Wiltec 62453 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Wiltec 62453 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Operation Manual
Foldable Workbench
62453
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 62453 Page 2
The Tool Experts
11 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 62453 Page 3
The Tool Experts
11 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Important safety instructions
Carefully read the instructions and keep them in a safe place so that you can refer to them at any time.
• When assembling the workbench, make sure that the plastic feet are correctly attached to the
frame.
• Make sure that all bolts and screws attached to the bench are securely tightened before each
use.
• If the workbench is collapsed while in storage, the hexagon bolts may need to be loosened
before collapsing. Make sure that the hexagon screws are tightened again before each Note:
use.
• Always keep your work area tidy and well lit. Untidy and too dark work areas increase the risk
of accidents.
• Do not leave tools or other materials on the workbench when not in use.
• Never use the workbench as a stepladder.
• Never stand, sit, or kneel on the workbench assembled.
• Never exceed the maximum load capacity of the workbench of 100 kg (220 lbs).
• Always place heavy loads gently on the work surface so that the load can be absorbed gradu-
ally.
Workbench assembly instructions
1st step: mounting the worktop
1. Connect the bars and worktops with inward-facing notches us-
ing wood screws.
2. Connect the movable feet to the rails with bolts (M8×14), nuts
(M8×P1.2), and washers (16×8×1.2).
2nd step: mounting the base frame and crossbars
1. Connect the crossbars and the base frame using bolts (M6×P1×35), washers (13×6×1.2), and
nuts (M6×P1).
2. Connect the horizontal bar to the base using screws (M5×12), washers (5×0.8), and nuts
(M6×P1).


Produktspezifikationen

Marke: Wiltec
Kategorie: Nicht kategorisiert
Modell: 62453

Brauchst du Hilfe?

Wenn Sie Hilfe mit Wiltec 62453 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Wiltec

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-