Xvive U6 Bedienungsanleitung

Xvive Mikrofon U6

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Xvive U6 (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

PRODUCT SPECIFICATIONS

1. Wireless Type: 2.4 GHz ISM worldwide open band

2. Wireless Range: Up to 90 ft; depends on RF signal absorption,

reection and interference

3. RF Sensitivity: -86 dBm and -92 dBm

4. Total Harmonic Distortion: 0.2%

5. Transmitter RF Output Power: <10 mW E.I.R.P. max

6. Antenna Type: 1/4 wave sleeve dipole, non-removable

7. Number Of Antennas: Transmitter: 1, Receiver: 2

(True diversity for both channels simultaneously)

8. Channel Count: Up to 4

9. Latency: 5 ms

10. High-Resolution Audio: 24-bit / 48 kHz

11. Transmitter Mounting Modes: Clip / Hook+Loop

12. Microphone Polar Pattern: Omnidirectional

13. Frequency Range: 80 Hz – 20 kHz

14. Sensitivity: -32 dB ± 3 dB

15. Dynamic Range: 100 dB

16. Signal-To-Noise Ratio: 100 dB

17. Receiver Analog Outputs: 3.5 mm TRS

18. Receiver Output Gain: 0 dB, -10 dB, -20 dB

19. Charging Voltage & Current: 5V 1A

20. Battery: 3.8V rechargeable Li-ion

Receiver: 420 mAh / Transmitter: 330 mAh

21. Battery Life: 4 hours

22. Dimensions:

Receiver: 39 x 14 x 50 mm / Transmitter: 30 x 13 x 43 mm

23. Weight: Receiver: 29 g (1.02 oz) / Transmitter: 18 g (0.63 oz)

TRANSMITTER

RECEIVER

QUICK START

TRANSMITTER APPLICATION METHOD

U6 is an ultra-compact wireless mic system designed primarily

for video production. The transmitter can be worn discreetly

in two dierent modes: Clip and Hook+Loop. The Clip holds

the transmitter in position on the underside of your shirt for a

very understated look. Alternately, the Hook+Loop method

completely conceals the transmitter underneath your clothing.

Both installation modes are versatile and provide a solution for

any application. The transmitter features a built-in omnidirectional

condenser microphone, and wirelessly transmits crystal-clear,

broadcast-grade digital audio on the 2.4 GHz band to the

camera-mounted receiver. The system’s four-channel design

allows you to use four U6 sets in one area; or, with one set,

having four frequencies to choose from ensures connection if

there are competing wireless devices nearby. U6 is perfect for

video content creation, lmmaking, vlogging, YouTube, live

streaming, and more.

• 2.4 GHz True Diversity wireless system

• Omnidirectional microphone built into the Transmitter

• High-resolution 24-bit / 48 kHz audio

• Up to 4 hours of battery life

• Less than 5 ms latency

• 4 wireless channels

• Dynamic range: 100 dB

• Signal-to-noise ratio: 100 dB

• 3.5 mm / 1/8” TRS output from the receiver to your DSLR or

video camera

• Three receiver output level presets: 0 dB, -10 dB, and -20 dB

• Frequency response: 80 Hz – 20 kHz

•

Solid RF connection over a 90-foot range (actual range depends

on RF signal absorption, reection and interference)

English Manual

U6 COMPACT WIRELESS

MIC SYSTEM

For DSLR Cameras

Channel display

Gain display

Power LED

Gain switch

3.5 mm TRS output

USB charging port

Power and Channel switch

Clip

2. SET UP TRANSMITTER

4. 3-LEVEL OUTPUT GAIN

Please keep the transmitter at

least 10 inches away from your

mouth or audio source.

3. CONNECTING THE RECEIVER

TO A DSLR CAMERA

Slide the receiver’s foot into

the camera’s shoe mount.

Connect the receiver output

to the camera input using

the supplied 3.5 mm TRS

cable.

3.1 CONNECTING THE RECEIVER TO A SMARTPHONE

To connect to a smartphone with a TRRS 3.5 mm / 1/8” jack,

plug one end of the included stereo cable into the receiver,

and the other end into the TRS to TRRS adapter. Plug the adapter

into the smartphone’s headphone jack. If your smartphone

has

a USB-C or lightning connector,

you will need to purchase an

additional adapter (TRRS to USB-C

or TRRS to lightning). You can use

the hook+loop fastener adhesives

to attach the receiver to your

smartphone or tripod/mount.

5. BATTERIES AND CHARGING

CLIP

The U6 system comes with a dual USB charging cable, which

charges the transmitter and the receiver at the same time. Plug

it into any 5V USB charger adapter or USB power source.

Note: Turn o the power while charging. Please do not use U6

while charging, as this may reduce your battery life.

HOOK+LOOP

There are two small hook fastener adhesive strips on the

transmitter. Stick a loop sticker on the inside surface of your

clothing, or anywhere else within range of the transmitter

(about 10 inches from your mouth). Then simply press the

transmitter against the loop piece.

Stick the Hook pieces on the transmitter

Fasten the clip to the transmitter by pressing the round nubs

on the clip into the round sockets on the transmitter.

When the transmitter is clipped underneath your shirt or

other clothing, it may create a slight protrusion, but will be

generally unnoticeable.

about

10 inches

* Always store at room temperature

* When storing the unit, please check the battery charge

level regularly and charge if necessary.

Connect to a

power supply

or USB power

outlet

POWER STATUS LED INDICATES POWER STATUS

LED o = 100% ~ 30%

Solid red = 29% ~ 11%

Flickering red = less than 10%

Channel display

Power LED

Microphone

USB charging port

Power and Channel switch

Hook fastener

Clip sockets

Fur windshield Clip Loop fastener piece

Loop fastener piece

Hook fastener piece

Dual USB charging cable

3.5 mm to 3.5 mm stereo cable

(for sending audio to a DSLR camera)

3.5 mm Female TRS to 3.5 mm Male TRRS adapter

(for sending audio to a TRRS-input smartphone or laptop)

Hook

WARNING

Hook fastener material can catch onto knit or loosely

woven fabrics (e.g. wool sweaters) and cause damage, so

avoid making contact between the hook fastener on the

back of the transmitter and your clothing. The adhesive on

the back of the loop fastener piece can leave a residue on

some fabrics. Avoid leaving the loop fastener stuck on

clothing for a long time. Please use with caution.

FEATURES

1. POWER AND CHANNEL

Turn the units on by pressing and holding the power button

for 3 seconds, until the display screen lights up. Short presses

on the power button will change to the next channel (check

the 1-4 channel display). Make sure you are set to the same

channel on both the transmitter and the receiver. When the

units are successfully paired, the green LED on the receiver

will illuminate.

POWER ON / CHANNEL

TransmitterReceiver

2nd oor, Building 12, Xicheng Industrial Area, Xixiang Town,

Baoan District, Shenzhen Guangdong China. 518101

WARNING: BEFORE USING YOUR

XVIVE WIRELESS AUDIO FOR VIDEO SYSTEM,

CAREFULLY READ THE OPERATING INSTRUCTIONS:

IMPORTANT SAFETY INSTRUCTIONS:

PLEASE READ THESE INSTRUCTIONS AND

KEEP THEM IN A SAFE PLACE

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Radio Approvals: FCC Part 15.249, FCC Part 15 B, RSS-210

(Canada), EN 300 440 (Europe), EN 301.489 (Europe)

SAFETY INSTRUCTIONS FOR LITHIUM-ION

RECHARGEABLE BATTERIES

2.4 GHZ WIRELESS OVERVIEW

AND INTERFERENCE

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

REMOVE SCREWS.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.

This Class B digital apparatus complies with Canadian ICES-003.

IC Caution: RSS-Gen Issue 4 December "&" CNR-Gen 4e Décembre:

This device contains licence-exempt transmitter(s)/receiver(s)

that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference

that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le

présent appareil est conforme aux CNR d’Innovation, Sciences

et Développement économique Canada applicables

aux

appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes:

1. L’appareil ne doit pas produire de brouillage;

2. L’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre

le fonctionnement.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,

AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE

RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

WARNING:

Changes or modications not expressly approved in writing

by Xvive may void the user’s authority to operate this

equipment.

RF EXPOSURE STATEMENT:

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

NOTE:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide

reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

There is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician

for help.

1. Observe all instructions in the U6 manual carefully.

2. Do not to perform service operations beyond those

described in the U6 manual. Service is required when the

apparatus has been damaged in any way, such as:

• Liquid has been spilled or objects have fallen into the

apparatus;

• The unit has been exposed to rain or moisture;

• The unit does not operate normally, or performance

changes in a signicant way;

• The unit is dropped or the enclosure is damaged

3. Do not place near heat sources, such as radiators,

heat registers, or appliances which produce heat.

4. Guard against objects or liquids entering the device.

Do not use or place unit near water.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specied by Xvive.

7. Prolonged listening at high volume levels may cause irreparable

hearing loss and/or damage. Always be sure to practice

“safe listening.”

If abused or misused, the rechargeable batteries may leak. In

extreme cases, they may even present a risk of explosion, re,

heat, smoke or gas. Xvive does not accept any liability for

damagearising from abuse or misuse.

• Keep away from children.

• Only charge rechargeable batteries with chargers

recommended by Xvive.

• Observe correct polarity.

• Pack/store charged rechargeable batteries so that the

terminals cannot contact each other (danger of shorting

out/re hazard).

• Do not expose to moisture.

• Switch rechargeable battery-powered products o after use.

• Only charge rechargeable batteries at ambient

temperatures between 10°C/50°F and 40°C/104°F.

• When not using rechargeable batteries for extended

periods of time, charge them regularly (about every three

months).

• Do not mutilate or dismantle.

• Do not heat above 60°C/140°F, e.g. do not expose to

sunlight or throw into a re.

• Immediately remove rechargeable batteries from obviously

defective products.

• Do not continue to use defective rechargeable batteries.

• Only use rechargeable batteries specied by Xvive.

• Dispose of rechargeable batteries at special collection

points or return them to your specialist dealer.

• Store the products in a cool and dry place at room

temperature (approx. 20°C/68°F).

• Remove the rechargeable batteries if the products will not

be used for extended periods of time.

CERTIFICATION

INFORMATION ABOUT COLLECTION AND

DISPOSAL OF OLD ITEMS AND USED BATTERIES

Xvive Corporation Ltd. [Xvive] warrants our products to be free

of defects in materials and workmanship in normal use for a

period of one (1) year from the date of original purchase.

Please visit to register your new purchase.https://www.xvive.com

Xvive will, at its sole discretion, or in aliation with our

authorized retailers, repair or replace at no charge, any unit

that is inspected by Xvive or an aliated Xvive service center

and deemed to be defective within the warranty period.

This warranty is non-transferrable.

This warranty is only valid to the original purchaser, only

when purchased “new-in-box” from an Authorized Xvive

Dealer and with a valid proof of purchase bearing the

purchase date.

Within the USA:

• All Xvive warranty claims should be made with the retailer

from which the unit was purchased. This applies to both

retail stores and online retailers.

Outside of the USA:

• For all warranty and non-warranty claims, the purchaser

should contact the Authorized Xvive Retailer from which

the unit was purchased within the country or province in

which it was purchased for information on how to obtain

warranty or non-warranty service.

This limited warranty does not cover the following:

• Products that have been modied in any way;

• Any products whose serial numbers have been altered or

removed;

• Exterior cosmetic damage or damage to the nish due to

misuse or normal wear and tear;

• Products that were purchased as “used”, items listed as

demo stock or refurbished items;

• Damage to the product or parts caused by improper storage

by the user;

• Any freight charges (from or to the retailer);

• Shipping Damage:

- Shipping damage claims must be led with the freight

carrier (such as UPS, FedEx).

- Notify the freight carrier immediately of any shipping

damage upon receipt of damaged items to begin the

claim process.

- We also recommend reporting any shipping damage claim

within (48) hours of receipt to the Authorized Retailer from

which the item was purchased.

- Keep all original documents and packing materials until

freight damage claim has a nal resolution.

For units returned to Xvive USA:

• The item must be returned in the same format in which it

was purchased. If a system containing a transmitter and

receiver was purchased, then both units will need to be

returned together.

• The purchaser will pay all freight charges to return the

original item to Xvive USA or its aliated service centers.

• If the unit is deemed to be covered by this warranty, Xvive

will ship the repaired or replacement unit to the purchaser

free-of-charge and without any additional freight charges.

• If the unit is deemed to NOT be covered by this warranty,

other charges plus return freight charges will apply.

EXCEPT AS EXPRESSLY SET FORTH ABOVE IN THIS LIMITED

WARRANTY, XVIVE MAKES NO OTHER EXPRESS OR IMPLIED

WARRANTIES TO THE EXTENT PERMITTED BY LAW. XVIVE

ASSUMES NO LIABILITY FOR PROPERTY DAMAGE RESULTING

FROM FAILURE OF THIS PRODUCT NOR ANY LOSS OF

INCOME, SATISFACTION, OR DAMAGES ARISING FROM THE

LOSS OF USE OF SAME DUE TO DEFECTS OR AVAILABILITY OF

SAME DURING SERVICE.THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE OR BY COUNTRY OR

PROVINCE.

For warranty inquiries not covered in this policy, please contact

support@xvive.com

Hereby, SHENZHEN FZONE TECHNOLOGY CO., LTD,

declares that this type of equipment is in compliance

with the essential requirements and other relevant

provisions of Directive 2014/53/EU

These symbols on the products, packaging, or on

any documents in the package mean it is incorrect

to mix the used electrical and electronic products

and batteries with general household garbage.

To protect our environment, please take old

products and used batteries to proper collection

places, and follow your national legislation and

the Directives 2012/19/EU and 2006/66/EC.

To deal with these old products and batteries

properly, please help to save valuable resources

and

prevent any possibility of side eects on human

health and our environment due to the inappropri-

ate disposal of the old products and used batteries.

You can contact your local authority for getting

more helpful information on how to dispose the

recycling and collection of the old products and

batteries.

[For business users in the European Union]

If you want to discard electrical and electronic item,

please contact your dealer or supplier for further

information.

[Information on Disposal in other Countries

outside the European Union]

These symbols are only valid in the European

Union. Please contact your local authorities or

dealer for more information on disposal of old

items and used batteries.

XVIVE CUSTOMER SERVICE

Email: support@xvive.com

Or, you can nd your local distributor at www.xvive.com

ONE-YEAR LIMITED WARRANTY

SHENZHEN FZONE TECHNOLOGY CO., LTD.

U6 operates on the 2.4 GHz ISM band, which is also used by Wi-Fi,

Bluetooth, and other wireless devices. 2.4 GHz is an open band

and, as such, does not require a license to be used worldwide.

Tips and Methods to Improve Wireless System Performance

1) Keep more than 3 metres of distance between the U6 receiver

unit and Wi-Fi transmitters, such as routers.

2) If you experience interference from Wi-Fi devices in the vicinity,

try changing to a dierent channel on the U6 transmitter and

receiver.

3) If necessary, shorten the distance between the transmitter and

receiver units.

WARNING:

and Reproductive Harm -

Cancer

www.P65Warnings.ca.gov

Produktspezifikationen

Marke:	Xvive
Kategorie:	Mikrofon
Modell:	U6

Brauchst du Hilfe?

Wenn Sie Hilfe mit Xvive U6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Mikrofon Xvive

Xvive LV2 Bedienungsanleitung

4 September 2024

Xvive LV1 Bedienungsanleitung

4 September 2024

Xvive U2 Bedienungsanleitung

19 August 2024

Xvive U3 Bedienungsanleitung

18 August 2024

Xvive U6 Bedienungsanleitung

18 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024

AKG WMS420 Bedienungsanleitung

13 Oktober 2024

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024

Audio-Technica ATM610a Bedienungsanleitung

8 Oktober 2024

Omnitronic AAB-10 Bedienungsanleitung

8 Oktober 2024

AKG CBL201B Bedienungsanleitung

8 Oktober 2024

Audio-Technica BP894x Bedienungsanleitung

7 Oktober 2024