Wiltec 50921 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Wiltec 50921 (6 Seiten) in der Kategorie Wasserpumpe. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Operation Manual
Pool Pump
SPP150E, SPP200E, SPP250E
50919, 50920, 50921
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 50919–50921 Page 2
The Tool Experts
08 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual complete, faultless, and up to date, mistakes cannot be entirely avoided.is
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 50919–50921 Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Features
• Pump body, pump cover and impeller are made of high-quality plastic
• Big outlet, high lift, low noise
• Good mechanical seal and durable.
• With over load protection to ensure long lasting working
• With simple suction and discharge pipes.
Application
These water pumps are designed for the circulation and filtration of the small swimming pools (family
use), whirl pools and Sauna pools.
Caution!
• For swimming pools and garden ponds and its protection zone, the use of the pump is only in
permitted with fault current circuit breaker ( according to DIN VDE 100 part 06.92. 30 mA) 702
Please contact a qualified electrician if you have any questions.
• Keep a safe distance to the pool and fix the pump on a stable base plate According to VDE .
standard is observed a safety distance of 2 m.
• The pump has a built- motor protection switch We do not take over any liability for losses in .
through unsuitable use or faulty assembly. The power cable must conform to standards (2) EC
or type H07 RN- according to VDE 0620.the F
Checks before start-up
1. Make sure that the voltage and frequency power supply and pump (see nameplate) are suit-of
able.
2. Make sure that the pump shaft may rotate freely.
3. Fill the pump with water to make sure that the pump body, filter basket, pipes and other con-
nectors are not leaking. Tighten or loose the screws with hands, or tolls if necessary.
4. Open any existing valves pressure and suction lines check that all hoses are connected.in and
5. Please fill the suction pipe and the pump body completely with water.
6. The pump is suitable for clean water with a temperature of max. 35 ℃.
Power supply
Use the pump only on a three-pole socket with 230 V/ . 50 Hz


Produktspezifikationen

Marke: Wiltec
Kategorie: Wasserpumpe
Modell: 50921

Brauchst du Hilfe?

Wenn Sie Hilfe mit Wiltec 50921 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Wasserpumpe Wiltec

Bedienungsanleitung Wasserpumpe

Neueste Bedienungsanleitung für -Kategorien-