WyreStorm NHD-100-TX Bedienungsanleitung
WyreStorm
Digital-Decoder
NHD-100-TX
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr WyreStorm NHD-100-TX (32 Seiten) in der Kategorie Digital-Decoder. Dieser Bedienungsanleitung war fĂźr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
WyreStorm HD over IP Solutions
Part Number NHD-000-CTL
NHD-100-TX
NHD-100-RX
HD over IP AV distribution solution
utilising H.264 compression for AV
switching over a LAN
Instruction Manual
Thank you for choosing this WyreStorm product.
Please read these instructions carefully before installing to avoid complications later.
2Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343
CONTENTS
Contents
1 Introduction
2 Features
3 Safety Precautions
4 In the Box
5 Before Installation
6 Speciîcations
7 Panel Description
8 Connection
9 Typical Application
i. One Encoder to One Decoder
ii. One Encoder to Multiple Decoders
iii. Multiple Encoders to Multiple Decoders
10 Switch Settings and Requirements
11 NHD-000-CTL Browser Conîguration & Control
i. Matrix Switching Commands
ii. TX/RX Settings
iii. CTL Settings
12 NetworkHD⢠Console Conîguration
i. NetworkHD⢠Console Software Installation
ii. Searching Devices
iii. Setting Device Parameters
iv. Device Settings
v. Creating Scenes
vi. Conîguration File Management
vii. Serial Control
viii. CEC Control
ix. Viewing the Encoders Preview Stream
x. Log
13 Additional Information
14 NetworkHD⢠Protocol
15 Troubleshooting
16 FAQ
17 Maintenance
18 Provided Service
19 Mail In Service
20 Warranty
21 Warranty Limits and Exclusions
22 Disclaimer
23 Installation Reference Logs
3
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
INTRODUCTION, FEATURES AND SAFETY PRECAUTIONS
1. Introduction
WyreStormÂŽ NetworkHD⢠100 is our premier H.264 HD over IP distribution platform. With its simple system conîguration
and robust feature set, it provides the best value in networked video distribution, without compromising quality. Enabling
the distribution of HDMI over a dedicated IP network switch for commercial AV applications.
NetworkHD⢠100 facilitates the transmission of an HDMI 1.3 signal (including Full HD 1080p video with 2.1 audio) to any number of
HDMI displays over standard Ethernet (Cat5e/6) infrastructure.
The modular system architecture of NetworkHD⢠100 removes the limitations of a traditional îxed platform I/O matrix system without
compromising quality or reliability, whilst oîering signiîcant cost savings when designing large scale installations. Adding encoders and
decoders as required enables the system to grow with the needs of the application.
NetworkHD⢠100 uses multiple technologies to automatically conîgure and discover system components, making setup a breeze.
Functioning on 10/100 or Gigabit Layer2 SMART switches, NetworkHD⢠100 does not require advanced integrator network experience
to install, nor does it require complicated VLAN conîgurations or PC software, making it one of the simplest HD over IP systems
available. Conîguring network switches takes minutes through your browser and even the largest distributions can be quickly and easily
conîgured and expanded.
The NHD-000-CTL controller creates a simple, single interface to conîgure, manage and control the entire NetworkHD⢠100 system,
whilst capable of integrating with leading control brands including WyreStorm Enado⢠for the highest quality total HD distribution and
control solution over a network.
For further information on this product and other WyreStorm ranges, visit our website or download our latest product guide at
wyrestorm.com
2. Features
⢠Highly scalable, visually lossless HD over IP solution using the most eîcient compression technology to allow for very large
commercial AV deployments
⢠Plug and Play setup with automatic networking conîguration and auto discovery of components
⢠Quick Sync⢠technology for virtually instantaneous, seamless switching
⢠CEC One-Touch Play & Standby or RS-232 control of connected displays
⢠Supports video previewing on a PC or third party device. NetworkHD⢠100 outputs simultaneous IP streams. One full resolution for
the NHD-100-RX. The other small one supports resolutions of 352 x 288 @ 5Hz to easily preview a video from the encoder on a
PC or Mac
⢠Use with the new NHD-000-CTL controller for simple conîguration and control via the LAN, as well as for allowing control from
third party control system such as AMX, Crestron, Control4, RTI & WyreStorm⢠Enado.
⢠Supports PoE to enable remote powering from POE network switches, eliminating the need for a nearby power outlet
⢠Full PC control suite available free of charge at wyrestorm.com
⢠Supports HDCP
⢠Conîgurable encoding bit rate up to 40 Mbps
3. Safety Precautions
WARNING
To reduce the risk of îre, electric shock
or product damage:
1. Ventilation is crucial to consistent operation of this product. Units should be mounted with at least (2.5cm) 1 inch clearance of
vents. WyreStorm highly recommends the use of the NHD-000-RACK for absolute correct mounting best practice.
2. Do not expose this apparatus to rain, moisture, sprays, drips or splashes and ensure that no objects containing liquids are placed
on the apparatus, including cups, glasses and vases.
3. Do not place this unit in a conîned space such as enclosed shelving, cabinets or bookshelves. Ensure the unit is adequately
ventilated.
Produktspezifikationen
Marke: | WyreStorm |
Kategorie: | Digital-Decoder |
Modell: | NHD-100-TX |
Breite: | 200 mm |
Tiefe: | 94 mm |
Gewicht: | 480 g |
AC-Netzadapter: | Ja |
Produktfarbe: | Schwarz |
HĂśhe: | 25 mm |
Gleichstrom-Anschluss (DC): | Ja |
Betriebstemperatur: | 0 - 45 °C |
Relative Luftfeuchtigkeit in Betrieb: | 10 - 90 % |
Anzahl Ethernet-LAN-AnschlĂźsse (RJ-45): | 1 |
Stromverbrauch (max.): | 6 W |
Betriebsanleitung: | Ja |
Anzahl Kanäle: | 1 Kanäle |
LED-Anzeigen: | Ja |
Temperaturbereich bei Lagerung: | -20 - 70 °C |
Luftfeuchtigkeit bei Lagerung: | 10 - 90 % |
RS-232 port: | 1 |
UnterstĂźtzte Grafik-AuflĂśsungen: | 640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1400 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080) |
UnterstĂźtzte Videoformate: | AVC, H.264, MPEG4 |
Maximale Video-AuflĂśsung: | 1920 x 1200 Pixel |
Brauchst du Hilfe?
Wenn Sie Hilfe mit WyreStorm NHD-100-TX benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Digital-Decoder WyreStorm
13 Mai 2024
Bedienungsanleitung Digital-Decoder
- Digital-Decoder Belkin
- Digital-Decoder Hama
- Digital-Decoder TechniSat
- Digital-Decoder Schwaiger
- Digital-Decoder Denver
- Digital-Decoder KĂśnig
- Digital-Decoder SEG
- Digital-Decoder Megasat
- Digital-Decoder Ferguson
- Digital-Decoder Loewe
- Digital-Decoder Strong
- Digital-Decoder GOCLEVER
- Digital-Decoder Xoro
- Digital-Decoder Opticum
- Digital-Decoder Edision
- Digital-Decoder Humax
- Digital-Decoder Kathrein
- Digital-Decoder Wisi
- Digital-Decoder Black Box
- Digital-Decoder EVOLVEO
- Digital-Decoder Vodafone
- Digital-Decoder Engel Axil
- Digital-Decoder Hikvision
- Digital-Decoder Planet
- Digital-Decoder Dreambox
- Digital-Decoder TechnoTrend
- Digital-Decoder Media-tech
- Digital-Decoder SetOne
- Digital-Decoder Vantage
- Digital-Decoder Teradek
- Digital-Decoder Hanwha
- Digital-Decoder Crestron
- Digital-Decoder Majestic
- Digital-Decoder I-CAN
- Digital-Decoder Golden Media
Neueste Bedienungsanleitung fĂźr -Kategorien-
8 August 2024
24 Juni 2024
24 Juni 2024
24 Juni 2024
20 Juni 2024
20 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024
7 Juni 2024