Xiaomi MiJia Smart Temperature Control Kettle Bedienungsanleitung

Xiaomi Nicht kategorisiert MiJia Smart Temperature Control Kettle

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Xiaomi MiJia Smart Temperature Control Kettle (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 159 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
MiJia Smart Kettle Overview
XIAOMI-MI.COM
Smart connection
Lid
Inner part
Body
Base
Open lid
button
Handle
Boiling indicator
Boil/Hold a
temperature
button
Power plug
The inside of the pot and lid are made from 304
stainless steel, allowed for contact with food: austenitic
stainless steel, 06Cr19Ni10
1. Turn on Bluetooth on your phone;
2. In Mi Store get «Mi Smart Home» app or scan the QR-
code to download a client application;
3. Make sure that electric Mi Smart Kettle is on. Open the
app and connect the devices to each other, guided by the
instructions of the client interface.
Using
1. Click on button to open a lid of
the kettle, add water.
The water level must not
exceed the maximum mark,
and should not be below the
minimum.
2. Close a lid, put the kettle on a base.
If there is a normal contact between the
kettle and base, the LED blinks once,
and then turn o.
3. Click on the «Boil» or «Keep
temperature» button, select the
heating mode.
Keep temperature mode setup
instructions, see on the next
page.
4. When water boils, «Boil» indicator turns o,
then water heating will stop and sound a speciî‚¿c
signal; when «Keep temperature» mode is on, water
temperature reaches the level, you set before, and
the kettle sounds a speciî‚¿c signal. Orange indicator of
«Keep temperature» mode lights up and turns on.
XIAOMI-MI.COM
Setting Keep temperature mode
1. Lowering the temperature of boiling water to
set value (the default).
By clicking «Keep temperature» button rst
boil the water and then water temperature will
decrease to a set index. Duration of keeping of
temperature - 12 hours (recommended for use
with tap water).
2. Water is heated to a set index.
By clicking «Keep temperature» button, kettle
heats the water to the set index and will keep
set temperature of water (recommended to use
puriî‚¿ed water).
1. According a factory setting water temperature kept at 50C,
a temperature preservation duration - 12 hours.
2. Change device settings and set the desired temperature
using the Mi Home APP.
Maintenance
1. Add a vinegar.
Pour 0.5 l of vinegar into
the kettle and leave for 1
hour.
2. Pour o a vinegar.
Pour the vinegar out of
the kettle and remove the
sludge residues using a
damp cloth.
3. Boil water.
Boil water in a kettle and
then pour it o. Repeatedly
wash the kettle 4-5 times.
4. Wipe dry the kettle.
Use a dry cloth to wipe the
outside of the kettle.
Precautions:
1. Make sure it is disconnected from a power supply and
wait until it cools down before cleaning the kettle.
2. To extend a service life of the kettle, it must be cleaned
regularly from the sediment.
3. If water quality is poor, repeat an above procedure. In no
case do not use an iron brush and any abrasive chemicals
to clean the kettle.
4. Do not immerse the kettle and its base in water. Keep
the outside of the pot dry.
* Keep your software of the device actual, to discover even
more new features and optimize a performance of the
electric kettle.
Warranty
Warranty service is carried out in accordance with the law on
«consumer rights» and the «Law on the quality of products.»
The warranty service includes:
1. Within 7 days from the date of purchase, in case of a
problem from the «List of faults», Xiaomi service center
determines the cause of the problem, then you can choose a
free replacement product or a refund.
2. Within 8-15 days of purchase, in case of a problem of
«fault list» Xiaomi service center denes the problem, then
you choose a free replacement or repair of the goods.
3. Within 12 months from the date of purchase, in case of
a problem from the «List of faults», Xiaomi service center
deî‚¿nes the problem, then you are given a free repair.
List of faults
• Power Problems;
• Problems with hot water;
• Capacity problems with temperature;
• Problems with a termination of water heating;
• Water leakage, current leakage.
Terms, that are not included in the warranty
service
1. Completion of service, falling, neglect, abuse, liquid
ingress, an accident, or if broken or stained a label and
labeling devices;
2. The warranty period has expired;
3. Damage caused by force majeure;
4. Failures, which do not correspond to the «List of faults» of
Xiaomi center service;
5. The failure of the device or its components from the
«Fault list», which arose in connection with the human
factor, which interfere with normal operation.
Main speciî‚¿cations
XIAOMI-MI.COM
XIAOMI-MI.COM


Produktspezifikationen

Marke: Xiaomi
Kategorie: Nicht kategorisiert
Modell: MiJia Smart Temperature Control Kettle

Brauchst du Hilfe?

Wenn Sie Hilfe mit Xiaomi MiJia Smart Temperature Control Kettle benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Xiaomi

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-