WLtoys XK X250 Alien Bedienungsanleitung

WLtoys Drohne XK X250 Alien

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für WLtoys XK X250 Alien (8 Seiten) in der Kategorie Drohne. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
CONTENTS OF THE BOX:
• 1 x Quadcopter
• 1 x 2.4 GHz remote (6x AA-batteries not included)
• 1 x 3.7V 780 mAh Li-po battery
• 4 x Spare propeller
• 1 x Charger
• 1 x Manual
SPECIFICATIONS:
• 2.4GHz Assembled quadcopter drone Ready-to-fly
• 6-axis Gyroscope
• 4 main engines
• 1 Li-po Battery 3.7V 780mAh
• Height: 61 mm
• Length: 194 mm
• Width: 194mm
• Weight: 100 g
Specifications
Safety precautions
• Children should only use this model under the supervision of an adult
• Keep hands, face, hair and clothes away from blades.
• Stand out of reach of moving parts of the copter
• Always fly in an open and safe environment where you will not cause any danger to others
• For the remote control, we recommend AA batteries with a voltage of 1.5 to 1.2 volts
• Before each flight, test the distance limit of the transmitter
• Keep these instructions safe
• Always follow local laws and regulations! Contact your reseller when in doubt.
• This model is not suitable for children under 14 years and contains small parts
• After using the copter ALWAYS disconnect the battery and remove it from the device
• Read the manual carefully and completely
• The model and the transmitter must be switched off after use
• For people without experience, we recommend that you learn to fly with an experienced user during your first flights
XK X250 Alien
INSTRUCTION MANUAL
Copyright WLtoys.eu | DroneX BV
The user must return used batteries and rechargeable batteries.
It is forbidden to dispose of used batteries in the bins containing
household waste! Batteries / accumulators containing
hazardous substances are marked with the crossed out wheelie
bin. The symbol indicates that the product should be recycled.
The chemical symbols for the respective hazardous substances
are Cd (cadmium), Hg (mercury), Pb (lead). The used batteries
can be disposed for free of charge at collection points in your
community, stores or wherever batteries are sold. You are kindly
requested to conform to your legal obligations and contribute to
the protection of our environment.
- The battery should not be placed near children (unless you have an adult supervision)
- Touching of damaged batteries can cause injury. If there is contact with skin or eyes, seek medical attention immediately!
- Do not charge directly after the flight or when the battery is warm
- Do not leave charging without supervision
- Always charge the battery to 100%
- Ensure that the battery wires are not in contact to avoid a short-circuit
- The ignition wires of the battery must not be modified or damaged
- Never damage the battery mechanically (this could cause an explosion)
Battery recycling recommendations
- Keep the batteries out of reach of children
- Unequally charged batteries or different battery types should not be used together
- Use recommended batteries or similar
DO NOT FLY:
- Around people or animals
- Around large groups of people
- In limited visibility or dark conditions
- Winds above 2 Beaufort
- Near high voltage pylons and / or other types of cabling
- During thunderstorms, rain or high humidity. The device is not water-resistant.
For the sensitive and rational conservation, protection and improvement of the quality of the environment, protection of human
health and the preservation of natural resources, the user must send an unusable product to relevant facilities created to this
purpose in accordance with the law.
The crossed out wheelie bin means that the product must be recycled (WARNING: do not throw it in your bin).
Li-po Battery instructions
Battery charging
- Non-rechargeable batteries should not be recharged
- The technical design of the battery must not be changed
- After using the product, remove the batteries if you will not use it again for a long period of time
- This model is equipped with a rechargeable Li-po Battery. Li-po batteries require special attention, follow the manual
- The batteries must be charged with the charger supplied by WLtoys
- When charging the battery, always ensure that you do so on a non-combustible surface
- The terminals must not be short-circuited
Copyright WLtoys.eu | DroneX BV
1. Charging wire
2. LED
3. Li-po Battery
Plug the charger into a wall socket and connect the battery to
the charger. This can only be done in one way: by firmly
connecting the charging cable. If the green light is on, the
battery is fully charged and can be disconnected. Then do not
forget to unplug the charger from the wall socket.
Green LED = Charged battery
Orange LED = Charging battery
Red LED = Battery is empty / Charging battery
Input : 220V
Charging Current : 500mA
Full Voltage: 4.2 +/- 0.03V
1: Power LED
2: Short press: Return to home
Long press: Headless mode
3: Speed control
Press: Rudder conversion
4: Throttle trim
5: Yaw trim
6: LCD display
7: Antenna
8: Power switch
9: Short press: Photo
Long press: Video
10: Direction control
Short press: One key rolling
Long press: Lighting control
11: Forwards and backwards trim
12: Crab trim
Activation for the flight
Remote Control / Transmitter
The headless mode means that the quadcopter's direction of flight seen from your viewpoint follows the controls directly, no matter
in which direction the quadcopter is pointing. This is also referred to as 'Care Free' (CF) mode. This is usually done with a digital
compass. So if you press the stick on the RX to the left the quadcopter will fly to the left from your viewpoint. Without headless
mode the quadcopter would fly to the direction which is on the left side of the quadcopter, so if the quadcopter is pointing towards
you it would fly to the right.
1. Put the battery in the drone quadcopter and plug it to the connector of the drone.
2. Move the throttle (left stick in mode 2) down and turn on the remote control. (when beeping follow the activation method
without throttle)
4. Move the throttle up and down, then the indicators light continuously and the connection is established between the drone and
the transmitter.
Warning : Always place the battery on a heat resistant surface and never leave it unattended!
Headless mode
Copyright WLtoys.eu | DroneX BV


Produktspezifikationen

Marke: WLtoys
Kategorie: Drohne
Modell: XK X250 Alien

Brauchst du Hilfe?

Wenn Sie Hilfe mit WLtoys XK X250 Alien benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Drohne WLtoys

Bedienungsanleitung Drohne

Neueste Bedienungsanleitung für -Kategorien-