications are subject to change without notice due to product
improvements.
Care should be taken not to exceed the input power values noted above.
The woofer employs a material for the surround to achieve high sound
quality. The useful life of the speaker surround depends on usage conditions
and environment (especially ultraviolet radiation exposure and humidity),
etc. When the speaker surround reaches the end of its useful life, refer to your
dealer for replacement.
•
•
•
SPECIFICATIONS
You can also use the screw holes on the top of the speaker for installing the
speaker on the ceiling by using commercially available mounting brackets.
To fix the speaker to a mounting bracket, use the screws inserted to the screw
holes of the speaker as the factory default status. If you use the commercially
available screws, use the screws that matches to the following specifications:
Screw type ...........................................................M8
Screw length .................................... 35 mm or more 100 mm
Caution
The required length of a screw differs depending on the mounting bracket to
be used. Select a screw which is suitable for use with the mounting bracket
and can be fully inserted into the hole on the speaker.
As this product is heavy, do not attach them to thin plywoods or soft wall
surface materials, as the screws may tear free from flimsy surfaces, causing
the speakers to fall and be damaged, or result in personal injury.
Do not fasten the speakers to the ceiling with nails, adhesives, or other
unsound hardware. Long-term use and vibrations may cause them to pull
free.
To avoid accidents resulting from tripping over loose speaker cables, fix
these to the wall along with the speakers.
•
•
•
•
MOUNTING THIS SPEAKER SYSTEM TO A CEILING
REMOVING THE FRONT COVER
1 1 Remove the screws (4 pieces) from both sides (figure ).
2 Grasp the front cover with your fingers with your thumbs at the top edge
of the main unit, then gently push with your thumbs (figure ) to pry the 2
cover loose. Do the same for the bottom edge.
3 3 Pull the cover straight out from the speaker (figure ).
CONNECTING TO YOUR AMPLIFIER
Caution
BEFORE MAKING CONNECTIONS, MAKE SURE THAT THE AMPLIFIER IS SWITCHED OFF.
Connect the cables as shown below.
Black
Red
Right
speaker
Left
speaker
Speaker output terminals
of the amplifier
Loosen Tighten 10 mm
Notes
Do not let the bare speaker wires touch each other as this could damage the
speaker or the amplifier, or both.
Do not insert the insulation into the hole. Sound may not be produced.
â–
When using a banana plug
Note
Use a suitable instrument to remove the cover. Removing it with your bare
hands may hurt your fingertips.
Banana plug
Cover
1
3
2
•
•
To reattach, do these steps in reverse order. The 4 pegs inside the cover should
be set in the corresponding holes on the speaker.
Note
Be careful not to scratch yourself with the edge of the front cover.
2 31
Produktspezifikationen
| Marke: | Yamaha |
| Kategorie: | Karaoke-System |
| Modell: | KMS-710 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Yamaha KMS-710 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Karaoke-System Yamaha
22 September 2024
19 September 2024
10 September 2024
28 Juli 2024
27 Juli 2024
26 Juli 2024
26 Juli 2024
25 Juli 2024
22 Juli 2024
15 März 2024
Bedienungsanleitung Karaoke-System
- Karaoke-System Nedis
- Karaoke-System SilverCrest
- Karaoke-System Denver
- Karaoke-System König
- Karaoke-System MarQuant
- Karaoke-System Trevi
- Karaoke-System Pyle
- Karaoke-System Aiwa
- Karaoke-System Auna
- Karaoke-System Caliber
- Karaoke-System Lenco
- Karaoke-System Livoo
- Karaoke-System Prixton
- Karaoke-System Fenton
- Karaoke-System Tripp Lite
- Karaoke-System Gemini
- Karaoke-System Skytec
- Karaoke-System Vonyx
- Karaoke-System Vtech
- Karaoke-System Ketron
- Karaoke-System Skytronic
- Karaoke-System ION
- Karaoke-System HQ Power
- Karaoke-System Ibiza Sound
- Karaoke-System Pyle Pro
- Karaoke-System Qtx
- Karaoke-System GPX
- Karaoke-System IDance
- Karaoke-System Media-tech
- Karaoke-System Pure Acoustics
- Karaoke-System Steren
- Karaoke-System Sunstech
- Karaoke-System Singing Machine
- Karaoke-System Vocopro
- Karaoke-System MusicMan
- Karaoke-System Bigben Interactive
- Karaoke-System MadBoy
- Karaoke-System Hamilton Buhl
- Karaoke-System EARISE
- Karaoke-System N-Gear
- Karaoke-System Magic Sing
- Karaoke-System Karaoke USA
- Karaoke-System Party Light & Sound
Neueste Bedienungsanleitung fĂĽr -Kategorien-
7 Oktober 2024
2 Oktober 2024
28 September 2024
24 September 2024
10 September 2024
6 September 2024
6 September 2024
4 September 2024
2 September 2024
2 September 2024